SPECIAL REPAIR FOR REPAIR REPLACEMENT OF ELECTRIC UG CABLE CONDUCTOR AND MISC WORK AND CERTAIN SANCTIONED WORK AT

Amount

Excavation in trenches not exceeding 1.5 m wide and not exeeding 1.5 m in depth and getting out in soft/loose soil for removing/laying of cable etc as directed.

Returning, filling excavated soil in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each all as directed.

Removal of excavated material to be distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified and directed.

Dismantling of ACSR or AAC conductors of any type ,any size

Dismantling insulators any type, any size

Dismantling cross-arms of M.S. channel or angle sections etc. complete and setting aside for re-use with in 50m complete all as specified and directed.

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core complete all as specified and directed.

All as per the description of serial item No. 7 here -in-before but for of size 95 Sqmm 3.5 core, complete all as specified and directed.

All as per the description of serial item No. 7 here -in-before but for of size 70 Sqmm 3.5 core, complete all as specified and directed.

All as per the description of serial item No. 7 here -in-before but for of size 50 Sqmm 3.5 core, complete all as specified and directed.

All as per the description of serial item No. 7 here -in-before but for of size 35 Sqmm 3.5 core, complete all as specified and directed.

All as per the description of serial item No. 7 here -in-before but for of size 25 Sqmm 3.5 core, complete all as specified and directed.

All as per the description of serial item No. 7 here -in-before but for of size 16 Sqmm 4 core, complete all as specified and directed.

All as per the description of serial item No. 7 here -in-before but for of size 16 Sqmm 2 core, complete all as specified and directed.

All as per the description of serial item No. 7 here -in-before but for of size 10 Sqmm 2 core, complete all as specified and directed.

Sand cushioning to under ground cable with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable (10 cm punned thickness above the top of the upper most cable, total 18 cm), complete all as specified and directed.

Sub class “B” brick, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to length of the brick complete all as specified and directed.

M&L galvanised iron tubing light grade of size 40mm bore including accessories such as socket and level for protection of underground cable on poles/walls/under road crossing etc complete all as specified.

All as per the description of serial item No. 18 here -in-before but for of size 50mm bore, complete all as specified and directed.

All as per the description of serial item No. 18 here -in-before but for of size 80mm bore, complete all as specified and directed.

Earthing with galvanized steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit less than 2.25 mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr deep below normal ground level, connected to 4mm dia galvanized iron wire as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel complete with 15mm dia light grade protection pipe, 20mm dia GI light grade watering pipe with funnel including char coal dust, salt, PCC 1:2:4 in pit with precast RCC M-15 cover reinforced with XPM not less then 4.00 Kg per sqm including necessary earth work in any type of soil, removal of surplus soil to a distance not exc 50m, returning filling in complete as shown in electrical plate No 3 of SSR Part-I (2009), and connected to earthing test point all as specified or indicated, including testing on completion. NOTE: The rates for earthing includes the cost of earth lead and protection pipe upto 7.50m length.

Supply and fix street light box of PVC make sintex consisting of 01 No MCB 10 Amps, 10 KA capacity (3 phase and neutral) including aluminium strip bus bar for incoming and outgoing cable with necessary connection duly fixed on the pole with suitable size of MS clamp as approved and directed.

Supply and fix XLPE armoured aluminium conductor cable 4 Sqmm two core on poles or passing through steel or PVC conduit pipe 1100 volts grade with suitable cable lugs, clamps, nut bolts etc complete all as specified and directed.

S&F MCCB 400 Amps four pole, (36 KA) suitble for 415 Volts, 3 phase 4 pole thermal magnetic release adjustable type, to be fixed in existing LT Panel and connecting with suitable size terminal contact with stranded PVC insulated copper cable with copper lugs complete all as specified and directed.

All as per the description of serial item No. 24 here -in-before but for of size 250 Amps four pole (36 KA) , complete all as specified and directed.

All as per the description of serial item No. 24 here -in-before but for of size 160 Amps four pole (36 KA), complete all as specified and directed.

All as per the description of serial item No. 24 here -in-before but for of size 125 Amps four pole (16 KA), complete all as specified and directed.

All as per the description of serial item No. 24 here -in-before but for of size 100 Amps four pole (16 KA), complete all as specified and directed.

