Annual Plan-Changaroth GP Pro.no 248/25-26 Erection of MINI MCF at various wards-. General Civil Work

mini MCF

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD462040/2025-2026:Providing and fixing precoated galvanised iron profile sheets(size,shape,pitch of corrugation as approved by Engineer in charge .35mm (+0.05%)total coated thickness with zinc coating 120gms per sqm as per IS-277 in 240mpa steel grade 5-7 micron epoxy primer on both side of the sheet and polyester top coat 15-18micron .Sheet should have protective guard film of 25 micron mimimum to avoid scratches during transportation and should be supplied in single length 12m or bas desired by engineer in charge.The sheet shall be fixed using self drilling /self tapping screw of size (5.5*55mm)with EPDM seat complete upto any pitch in horizontal/verticalor curved surface ,excluding the cost of purlin ,rfater and trusses and including cutting to size and shape wherever required.

12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)

OD462050/2025-2026:supplying and fixing square uPVC gutter 160mm size with MS flat 25*5mm size @60 cm c/c fixing on roof member (purlin or rafter ),bolts nuts and washer etc including making necessary connection with rain water pipe complete.

9.55.4:Providing and fixing ISI marked IS : 1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete :50x37x1.50 mm

50.9.15.1:Supplying and fixing 200 mm Aluminium aldrop

13.71:Lettering with black Japan pint of approved brand and manufacture