Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.0 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹32.3 L+₹2.0 L (6.56%)Rejected-Finance 0 0 BASANT AVENUE PHASE II PUNJAB GURDASPUR PUNJAB 143505 | GURDASPUR | PUNJAB | 143505 | L2 | Rejected-Finance being higher bid | |
| 3 | L3₹33.6 L+₹3.3 L (11.0%)Rejected-Finance 129 A NICHLI CHOWKI DEVI NAGAR SECTOR 32 PANCHKULA HARYANA 134109 | PANCHKULA | HARYANA | 134109 | L3 | Rejected-Finance being higher bid | |
| 4 | L4₹34.0 L+₹3.7 L (12.1%)Rejected-Finance | L4 | Rejected-Finance being higher bid |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
29 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Bareilly
HQ, CWE, MES, Station Road, Bareilly
CA NO.CWE BLY/GE (E) / 31 OF 2023- 2024 SPECIAL REPAIRS OF E/M ITEM OF STATION SWIMMING POOL AND ALLIED WORKS UNDER GE (EAST) BAREILLY
2023_MES_611564_1
8200/B/761/E8
Open Tender
Civil Works
Item Rate
180 days
Bareilly
As per NIT
6 documents required · 6 mandatory
₹500
GE ( E ) Bareilly
₹80,000
Yes
23 Oct 2023
1 Aug 2023
31 Aug 2023
1 Aug 2023
29 Aug 2023
16 Aug 2023
Amount
Lifting/taking out defective submersible pump and motor of 15HP capacity alongwith column pipe of any size and submersible cable, dismantling the pump from motor and deposited to E/M store yard both pump and motor complete all as specified and directed.
Supply and fixing borewell submersible pump motor set 15 HP vertical type electric driven 415 volts, TP, head 30 to 40 mtr , suitable for 80/100 mm bore complete all as specified and directed .
Supply and fixing of static change over 400 Amp, 415V ISI marked complete all as specified and directed.
M&L for isolation of power supply from the existing electric panel, taking out unserviceable centrifugal pump set of cap 25 HP by unscrewing of bolts of induction motor and pump casing from MS base frame and keeping aside , transportation of centrifugal pump to civil workshop, dismantling of UNSV centrifugal pump including cleaning of all parts, oiling/greasing including reassemblimg the same after repair , and back to site, fixing of repaired centrifugal pump set on its original foundation making proper alignment including restoration of power supply and testing, commissioning to the entire satisfation of GE complete all as specified and directed.(Note :- spare parts to be measured and paid seperatly)
Supply and fixing in replacement bearing sleeve suitable for 25 HP centrifugal pump setcomplete all as specified and directed.
M&L for pump shaft welding, turning, grinding and making key way complete all as specified and directed.
Supply and fixing TC coupling with suitable key complete suitable for25 HP centrifugal pump set complete all as specified and directed.
Supply and fixing CI impeller complete suitable for 25 HP centrifugal pump set complete all as specified and directed.
Supply and fixing in replacement of CI interstage ring complete suitable for 25 HP centrifugal pump set complete all as specified and directed.
Supply and fixing in replacement of gland packing complete suitable for 25 HP centrifugal pump set complete all as specified and directed.
Supply and fixing in replacement of wear ring complete suitable for 25 HP centrifugal pump set complete all as specified and directed.
Supply and fixing in replacement of bearing housing complete suitable for 25 HP centrifugal pump set all as specified.
Supply and fixing in replacement of fastener complete suitable for 25 HP centrifugal pump set all as specified.
Supply and fixing in replacement of air release valve complete suitable for 25 HP centrifugal pump set complete all as specified and directed.
Supply and fixing in replacement of eye bolt with nuts & washer complete suitable for 25 HP centrifugal pump set complete all as specified and directed.
Supply and fixing in replacement of ball bearing complete suitable for 25 HP centrifugal pump set complete all as specified and directed.
Supply and fixing in replacement of water liquid deflector complete suitable for 25 HP centrifugal pump set complete all as specified and directed.
Supply and fixing in replacement of motor & pump coupling safety guard complete suitable for 25 HP centrifugal pump setcomplete all as specified and directed.
Supply and Fixing of suction strainer for 25HP pump set of size 200mm all as specified and directed.
M&L for rewinding of 25 HP motor with new super enameled winding copper wire of existing size/gauge after cutting of burned winding including all insulating materials such as insulation varnish, PVC copper cable lead, glass fiber sleeves, cotton tape, insulation paper and heating in heat chamber at appropriate temperature and including all other part thurst plate, bush, impeller etc complete all as specified and directed.
Supply fixing testing and commissioning submersible cable flat 16 sqmm 3 core PVC insulated and PVC sheathed with multi stranded copper conductor 1100 volts grade fixed to submersible motor column pipe using suitable size of clamps made out of stainless steel flat of size 20x2 mm with steel nuts bolts & washer for every column pipe of 3 mtr lenghth complete all as specified and directed.
Supply and fixing pressure gauge of measuring capacity upto 100 kg/cm2, dia 100mm ISI marked all as specified and directed.
Removing choked media from Pressure Filter of size 2500x5700 and depositing same with in 30 mtrs. from plant room and cleaning of lateral pipes complete all as specified and directed.
Scrapping and cleaning of filter inside surfaces of Pressure Filter of size 2500X5700 & repainting inside with lead free Black bituminous paint and outside with two coats of synthetic enamel over a coat of redoxide complete all as specified and directed.
Supply & charging fresh filter media for 1010 Cuft. filtration tank as follows: (a) Natural graded Gravel of size 25mm- 20mm: 300 mm Layer : 25 cu ft b) Natural graded Gravel of size 15mm- 10mm: 200 mm Layer : 20 cu ft c) Natural graded Gravel of size 10mm-6mm : 200 mm Layer : 20 cu ft d) Coarse Quartz sand -8+14 mesh: 200 mm Layer : 20 cu ft e) Fine Quartz sand -16+30mesh : 1200 mm Layer : 140 cu ft complete all as specified and directed.
Repair and replacement of suction sweeper head of size 24''/36'', brush of size 24''/36'', PVC suction currugated hose pipe of size 2'' dia 50 mtr length, rope of suitable size as per requirment at site of 40 mte length and other all as specified and directed.
Supply , installation and testing of Chemical dosing system for Alum solution consisting of metering type dosing pump of capacity 27 LPH against 2.5 Kg/cm2 pressure with chemical preparation cum dosing tank of capacity100 Liters- one no. made out of FRP and agitator made of SS-316 and having suitable arrangement for mounting Dosing pump and agitator on the tank lid. Make of dosing system. complete all as specified and directed.
Supply install in repair and commissioning of Granular chlorination dosing pump of high pressure single head gear motored adjustable dosing pump having output of 2 U.S. GPD to 40 U S GPD and adjustable high pressure of up to 100 PSI (7 kg/cm2) or more , power input 230 V, 50 HZ self priming with nonmetalic with connecting nuts, ferrules and with all accessories including lead, tubing connection injection check valve complete all as specified and directed. Preparation tank (300 ltr) : (i) Water inlet line (ii) Outlet with strainer (iii) Drain (iv) Overflow (v) Conical bottom for sludge deposition (vi) Pot hole with over (vii) Level gauge (viii) Inspection port (ix) Agitator 120 watt 900 RPM single phase mounted with plastic shaft and impeller. Service Tank (100 ltr): (i) Water line inlet (ii) Dosing pump inlet arrangement (iii) Drain (iv) Overflow (v) Level gauge (vi) Inspection port
Supply , installation and testing of Chemical dosing system for Soda solution consisting of metering type dosing pump of capacity 14LPH against 2.5 Kg/cm2 pressure with chemical preparation cum dosing tank of capacity100 Liters- one no. made out of FRP and agitator made of SS-316 and having suitable arrangement for mounting Dosing pump and agitator on the tank lid. Make of dosing system complete all as specified and directed.
Supply , installation and testing of Chemical dosing system for copper sulphate solution consisting of metering type dosing pump of capacity 14LPH against 2.5 Kg/cm2 pressure with chemical preparation cum dosing tank of capacity100 Liters- one no. made out of FRP and agitator made of SS-316 and having suitable arrangement for mounting Dosing pump and agitator on the tank lid. Make of dosing system complete all as specified and directed.
Supply, testing of Ph testing kit all as specified and directed by Engr-in-Charge.
Supplying, installing, commissioning & testing sluice valve cast iron body, having steel spindle with iron wheel at top, class PN 1.6 with flanged ends, drilled suitably, complete with joints and including necessary bolts, nuts washers and rubber gaskets, conforming to BIS – 14846 complete for the following size complete. (a) 100 mm dia bore complete all as specified and directed.
All as per srl item No. 34 above, but 150 mm dia bore complete all as specified and directed.
Supplying, installing, commissioning & testing of cast iron body butterfly valves of size 200 mm per BIS 13095:1991 with fresh rubber gaskets , bolts and nuts all as specified and directed.
Supplying, installing, commissioning & testing of cast iron body butterfly valves of size 100 mm capacity per BIS 13095:1991 with fresh rubber gaskets , bolts and nuts all as specified and directed.
S&F of 100 mm bore PN 1.6 of cast iron material Non Return Valve all complete as specified and directed.
S&F of 150 mm bore PN 1.6 of cast iron material Non Return Valve all complete as specified and directed.
Supply and fixing of foot valve of outer dia 200 mm pipe ISI marked all as specified and directed.
Supply and fixing Medium Grade DI Elbow (ISI marked) of sizes 150 mm with flange end complete all as specified and directed.
Supply and fixing Medium Grade MS Elbow (ISI marked) of sizes 200 mm with flange end complete all as specified and directed.
Supply and fixing Medium Grade MS Elbow (ISI marked) of sizes 250 mm with flange end complete all as specified and directed.
Supply and fixing Medium Grade MS Socket Reducer (ISI marked) with flange end of size 250-100 mm complete all as specified and directed.
Supply and fixing Medium Grade MS Tee (ISI marked) with flange end of sizes 250 mm complete all as specified and directed.
Supply and fixing End Plate of 250 mm bore of MS material with rubber gasket flange end with nut bolts etc complete all as specified and directed.
Supply and fixing Gun metal gate valve of 15 mm sizes all as specified and directed.
M&L, Construction of Brick Masonry valve pit chamber of size 1200x1200x1200mm (Internal dimensions) with PCC 1:4:8 foundation 150mm thick, brick work built in CM 1:6, PCC 1:3:6 coping 50mm thick, plastering 15mm thick in CM 1:6 to all internal and exposed surfaces including excavation earthwork in hard/dense soil, MS sheet cover 4mm thick with locking arrangement embedded in PCC and painting to MS cover with two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m depth for laying of pipe/foundation etc or for shaft well cess pits manholes pier holes etc and not exceeding 1.5 m in depth and n.exc 10 sq m on plan and getting out in soft/loose soil complete all as specified & directed.
Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified & directed
Removing excavated materials (soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified & directed
S&F in replacement MS ERW column pipe of 10 fit each screwed 100 mm nominal bore having wall thickness not less than 7.11 mm electric resistance welded with MS flanged 16 mm thick heavy duty confirming to IS 6392 incl 2 mm thick rubber sheet and steel nuts and bolts 10 mm long with washer. etc complete as specified and directed
Supply and laying of 100 mm bore centrifugally cast ductile iron pressure pipe with spigot & socket end, class K-9 in any length laid in trenches, conforming to IS-8329/2000 with cement mortar lining with and including rubber gasket jointing with tyton joint conforming to IS-15382 and all fittings complete all as specified and directed.
Supply and laying of 250 mm bore centrifugally mild steel pressure pipe of thickness 5.40 mm with flange end including nut and bolts of suitable size in any length laid in trenches confirming to IS 1239/2004, complete all as specified and directed.
Supply and laying of 200 mm bore centrifugally mild steel pressure pipe of thickness 5.40 mm with flange end including nut and bolts of suitable size in any length laid in trenches confirming to IS 1239/2004, complete all as specified and directed.
Supply and fixing mild steel tale piece of dia 200 mm of thickness 5.40 mm with flange end inclding complete accessories i.e. nut and bolts etc all as specified and directed.
Supply and fixing of display board of outer size 4.1X1.0 mtr made out of stainless steel of thickness 2 mm at square pipe 8X8 cm with back support of 40X5 mm stainless steel plate fitted at 3 fet interval of board backside including writing name of installation and unit as directed with reflecting tape of any colour as directed alongwith legs of size 8X8 cm square pipe upto the height of 14 feet from ground with foundation with stand 26 km/hr air velocity alongwith 02 nos of spot light at suitable place as directed with point wiring as directed. Note : Tenderers may note that amount of credit Rs 2,27,500.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.
VIJAY ENTERPRISES
SONI ENTERPRISES
HASINI ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .