DHULE/ DMC/WSD-LD/155/2024-25 Providing Annual Maintainance of Water Supply At Dhule City

Amount

LIFTING AND SHIFTING OF MOTORS :- Lifting and Shifting Of All Types Of LT Motors ( AC ) Or Submersible Pump Motors ( AC ) OF The Following Categories From Its Location To the Workshop And Back to its Location Within the premises of BCPL ,Lepetkata Only major equipments like crane /hydra ,hand Trolly / Battery Trolly / Tractor - trainler/Truck As per Requirement Shall be Provided By BCPL All Other Arrangements Required Such As Lifting Tools,Tackles,Slings,D-Shackles,Tripods,Chain Pulley Blocks Etc And Any other tool of such a nature shall be in the scope of contractor for further details refer special conditions of contract and scope of work in the tender documents Motor Up To & Including 1.0 KW

Motor Up To & Including 5 KW

Providing and fixing in position at site of work L.T.power contanctors kits with necessary connection with test and trial etc.complete DOL STARTER PANEL:- ML 2

Motor Above 7.5 KW Upto And Including 37 KW

Motor Above 37 KW & Including 55 KW

Motor Up To & Including 45 KW

Motor Above 55 KW & Including 110 KW

Motor Up To & Including 93 KW

Motor Up To & Including 75 KW

Motor Above 110 KW & Including 200 KW

Dismantling , removing, reassembly and reerrection of ,125 H.P motor set Complete. MJP/ O&M/ LB 2-a ,and MO 5-10 page no.83

Dismantling , removing, reassembly and reerrection of 150 H.P motor set Complete. MJP/ O&M/ LB 2-a ,and MO 5-10 page no.83

Dismantling , removing, complete servicing overhaulling of pump and reassembly including rubber packing complete. MJP/ O&M/ CF-4-9

Dismantling , removing, reassembly and reerrection of 200 M.M. dia ,125 H.P. vertical pump set with suspension length of column pipe. Complete. MJP/ O&M/ LB 1-7-a ,and PM 8-3 page no.7

Disassembly of column pipe ,bowl assembly ,discharge head Complete. MJP/ O&M/ LB 2-a ,and MO 5-10 page no.83

Couple Set For Centrifugal Type Pump Suitable For 40/60/75/ H.P Motors

Couple Set For Centrifugal Type Pump Suitable For 125 /150 H.P Motors

Bearing For Openwell / Submersible Pump

Bearing 30313 J2Q

Bearing 10224

Bearing 6318

Bearing 6313

Bearing 30222A

Bearing 10224

Bearing 6306

Bearing 6307

Mechanical Oil Seal For S.S Motor

REPAIRS OF SUBMERSIBLE PUMPS 5 To 15 Hp Submersible Pump Sets Carring Out Repair And Servicing Of Submersible Pumps Of all Categories With Overhauling And providing Required Spares ,Assembling After repairs.and giving Test and Trial With Following Terms. Providing And Fixing Of Bronze /s.s Impeller ( as per type of pump Sets )

Providing And Fixing Of wearing ring ( as per type of pump Sets )

Providing And Fixing Of Pump bearing Bushes ( as per type of pump Sets )

Providing And Fixing Of Pump Shaft Sleeve ( as per type of pump Sets )

Providing And Fixing Of Dischange Case/NRV case ( as per type of pump Sets )

Complete Servicing Overhauling Of Pump Set ( as per type of pump Sets )

30 TO 50 HP SUBMERSSIBLE PUMP SETS:- Providing And Fixing Of Bronze /s.s Impeller ( as per type of pump Sets ) sub-3-1

Providing And Fixing Of wearing ring ( as per type of pump Sets )sub-3-2

Providing And Fixing Of Pump bearing Bushes ( as per type of pump Sets )sub-3-3

Providing And Fixing Of Pump Shaft Sleeve ( as per type of pump Sets )sub-3-4

Providing And Fixing Of Dischange Case/NRV case ( as per type of pump Sets )sub-3-5

Complete Servicing Overhauling Of Pump Set ( as per type of pump Sets )sub-3-6

REPAIRS To CENTRIFUGAL PUMPS :-> 30 HP AND UP TO 50 HP Centrifugal Pump Sets Carring Out Repair And Servicing Of Submersible Pumps Of all Categories With Overhauling And providing Required Spares ,Assembling After repairs.and giving Test and Trial With Following Terms. 1 ) The all scrap material removed from pumps shall be retained by the service provider/repairer 2 ) tha rates shall be exclusive of to & fro trasnporatation charges and loading - unloading 3 ) tha rates shall be inclusive of testing charges at workshop / at site of works 4 ) A minimum guarantee Of six Months Shall have to be given by the repaires / service Provider.

Providing And Fixing Of Shaft brearing Bush ( as per type of pump Sets )

Providing And Fixing Of Coupling ( as per type of pump Sets )

Providing And Fixing Of Pump Shaft ( as per type of pump Sets )

Providing And Fixing Of Shaft sleeves ( as per type of pump Sets )

Providing And Fixing Of lantorn Ring ( as per type of pump Sets )

Providing And Fixing Of Bearing lock nut ( as per type of pump Sets )

Providing And Fixing Of Pump gland ( as per type of pump Sets )

Complete Servicing Overhauling Of Pump Set including rubber packing for sealing providing and applying oil paint etc complete ( as per type of pump Sets )

> 50 HP AND UP TO 75 HP Centrifugal Pump Sets :-Providing And Fixing Of casing / wearing ( as per type of pump Sets )

Providing And Fixing Of Shaft brearing Bush ( as per type of pump Sets )

Providing And Fixing Of Coupling ( as per type of pump Sets )

Providing And Fixing Of Pump Shaft ( as per type of pump Sets )

Providing And Fixing Of Shaft sleeves ( as per type of pump Sets )

Providing And Fixing Of lantorn Ring ( as per type of pump Sets )

Providing And Fixing Of Bearing lock nut ( as per type of pump Sets )

Providing And Fixing Of Pump gland ( as per type of pump Sets )

Complete Servicing Overhauling Of Pump Set including rubber packing for sealing providing and applying oil paint etc complete ( as per type of pump Sets )

> 75 HP AND UP TO 100 HP Centrifugal Pump Sets:- Providing And Fixing Of casing / wearing ( as per type of pump Sets )

Providing And Fixing Of Shaft brearing Bush ( as per type of pump Sets )

Providing And Fixing Of Coupling ( as per type of pump Sets )

Providing And Fixing Of Pump Shaft ( as per type of pump Sets )

Providing And Fixing Of Shaft sleeves ( as per type of pump Sets )

Providing And Fixing Of lantorn Ring ( as per type of pump Sets )

Providing And Fixing Of Bearing lock nut ( as per type of pump Sets )

Providing And Fixing Of Pump gland ( as per type of pump Sets )

Complete Servicing Overhauling Of Pump Set including rubber packing for sealing providing and applying oil paint etc complete ( as per type of pump Sets )

> 100 HP AND UP TO 150 HP Centrifugal Pump Sets;- Providing And Fixing Of casing / wearing ( as per type of pump Sets )

Providing And Fixing Of Shaft brearing Bush ( as per type of pump Sets )

Providing And Fixing Of Coupling ( as per type of pump Sets )

Providing And Fixing Of Pump Shaft ( as per type of pump Sets )

Providing And Fixing Of Shaft sleeves ( as per type of pump Sets )

Providing And Fixing Of lantorn Ring ( as per type of pump Sets )

Providing And Fixing Of Bearing lock nut ( as per type of pump Sets )

Providing And Fixing Of Pump gland ( as per type of pump Sets )

Complete Servicing Overhauling Of Pump Set including rubber packing for sealing providing and applying oil paint etc complete ( as per type of pump Sets )

