Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.5 LAccepted-Finance MAYOORASASI COMPLEX TC 6 2034 2 SHOP NO 09 THURUVIKAL PO AKULAM TRIVANDRUM 695011 | TRIVANDRUM | THIRUVANANTHAPURAM | KERALA | 695011 | L1 | Accepted-Finance Admitted Found Reasonable for Acceptance | |
| 2 | L2₹13.1 L+₹61,073 (4.87%)Accepted-Finance | L2 | Accepted-Finance Rejected L1 being accepted | |
| 3 | L3₹13.2 L+₹71,214.25 (5.68%)Accepted-Finance HOUSE NO 105 PANTHEERMA VILLAI NEAR NELLIKKAVILLAI CSI CHURCH VELLAYAMBALAM VENCODE P O KANYAKUMARI DIST TAMIL NADU 629 171 | VENCODE | KANYAKUMARI | TAMIL NADU | 629171 | L3 | Accepted-Finance Rejected L1 being accepted |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
22 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Army Trivandrum
Office of Garrison Engineer Army, Thirumala Post, Trivandrum-06
As per tender documents
2022_MES_559727_1
GE (ARMY) TVM 9490/E8
Open Tender
Civil Works
Item Rate
180 days
GE Army Trivandrum
As per NIT
8 documents required · 8 mandatory
₹500
GE Army Trivandrum
₹30,000
Yes
10 Dec 2022
25 Oct 2022
29 Nov 2022
26 Oct 2022
22 Nov 2022
8 Nov 2022
Amount
Taking down of cement plaster incl hacking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick in two coats (10mm +5mm) in cement plaster on fair faces of brick work/concrete in cement mortar 1:4, finished even and smooth with outusing extra cement including mixed with integral water proofing compound @ 3% by wt of cement on finishing coat etc complete all as specified and directed. Note: Cost of integral water proofing compound will be measured and paid separately
M&L for Applying two coats of acrylic exterior emulsion water proofing paint over a coat of primer including prepartion of new surfaces of wall (up to four storey bldg) as per manufactures instructions ) etc complete all as specified and directed.
M & L for rendering 10 mm thick on ceiling/facia with cement mortor (1:3), finished even and smooth without using extra cement all as specified and directed.
M&L for two coats of oil bound distember over a coat of primer including prepartion of new plastered surfaces of Ceiling over 10 cm width or girth etc complete all as specified and directed.
Supply only integral water proofing compound
Roughening of surfaces of old concrete surfaces , sweeping clean and washing down with water to remove dust etc and brushing with neat cement slurry at 3 kg of cement per sq metre etc complete all as specified and directed.
M&Lfor rendering in CM 1:3, 10 mm thick mixed with water proofing compound @ 3% by weight of cement, finished even and smooth without using extra cement etc complete all as specified and directed. Note : cost of Water proofing compound will be measured and paid seperately.
M&L for APP modified water proofing membrane thickness not lessthan 4mm and weighing not less than 4.50 Kg/ Sqm reinforced with non-woven polyster, matt black finished ( wt not less than 150 gms / sqm), laying by torch application including minimum 100mm overlap over compatible primer @ 0.40Lit/sqm and finishing with solar refelective Bituminous aluminum paint 100 gms /sqm including dismantling and removal of exisiting unserviceable membrane etc complete all as specified.
Demolition of cement concrete (unreinforcement) as in roofs,floor (other then ground floors),beams,staircase,landings,chajjas and similar suspended work etc complete all as specified and directed.
M&L for PCC 1:2:4 type B0 with 12.5mm graded stone aggregate 25mm thick over RCC roof etc complete all as specified and directed.
Dismantling of wall and ceiling boards or insulation boards any thickness including cover fillets etc complete all as specified and directed.
S&F Non Asbestos decorative type fibre cement building boards , 4 mm thick fixed or laid / inserted to timber / GI / Aluminum frame work with screws on ceiling etc complete all as specified and directed.
M&L for Anodised aluminum snap grid frame work for false ceiling size of grid 605 x 605 mm etc complete all as specified and directed.
S&F Plain mild steel wire 2.5 mm dia galvanised class 3 in detached work such as for mosquto nets and fixing to straining bolts, hook, eye etc complete all as specified and directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each, and removing from site, complete all as specified and directed .
S& F Factory made solid panelled PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ' C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, complete all as specified and directed .
S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supply & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed
S&F Aluminium anodised, Butt hinges 100mm long etc complete all as specified and directed.
S&F Aluminium handles, cast type, anodised of size 125 mm long,etc complete all as specified and directed.
S&F Aluminium, anodised, barrel tower bolts of extruded section, 150 mm long, etc complete all as specified and directed.
Demolition of Brick work or stone/boulder masonarybuilt in cement mortor including all quoins, arches, pillars etc complete all as specified and directed.
M&L for Pre-Cast Cement Concrete block masonry type C1, 1:3:6 (using 20mm graded stone aggregate) with solid blocks exc 10 cm in width and setting in CM 1:4 etc complete all as specified and directed.
S&F in repairs floor door stopper of aluminium alloy body and tongue with hard drawn steel springoverlap length of cover plate 140 mm long etc complete all as specified and directed..
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.
M&L for screed bed or bedding layer of mortar 15 mm thick in cement motar 1:6 for laying floor finishes all as specified and as directed.etc complete all as specified and directed.
M&L for Vitrified ceramic coloured tiles 10mm thick (square / Rectangular ) area of each tiles exceeding 0.18 Sqm but not exceedng 0.38 sqm, as in floors etc, set and jointed neat cement slurry and pointed with colour cement to match etc complete all as specified and directed.
All as per item No 27 here-in-before but as in skirtings.
M&L for Non skid ceramic tiles 7 to 8 mm thick (square / Rectangular ) area of each tiles exceeding 0.11 Sqm but not exceedng 0.18 sqm, as in floors etc, set and jointed neat cement slurry and pointed with colour cement to match etc complete all as specified and directed.
M&L for 10 mm thick rendering in cement mortar 1:4 on fair faces of concrete surfaces as screed for tiles (Upto four storey building) etc complete all as specified and directed.
M&L for glazed ceremic coloured tiles of size 450x300x7mm thick as in skirting/dados set and jointed in neat cement slurry and pointed with coloured cement to match, non skid joint free tiles etc complete all as specified and directed.
Demolition of cement concrete (unreinforcement) as in ground floors or paving n. exc 15cm thick below or above ground level etc complete all as specified and directed.
M&L for 75mm thick cement concrete 1:3:6 type C2 (40 mm graded stone agg) as in sub base of floor etc complete all as specified and directed.
M&L for Chequered cement concrete tiles 400x400x20-25mm thick coloured set jointed and pointed in neat cement slurry in floors with grey cement and pigment etc complete all as specified and directed.
S&F in repairs Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples, etc complete all as specified and directed.
Taking down chowkats or frames exc. 1.5 Sqm but not exc. 4 Sqm each (without taking off shutters from the frame) etc complete all as specified and directed.
S&F Aluminum door/windows using power coated aluminum section, including necessary joining cleats,glazing clips, rubber neoprene packing, handles aluminum snap beading screws etc powder coating of any colour (thickness of powder coating minimum 50 micron ) etc complete all as specified and directed.
S&F Door closer aluminium extruded section body, hydralulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm width and weight between 61 to 80 Kg and fixed using aluminium extruded section all as specified and directed.
S&F Brass Mortice lock of 4 Levers, vertical type, of size 100mm etc complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor (Overall length of cover plate 150mm) etc complete all as specified and directed.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty etc complete all as specified and directed.
S&F 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to fimber frame work etc complete all as specified and directed.
M&L Sheet glass ordinary quality and glazing with rubber neoprene packing in square exc 0.5 sqm in each pane 5.5 mm thick glass etc complete all as specified and directed.
Demolition of stone slabs/ tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and remove the rubbish off the premises etc complete all as specified and directed.
M&L for 19-20 mm thick granite slab in any size in black colour, machine cut, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone slab including cutting and polishing with 15 mm thick screed bed in cm 1:4 etc complete all as specified and directed.
M&L for Sand filling /cushioning under floors or in foundations including watering and consolidation etc complete all as specified and directed.
M&L for machine pressed precast concrete interlocking coloured paver block any shape and size confirming to IS 15658-2006 of 55 to 60 mm thickness ,M-35 Grade with grey cement and pigment etc complete all as specified and directed.
M&L for providing precast cement concrete in (kerb stone) 1:2:4 type B1 using 20mm graded aggreagate and set in cement motor 1:6 etc complete all as specified and directed.
S & F in repair for Aliuminium alloy anodised ,sliding door bolt 300 mm long with haps staples (bolt type) and fixing clip of sheet , cast or extruded section and fixing bolt and sliding bolt of extruded sections or cast alluminium alloy etc complete all as specified and directed.
S & F in repair for Aluminum anodised, barrel tower bolts of extruded section , 200mm long etc complete all as specified and directed.
S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm dia and fixed with steel staple or wooden bead etc complete all as specified and directed.
S&F in repair worn out wooden pelmet boxes or cup board shutter of 18/19 mm thick block boards, grade 2 quality interior grade, commercial type fixed with MS clips,screws and 2nd class hardwood plugs 30x30x40mm embedded in wall with cement mortar (1:3) etc complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as specified and directed.
M&L sheet glass ordinary quality 3 mm thick and glazing with oil putty or wooden beads n.exc 0.50 sqm in each pane. etc complete all as specified and directed.
S&F figured glass pin headed type 3 mm thick and glazing with oil putty n.exc 0.50 sqm in each pane etc complete all as specified and directed.
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors or fixed to walls including bend/branch pipe/clips whereever required and necessary scaffolding inclding taking down existing pipe and demoliton of PCC/brick work and making good to match with existing surface all as specified (upto four storey building) etc complete all as specified and directed.
All as per item No 56 here-in- before , but 75mm dia.
S&F mild steel Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays suitable for pipe 110mm/ 100mm bore dia, including bolts and nuts and securing ends of stays to wall or roof etc complete all as specified and directed.
All as per item No 58 here-in-before, but suitable for pipe 75mm dia bore
Dismantling of plain steel/aluminium sheeting of any gauge, thickness including Nainital or similar pattern roof covering etc complete all as specified and directed.
S&F plain, aluminium sheeting, alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and grith as fixed) 0.56 mm thick etc complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws and J hooks as specified.etc complete all as specified and directed.
S & F in repair stainless steel 4 lever Mortice lock,vertical type, size 100 mm etc complete all as specified and directed.
S&Fin repair Continuous (Piano) hinges, mild steel bright finished or electrogalvanised, width of flaps( when open) 40 mm etc complete all as specified and directed.
S&F Ball catches with 8mm dia steel ball, catches with 8mm dia steel ball and brass body and striking plate including in and fixed etc complete all as specified and directed.
SHILPA ENGINEERS AND CONTRACTORS
DJ GROUP
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .