Construction of 68.00 mtrs span steel truss bridge over Bathu Khad on Sadoon Kandi road at RD 6/150 under SCSP in Distt Kangra (HP) (SH-Construction of Sub-Structure and Super-Structure including approaches etc only).

Amount

Earth work in excavation for structure (Bridge work) in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks (Where blasting is prohibited) as per drawing and MORTH technical specification Section 300, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantam of water including cleaning of slush which may arrise out during dewatering as directed by the Engineer-in-Charge. including carriage of materials within all leads, lifts and other incidentals. (by manual/mechanical means) The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Earthwork in excavation for structures as per drawing and MORD technical specifications section 300 and 1600 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal of material upto all lead and lift including dressing of sides and bottom and backfilling in trenches with excavated suitable material,as per directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain/ reinforcement concrete in open foundation for all type of structure, plain cement concrete grade M-10 (M-ten) with cement contents not less than 250 Kg (Two hundred fifty kilogram) per cubic metre and graded crushed stone aggregate 40mm (forty millimeters) nominal size on ground or under water and curing complete and including pumping or bailing out water, dewatering, removal of slush as required at site which may arise at the time of laying concrete complete for all heights/depths including the cost of form work complete in all respect as per drawing and MORTH technical specification section 1500, 1700 & 2100 as directed by the Engineer-in-Charge. including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-30 (M-Thirty) designed mix with cement contents not less than 407 Kgs (Four hundred seven kilograms) per cubic metre with 20mm(Twenty milimetres) nominal size graded crushed stone aggregate in sub structure as per drawings and MORTH technical specifications section 1500, 1700 and 2200 including cost of form work and curing complete and as per the entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain/ reinforced concrete M-15 ( M-Fifteen) designed mix with cement contents not less than 275 Kg (Two hundred seventy five kilograms) per cubic metres on ground or under water including curing complete including pumping or bailing out water, dewatering, removal of slush as required at site which may arrise at the time of laying concrete complete for all heights/ depths including the cost of form work in sub-structure as per drawings and MORTH technical specification section 1500,1700 and 2100 as per the entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying filter media with granular material crushed stone aggregate as per specification to a thickness of not less than 600mm (Six hundred millimetre) with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing walls return walls and retaining/breast walls to the full height compacted to firm condition complete as per drawing and MORTH technical specifications clause 2504.2.2 and 710.1.4 of IRC-78 and as per the directions of the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and MORTH technical specifications Section 1600 and 2200 including cutting, bending, binding, straightening and placing in position complete in all respect including cost of binding wire upto any level and as per direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement for bridge work in super structure complete as per drawing and MORTH technical specifications section 1600 and 2300 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire upto any level including hauling of materials in all kind of leads, lifts and other incidental as per the entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-30 (M-Thirty) designed mix with minimum cement contents at the rate 407 Kg (Four hundred seven kilograms) per cubic metre with 20mm(Twenty milimetres) nominal size graded crushed stone aggregate in super structure as per drawings and MORTH technical specifications section 1500, 1700 and 2300 including cost of form work and curing complete in deck slab and wheel guard including hauling of materials in all kind of leads, lifts and other incidental as per the entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete in open foundation for all type of structure complete of nominal mix 1: 4: 8 (One cement: four sand : eight graded crushed stone aggregate 40mm (forty millimeter) nominal size on ground or under water including curing complete and pumping or bailing out water, dewatering, removal of slush as required at site which may arise at the time of laying concrete complete for all heights/depths including the cost of form work complete in all respect as per drawing and MORD technical specification section 800, 900 and 1200 as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax,GST or any other taxes imposed by the Government.