Supply, install, testing & commissioning of CPRI approval LT panel board, outdoor type, floor mounted, factory made suitable for 415 volt, 3 PH, 4 wire , 50 HZ , AC supply system having busbars chamber made out of size 60 cm x 60 cm x 30 cm with angle iron of size 40 x 40 x 5mm with copper bus bars duly insulated by insulation of RYB colour 300 Amps rating mounted on porcelain insulators. The panels shall be factory made, double door, made out of 3.15 mm thick MS Sheet (CRCA) totally enclosed dust, vermin & rust proof front operated, front & rear opening with locking arrangement fixed with MS angle iron frame of sie 40X40X6mm and duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable etc all as directed at site and comprising of the following:- (A) IN COMMING (a) MCCB 200A, 4P, 415 Volts AC supply , thermal magnetic release type 35/36 KA-01 No (b) Panel mounted multi function meter for measuring Voltage (0-500 Volts), Current (0-500 Amps) and frequency-01 No (c) RYB neon indicating lamp panel mounting type (Set of three ) - 01 N0. (B) OUT GOING (a) MCCB 160A, 4P, 415 Volt 25KA thermal magnetic relase type -01 Nos. (b) MCCB 63A, 3P, 415 Volt 16 KA thermal magnetic relase type -02 Nos. (c) MCB SPN 40A , 415 Volts 10 KA - 02 No (d) Spare way for accommodating MCCB three pole 63 A 10 KA - 01 No

All as per description item No. 01 above but depth exc 1.5m but n. exc 3.00 metre.

Dismantling of concrete/steel poles of any description in any position including taking out poles, ACSR conductor of any type, insulators, cross arms etc complete all as specified and directed.

M&L for steel tubular swaged poles complete with base plate welded with pole, finial taper plug, bolt, nut and screws as specified type 410 SP-31 (9m long) including one coat of red-oxide zinc chrome primer and two coats of aluminium paint on surfaces exposed to view and making 30cm wide strips (total 5 Nos) with yellow and black paint alternately on external surface above PCC benching including numbering with fluorescent yellow paint and painting with bituminous paint internally complete and externally for portion embedded in PCC, complete all as specified and directed by Engr-in-Charge. Note: Earth work and PCC shall be measured and paid for separately.

Dismantling of over head (ACSR) aluminum conductor steel reinforced of any sizes from HT/LT lines after opening the binding from insulators and kept in safe custody for reuse serviceable ACSR conductor in the work and removing unserviceable conductor from site complete all as specified and directed.

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10sqmm 4 core complete all as specified and directed.

PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping, apege stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating and including necessary form work complete and all as specified and directed .

M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) for foundation of pole, stay assembly etc as mass concrete complete and all as specified and directed.

Supply, installation, commissioning and testing LT feeder pillar box outdoor type of size 0.90 mtr x.0.50 mtr x 0.60 mtr factory fabricated made out of MS sheet of thickness 3.15 mm with front door openable with locking arrangement mounted on angle iron legs made out of angle iron size 40 mm x 40 mm x 6 mm, 1.0 mtr long, 0.50 mtr above ground level and 0.50 mtr embedded in PCC blocks of size 0.30 mtr x 0.30 mtr x 0.50 mtr - 04 Nos, duly painted with two coats of synthetic enemel paint over a coat of red oxide, complete with 200 Amp rated copper bus bar LED phase indicators, suitable for 3 phase 4 wire supply system with MCCB 63 Amp 4 pole breaking capacity 16 KA -01 No, duly drilled holes for cable connection mounted on epoxy based post insulators all as required at site, complete all as specified and directed .

Earthing with galvanized steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit less than 2.25 mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr deep below normal ground level, connected to galvanized iron strip of size 32x6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel complete with 40mm dia light grade protection pipe, 20mm dia GI light grade watering pipe with funnel including char coal dust, salt, PCC 1:2:4 in pit with precast RCC M-15 cover reinforced with XPM not less then 4.00 Kg per sqm including necessary earth work in any type of soil, removal of surplus soil to a distance not exc 50m, returning filling in complete as shown in electrical plate No 3 of SSR Part-I (2009), and connected to earthing test point all as specified or indicated, including testing on completion. Note: The rates for earthing includes the cost of earth lead and protection pipe upto 7.50m length.

Supply and fix LED street light 45 W IP 65 complete all as specified.

Supply and fix PVC junction box with TPN aluminium bus bar and MCB SP 6 Amp- 01 No complete (including fixing arrangement) complete all as specified and directed.

M&L for fabrication of street light bracket made out of GI pipe 40mm dia medium grade GI Pipe minimum 1.5 Mtr long including fixing with 02 Nos MS clamps made out of flat iron of size 40mm x 6 mm with nut bolts and washer complete all as specified and directed.

M&L for copper conductor cable PVC insulated single core 1.5 Sqmm (two run for Phase & Neutral) and single run 1.5 Sqmm copper conductor cable for earth wire (Green Colour) from junction box to street light in PVC conduit complete all as specified and directed.

M/s Sheetal Associates

M/S THAKUR ENTERPRISES

R K BUILDERS