REPAIR/MAINT TO CHEQUERED TILE, PCC PATH DRAIN /SEWAGE LINE, JOINERIES, ROOF TREATMENT, PERIODICALS, KITCHEN CABINET/MODULAR KITCHEN, DOORS, WINDOW AND OTHER MISC B/R WORK AT TECHNICAL RESIDENTIAL AREA OF DEAL UNDER GE (I) RND DEHRADUN

Amount

Demolition of brick or stone boulders masonary built in cement mortar or cement lime mortar including all quions, arches pillars etc but excluing ashlar facings ressed stone works and precast concrete artiles and removal of demolished materials to a distance exceeding 500 M but not exceeding 1000mtr, complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curves on plan exc 6 mtr mean radius using old size bricks built in Cement Mortar (1:4), complete all as specified and directed.

Demolition of plain cement concrete (Un reinforced ) PCC paver block of any description in any position not otherwise specifically provied and removal and removal of demolished materials to a distance exceeding 500 M but not exceeding 1000mtr, complete all as specified and directed.

M&L Plain cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregate as in foundation filling & Mass concrete , sub base.complete all as specified and directed.

Material and labour for 50mm thk PCC 1:2:4 type B-1 using 20mm graded stone agg as in flooring finished even and smooth without using extra cementcomplete all as specified and directed.

M&L75mm thick PCC 1:3:6, type C2, using 40mm graded stone aggregates as in Plinth protection, platform and floor surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in surface channel and drain incluing necessary form work complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in lintels upto 1.5 clear span , cills steps seismic and other similar bands, copings, hold fast and the like incluing weathering , slightly rounded or chamfered angles and throating asdirected with and icluding necessary form work in CM 1:4 complete all as specified and directed.

M&L for providing and fixing in position 12mm thick bitumen impregnated fiber board conforming to IS: 1838, including cost of primer, sealing compound Grade-A in expansion joints of depth 10mm complete all as specified and directed.

Providing and laying factory made chamfered edge 80mm thick cement concrete paver blocks of approved colour and design, M-40 grade in footpath or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed.

M&L for glossy finish rubber moulded chequered cement concrete tile 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment to match over and including 20mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finished complete all as specified and directed.

Taking down existing cement or cement lime plaster/Grit wash of any description and in any position on brick or concrete surfaces etc including racking out joints, hacking for key scrubbing down with water etc complete all as specifed and directed.

M&L for Rendering 15mm thick in CM (1:4) on fair faces of brick masonry/ concrete surface on wall with using liquid water proofing compound and finishing the surfaces even and smooth without using extra cement , complete all as specified an directed. Note:- WPC shall be measured & paid for separately as “Supply only item under respective items of Sch "A"/BOQ.

Supply only liquid water proofing compound ISI marked complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over and including 3 mm thick water proof wall care puty in two coat or layers including preparation of newplastered external surfaces of wall complete all as specified and directed.

M&L for reinforced Precast cement concrete(1:2:4) type B-1 using 20 mm graded stone aggregate as in landing , cover slab (for manholes, shelves), chullah hoos, chajjas, water troughs , mangers, shelves an similar articles with plain faces incluing necessary form work , & set in Cement Mortar (1:4) including demolition of old RCC covers of any descriptionand removal of demolished materials to a distance exceeding 500 M but not exceeding 1000mtr, complete all as specified and directed. Note:-Reinforcement shall be measured and paid for separately in respective items

M&L for Mild Steel TMT bar, 8 mm dia & Over , cut to length, bent to shape require, including cranking , bending spirally for hooping for columns ,hooking ends and binding with Mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise described and removal of dismantling materials to a distance exceeding 500 M but not exceeding 1000mtr, complete all as specified and directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work and similar works conforming to Fe-290 Gd E-165 complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. Complete all as specified and directed

M&L for Preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition and breaking up Drain pipes (SGSW, AC or reinforced concrete) 150mm bore to 200mm bore set in cement mortar and removing of debrish to a distance exceeding 500 M but not exceeding 1000mtr, complete all as specified and directed.

M&L 150mm internal dia of pipe salt glazed stoneware drain pipe Grade 'A' laid in trenches and jointed in cement & sand morater 1:1 and testing complete all as specified and directed.

All as per item no 24 above but for 200mm internal dia of pipe complete all as specified and directed.

M&L Concrete bed 150mm dia to drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8) type D-2 complete all as specified and directed.