Providing and fixing fabrication and launching steel work rivetted in built up sections including cutting,hoisting, fixing,in position and applying a priming coat of red lead paint in trussed steel bridges upto any thickness/height complete as per drawings and MORTH technical specifications section 1900 and as per direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Supplying, fitting and fixing in position true to line and level cast steel rocker bearing conforming to IRC: 83(Pt.-1) section IX complete including all accessories as per drawing and MoRTH Technical Specifications section 2000 as per direction of Engineer-in-charge including carriage of materials, within all leads and lifts and other incidentrals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Supplying, fitting and fixing in position true to line and level forged steel roller bearing conforming to IRC: 83(Pt.-1) section IX complete including all accessories as per drawing and MoRTH Technical Specifications section 2000 and as per direction of Engineer-in-charge including carriage of materials, within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete in M-15 (M-Fifteen) designed mix with minimum cement contents not less than 275 Kg (Two hundred seventy five kilograms) per cubic metres, leveling course with 40mm (Forty millimetres) broken /crushed stone aggregate below approach slab complete and as per drawings and MORTH technical specifications section 2100, 2700 and as per direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-30 (M-Thirty) mix designed with minimum cement contents not less than 407 Kg (Four hundred seven kilograms) per cubic metre with 20mm(Twenty milimetres) nominal size graded crushed stone aggregate in approach slab as per drawings and MORTH technical specifications section 1500, 1600, 1700 and 2700 including cost of form work and reinforcement for reinforced concrete work and curing complete and as per direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-30 (M-Thirty) designed mix with minimum cement contents not less than 407 Kg (Four hundred seven kilograms) per cubic metre with 20mm (Twenty milimetres) nominal size graded crushed stone aggregate in wearing course including reinforcement and cost of form work and curing complete as per drawings and MoRTH technical specifications section 1500, 1600 1700 and 2700 and as per direction of Engineer-in-charge including carriage of materials, within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying expensaion joints catering maximum horizontal movement upto 40mm (Forty millimetres) complete as per drawing No. PW/CE-N/Bridges (Standard) 90/107-2-R1 and MORTH technical specifications section 2600 and as per direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing in position G.I. pipe railing consisting of IS rolled steel joist, posts, designation IS MB 100 (One hundred) 100x75 (One hundred into Seventy five millimetres) at 2.5m (Two decimal Five metres) interval and three rows of 50mm (Fifty milimetres) diametres steel pipes (light) including fixing in posituion on bridge deck complete as per drawing and technical specifications Clause 1208.2 including carriage of materials in all kinds of leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing drainage spouts complete with 100mm ( one hundred millimeter) dia galvanised mild steel down pipe corrosion resistant structural steel head and grating complete as per drawing and MoRTH technical specifications section 2700 and as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and filling joint sealing compound as per drawing and technical specificatios with coarse sand and 6% (Six percent) bitumen by weight complete in all respect and as per the direction of Engineer-in- Charge including carriage of materials within all leads , lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with ready mixed Nerolac/Asian/Berger paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter complete in all respect as per MoRTH technical specification section 800 and as per the direction of Engineer-in- Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying 100mm (Hundred millimetre) dia P.V.C pipe weep holes in brick masonry/stone masonry, plain reinforced concrete, Abutments, Wing walls, Return walls and retaining/breast walls extended through the full width of the structure with slope I(V):20(H)(One vertical : Twenty Horizontal) towards draining face complete as per drawing and MORD technical specification Clause 709, 1206.6 complete in all respect and as per the direction of Engineer-in- Charge including carriage of materials within all leads , lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Back filling with granular material behind abutments, wing walls, return walls and retaining walls complete as per drawing and MORD technical specifications section 1200, 1600 and as per direction of Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Filling in foundation trenches as per drawing and MORD technical specifications clause 305.3.9 earth filling and as per directions of the Engineer-in-Charge including carriage of materials within all leads and lifts B62 and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Preparation of sub-grade by dressing to camber (earth work for the cutting involved for sub-grade to be paid for separately) in all type of soil complete as per drawing and MORD technical specifications section 300 complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Consolidation of sub-grade with power road roller including making good the undulation etcetera with earth of quarry soil etcetera and re-rolling the sub-grade complete as per drawing and MORD technical specifications section 300 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Construction of granular sub-base by providing well graded materials, spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with three wheel 80-100(Eighty to Hundred) KN static roller to achieve the desired density complete as per drawing and MORD technical specification clause 401 for Grading-I material as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing, laying, spreading and compacting by mechanical means of stone aggregate of size 53mm to 22.4mm (fifty three millimeter to twenty two point four millimeter) Grading-III [75mm( seventy five millimeters) consolidated thickness to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (Eighty to Hundred) K.N. static roller in stages to proper grade and camber, applying and brooming, stone screening type-B of size 11.2mm (eleven point two millimetres) nominal size at the rate of 0.18cum (zero point one eight cubic metres) per ten square metre and to fill up the interstices of coarse aggregate, watering and compacting to the required density as per drawing and M.O.R.D. technical specifications clause 405 and as per the entire specification and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and applying primer coat with BITUMEN emulsion (SS-1) on the prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer @ 0.85 Kg P/Sqm (zero point eight five kilograme) per square metre using mechanical means as per drawing and MORD technical specifications clause 502 including hauling of material in all leads, lifts as per the entire satisfaction and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kgs (Zero decimal two seven five kilogram) per square metre on the prepared granular surface treated with primer and surface cleaned with Hydraulic broom as per drawing and MORD Technical Specification Clause 503. as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing, laying and rolling of open graded premix carpet of 20mm (Twenty millimetre) compacted thickness, composed of Type-A 13.2mm (Thirteen decimal two millimetre) to 5.6mm (Five decimal six milimetre) aggregate for wearing course including loading of aggregate with front end loader heating binder and aggregate in hot mix plant 30/40 (Thirty/Forty) Tonne per hour capacity transporting mixed material with tipper to site of work and laying with paver finisher to required grade and camber and rolling with power road roller 8/10 (Eight/Ten) Tonne using 0.27 cum (Zero point two seven cubic metre) of graded stone aggregate mixed with 14.6 kg (Fourteen point six kilogram) of bitumen binder using VG-10 (Viscosity Grade-Ten) per ten square metre of road surface to required line, grade and level but excluding the cost of Tack coat and seal coat inclusive of all corrective, measures such as laying of profile corrective Coarse for all depth, filling of depression for all depth and construction of super elevation and camber, where required as per MORD technical specifications clause 506 by mechanical means including hauling of materials labour and equipment required to execute the work at site of work within all leads, lifts and other incidentals as per the entire specification and direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying seal coat for sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B manual means as per MORD Technical Specification Clause 508 using VG-10 (Viscosity Grade-Ten) at the rate 6.80 kg (Six decimal eighty kilogram) premixed with 0.06 cum (Zero point zero six ) cubic metre of fine aggregate spread uniformally per 10 sqm (Ten square metres) of road surface including heated in mini hot plant and laying with mixed material and rolling with Power Road Roller 80-100 (Eighty-Hundred) KN static road roller as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

K K Mahajan Constructions