All as per item No 24 above but for 200mm dia of pipe complete all as specified and directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m depth in soft/ loose soil for foundation, etc. or for shafts, wells cesspits, manholes, pier holes etc and getting out complete all as specified and directed.

M&L for returing filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.

Removing of excavated material (Soil) to a distance exc 250m but not exceeding 500 mtr and depositing at a level n.exc 1.5 m above the starting points complete all as specified and directed.

S&F in repair 110mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 110 mm dia PVC(SWR) bends/ shoes any radius complete all as specified and directed.

S & F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S & F in repair PVC (SWR) floor trap 75 mm, plain with grating incl setting and jointing with solvent cement complete all as specified and directed.

S&F in repair 75 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 75 mm dia PVC(SWR) bends/ shoes any radius complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc., capacity of tank exc 250 & n exc 500 litres including writing date of cleaning on the tank with suitable synthetic enamel paint etc complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc., capacity of tank exc 500 & n exc 1000 litres including writing date of cleaning on the tank with suitable synthetic enamel paint etc complete all as specified and directed.

M&L for Cleaning of septic tank up to 25 users by removing sludge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc1.5 km but n exc 2 KM out of MOD land and buried into ground by digging pits spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed.

M&L for Cleaning of septic tank exc 25 users and not exc 50 users by removing sludge in semi solid sate or liquid state by manually or by pressure pump including removal of sludge to a distance exc1.5 km but n exc 2 KM out of MOD land and buried into ground by digging pits spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed.

M&L for Cleaning of septic tank exc 50 users and n.exc 100 users by removing sluge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc 1.5 KM but n. exc 2 KM out of MOD land and buried into ground by digging pits spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed.

M&L for Cleaning of septic tank exc 100 users and n.exc 200 users by removing sluge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc 1.5 KM but n. exc 2 KM out of MOD land and buried into ground by digging pits spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed.

M&L for Cleaning of septic tank exc 200 users and n.exc 300 users by removing sluge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc 1.5 KM but n. exc 2 KM out of MOD land and buried into ground by digging pits spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed.

M&L for Dewatering of soak well or sewage of any dia and depth manully or by using pumps and rremoval of sludge if any to a distance exc1.5km but not exc 2Km out of MOD land and buried into ground by digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed.

M&L for cleaning with suitable chemical of P/S trap of EWC/IWC etc by removing all blockage of any description in any situation in the system and removal of sludge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc1.5km but nexc 2KM out ofMOD land and buried into ground by digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed.

M&L for cleaning of Nahani/floor trap of Bath/kitchen/urinal/ wash basin incluing Ist gully trap etc by removing all blockage of any description in any situation in the system and removal of sludge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc1.5km but nexc 2KM out of MOD land and buried into ground by digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed.

M&L for cleaning of Sewage pipe line from gully trap to ISt manhole an then upto the final drop into the septic tank an soak well /cess pool (except intermediate manholes ) by removing all blockage of any description in any situation in the system complete any ia of pipe an epth by rodding ,manually or by pressure pump including removal of sludge to a distance exc1.5km but nexc 2KM out of MOD land and buried into ground by digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed.

M&L for cleaning of manholes any type-size and any depth by removing of sludge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc1.5km but nexc 2KM out ofMOD land and buried into ground by digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed.

Providing and fixing Ist quality ceramic glazed wall tiles of size size 300 x 450 / 350x450 / 350x250 conforming to IS: 15622 of approved make, in all colours, shades except burgundy, bottle green, black in skirting, risers of steps and dados,over and including 10 mm thick rendering in cement mortar (1:3), rough finish to receive the tiles and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete all as specified and directed.

M&L for non skid Ceramic tiles,first quality( of approved class , colour and design/ shade) square/ rectangular) area of tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over and including 15 mm thick Screed bed in Cement mortar 1: 6, with and including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with and including plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and 15mm dia chromium plated brass washing jet fixed to water closet with 15mm dia and 1.2m to 1.5m long flexible pipe with chromium plated spring type cover complete with fixing arrangement fancy look complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) & including CI trap & connecting fitting as required set in plain cement concrete (1:3:6) type C-1 and connecting to flusing cistern and trap & connecting fittings as required and making good to floor, complete all as specified and directed.

S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed.

S&F in repair Vitreous China urinals, half stall type white urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

Applying epoxy treatment for bonding new or old concrete surfaces by applying chemical FOSROC and NITOBOND AR complete all as specified and directed.

Polythene film, 150 micron thick, laid ona coat of bitumen primer, @ 0.30 to 0.50 kg per sqm complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:3 finished even and smooth (without using extra cement) complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for 6 mm thick cement plaster in 1:3 cement mortar, on concrete ceiling surface finished even and smooth without using extra cement, complete all as specified and directed.

Taking down of existing roof treatment with plastering and cleaning the surface with wire brushes and washing and drying the top surface for execution of work and removal of demolished materials to a distance exceeding 500 M but not exceeding 1000mtr, complete all as specified and directed. complete all as specified and directed.

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane complete all as specified and directed.

M&L for preparing of new plastered surface on wall and applying two coats of Oil bond distemper over a coat of alkali resitance primer over 3 mm thick wall care putty in two layer on plastered surface complete all as specified and directed.

M&L for preparing old surfaces of walls plastered or un-plastered by brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and stopping of distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of distemper oil emulsion on old prepared surfaces of walls complete all as specified and directed.

M&L for preparation of surfaces of any descriptionand applying two or more coats of aluminium paint of approved brand and manufacture to give an even shade over roof treatment all as specified and directed.

M&L for preparation of old painted surface wall / ceiling by brooming down loose partical, removing of smoke soot, moulds and unwanted vegetation from wall, facia, parapet etc applying one coat of cement base paint complete all as specified and directed.

M&L for complete removel of existing plastered or unplastered surfaces on walls and applying of Birla/JK white wall putty approx 1 mm thick as per manufacturer's instruction on newly prepared surface and make the surface smooth by rubbing with sand papers etc and applying Two coat of weather proof exterior paint silicon based over a coat of primer complete all as specified and directed.

Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Providing and fixing factory made uPVC white colour Sliding window area not exc. 2.0 Sqm, Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm complete all as specified and directed.

S&F in repair Chromium plated brass central hole Basin Mixer without Popup Waste system complete screwed down for 15 mm bore GI pipe complete all as specified and directed. Make as approved by GE.

S&F in repair Chromium plated brass wall mixer 3-in-1 system fancy type with provision for both hand shower and overhead shower complete with wall Flange (without Hand & over head Shower) screwed down for 15 mm bore GI pipe complete all as specified and directed. Make as approved by GE.

S&F in repair 15mm bore stop valve, cast copper alloy screwed down high pressure with crutch or butterfly handle chromium plated fancy type long shank and cup(concealed type), screwed both ends for iron pipe or for unions complete all as specified and directed.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter complete all as specified and directed.

Providing and fixing P.V.C. low level flusingh cistern 10 Ltr capacity (white) with manually controlled device (Handle lever) conforming to IS:7231, with all fittings and fixtures complete all as specified and directed.

S&F 600 mm long 20mm dia brass chromium plated tubular towel rails, complete all as specified and directed.

S & F in repairs 15 mm dia angle cock (two way) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe for fixing of health faucet and PVC connections etc. complete all as specified and directed.

Providing and fixing 15mm C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms complete all as specified and directed.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and directed.

Providing and fixing sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing as per sample approval complete all as specified and directed.

S&F in repair drapery fancy type curtain rod shall be 32 mm dia of aluminium pipe with powder coating with wooden finish including bracket rings,fancy knob , curtain ring 08 Nos minimum including all fixing arrangement complete all as specified and directed. Make as approved by GE.

S&F in repair sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with & including one waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement ,with PVC coupling, PVC waste pipe 40mm bore 750mm long complete all as specified and directed. Make as approved by GE.

S&F in repairs Stainless steel utencil plate rack size 600 mm x 600 mm x 250 mm ) using 0.8 mm thick sheet complete all as specified and directed.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete all as specified and directed.

Providing and laying Polished Granite stone slab colour of Black, cherry/rubby Red or equivelent flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. complete all as specified and directed.

Dismantling wooden boardings 10mm to 25mm thickness in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead complete all as specified and directed.

S&F solid PVC door frame of size 50mmx 47mm made out of 5 mm plain/ colour PVC sheet reinforced with MS square tube as per specification & drawings specified in SSR Part-II 2010 complete all as specified and directed.

S& F Factory Made Solid PVC coulour Moulded Door Shutter with wood free EPS, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing Note: Colour approved by GE.

S&F for 125 x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs,hinges,lock strike plate etc, complete all as specified & directed.

M&L for 35 mm thick flush shutters, solid core construction, exterior grade with block board core and plywood face, pannels, commercial type on both sides and one face is covered withdecorative face veneer with lipping / frame to match, including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

S&F factory made glazed and Skelton 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded,mitred and rebated sash bars, any numbers , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR Part-I section 8, clause 8-24 (a) complete all as specified and directed.

S&F Butt hinges, medium weight coldrolled mild steel and fixed 75mm size. complete all as specified and directed.

S&F Butt hinges, medium weight coldrolled mild steel and fixed 100mm size. complete all as specified and directed.

Supply & Fixing in repairs 125 mm size Aluminium handles, cast type, anodised complete all as specified and directed.

Supply & Fixing 150 mm size Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 300 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed.

S&F for 3 mm thick,Sheet glass,ordinary quality and glazing with beading (any type) or oil putty in square exc 0.5 sq. m in each pane, etc complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with beading (any type) or oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F 18mm to 20mm thick solid factory made PVC board for cup board /cabinate shutter with one side 1mm thick printed pvc sheet other side plain pvc sheet suitable fixed with &including suitable pvc frame, matching colured beading to cover all edges & screwed portion of frame, Magnetic catcher as per specification & drawing complete all as specified & directed.

S&F Auto closing hinges 35mm of 0 crank for kitchen cabinet shutter fixtures and all as specified and directed.

S&F Auto closing hinges 35mm of 8 crank for kitchen cabinet shutter fixtures and all as specified and directed.

S&F Auto closing hinges 35mm of 120 crank for kitchen cabinet shutter fixtures and all as specified and directed.

S&F Ball bearing runners 500mm Telescopic full load extension load capacity of 50 kgs fixed on basket and cabinet walls and all as specified and directed.

S&F Stainless steel handles 150mm size for kitchen cabinet shutters and all as specified and directed.

S&F Chromium plated stailess steel wire basket (storage basket ) pull out type, size 940x580x580mm of grade 304 with necessary fixing clips etcand all as specified and directed.

S&F Chromium plated stailess steel wire basket (cutlery basket ) pull out type , size 480x500x100mm of grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F Chromium plated stailess steel wire Bottle pull out basket (storage basket ) pull out type , size 100x150x750mm of grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F Chromium plated stailess steel wire Thali basket (storage basket ) pull out type , size 480x150x200mm of grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F Chromium plated stailess steel wire saucer basket (storage basket ) pull out type , size 480x500x150mm of grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

Providing and fixing CP brass toilet paper holder complete all as specified and directed.

M&L for preparation of new wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint in any tint over a coat of wood primer on new surfaces all asspecified and directed

M&L for prepration of old surface of wood or wood based materials of any descriptions applying one coats of synthetic enamel paint over 10cm width or girth etc all as specified and as directed.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc, including taking up or down existing GI tubing and connections, and making good the disturbed surface, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc, including taking up or down existing GI tubing and connections, and making good the disturbed surface, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Supply, fixing, laying & testing 25mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc, including taking up or down existing GI tubing and connections,including taking up or down existing GI tubing and connections, and making good the disturbed surface, fixed to walls and ceilings or laid in floors complete all as specified and directed.

fixing and laying only 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all New GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc, including taking up or down existing GI tubing and connections, and making good the disturbed surface, fixed to walls and ceilings or laid in floors complete all as specified and directed.

fixing and laying only 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all New GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc, including taking up or down existing GI tubing and connections, and making good the disturbed surface, fixed to walls and ceilings or laid in floors complete all as specified and directed.

fixing and laying only 25 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all New GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc, including taking up or down existing GI tubing and connections, and making good the disturbed surface, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Disconnecting & taking down existing water tank of capacity exc 250 liter and not exc. 500 liter and removing from site complte and S&F rotational moulded polyethylene water storage tanks 500 lts capacity (cylindrical vertical with closed top) hoisted with and including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part I complete all as specified & directed.

Providing and fixing 25mm gun metal gate valve with C.I. wheel of approved quality (screwed end) complete all as specified and directed.

Providing and fixing 20mm gun metal gate valve with C.I. wheel of approved quality (screwed end) complete all as specified and directed.

Providing and fixing15 mm C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

S&F in repair soap dish, Stainless steel of approved pattern complete all as specified and directed.

M/S DHYANI CONSTRUCTION CO.

SHREYA INFRA DEVELOPER & CONSTRUCTION COMPANY

JS CONSTRUCTION COMPANY

ANEJA AND COMPANY