REWINDING OF SUBMERSIBLE MOTORS:- 1.5 HP Complete rewinding of Submersible motors with necessary dismentalling and repairs in workshop necessary standard quantity insulated submersible rewinding wires,submersible cable jointing kits etc with all insulation material cleaning ,scarping,painting and testing at workshop etc copmlete

REWINDING OF SQUIRAL CAGE INDUCTION MOTORS:- Rewinding and repairs of squiral cage induction motors 440V.3Ph .50Hz with "F" class insulation including baking Varnishing, paintiong etc,.The scrap material to be retain by 25HP

OVERHAULING OF SQUIRAL CAGE INDUCTION MOTORS:- Servicing and overhauyling of L.T motors including dismentling, cleaning the winding,drying,applying,varnish,baking,changing the bearing,assembling and giving test anmd trial.415V,3PH,Up to 5HP

415V,3PH,Up to 6HP to 10HP

415V,3PH,Up to 12.5HP to 20HP

415V,3PH,Up to 25HP to 35HP

415V,3PH,Up to 40HP to 50HP

415V,3PH,Up to 60HP to 100HP

415V,3PH,Up to 125HP to 200HP

415V,3PH,Up to 225HP to 300HP

PANEL BOARD CONNECTED LOAD UP TO:- 10HP

OVERHAULING OF L.T. STARTERS/CONTEROL SWITCH GEARS:- Complete overhauling of starter board including checking all cable wires connections,control circuit,making proper terminals,testing megger values,measuring leakages current,opration of moving and fixed contactors checking complete job and submitting the test report after the job. The job is exculuding travelling charges and taxes.DOL STARTER Up to 10HP

STAR DELTA STARTER:- >7.5HP & Up to 12.5HP

>12.5HP & Up to 20HP

>20HP & Up 30HP

AUTO TRANSFORMER STRARTER:- 40HP

SOFT STARTER/FCMA STARTER 100 to 200 HP

L.T. STARTER REWIRING;- Complete starter rewiring testing and commissioning at site etc. complete including cost of all re-wiring material like wires,lugs,terminals,ferrules etc.excluding cost of contactors and submitting the test report after job. This jobis including travelling charges and taxes.DOL STARTER Upto 12 HP

FULLY AUTOMATIC ATS STARTER:-40 to 60 HP

POWER CONTACTOR/RELAYS TIMMERS/ COILS;- Power Contractors,Providing and fixing in position at site of work L.T.Power contanctors similar to L&T makewith necessary connection with test and trial etc.complete.25 AMP

CONTACTOR COILS Providing and fixing in position at site of work L.T.power contanctors spare coil with necessary connection with test and trial etc. Complete :- ML 2

power contanctor kits:- Providing and fixing in position at site of work L.T.power contanctors kits with necessary connection with test and trial etc.complete ML 2

Contactor Relays:- Providing and fixing in position at site of work L.T.power contanctors relay with necessary connection with test and trial etc complete 0.15-0.25 AMP

TIMMERS:- Providing and fixing in position at site of work L.T.power contanctors electronics timmer similar to type E100 with necessary connection with test and trial etc complete.3-10 AMP

9-30 AMP 110/240/50Hz

REWINDING OF ATS:- Complete rewinding of auto transformer for squirrel cage induction motor with super enamelled copper 'conductor with necessary complet testing and trial with submission of necessary test reports as per terms and conditions given below.40 to 60 HP

Supplying and erecting triple pole metal clad HC type rewireable fuse and switch 415V, 63A with neutral link on angle iron /GI frame as per specification no. SW-SWR/MTP 5-1-12

Supplying and erecting triple pole metal clad HRC fuse switch 415V, 100 A. with neutral link with HRC fuses on angle iron /GI frame as per specification no. SW-SWR/TPHRC.5-1-16

Supplying and erecting triple pole metal clad HRC fuse switch 415V, 200A with neutral link with HRC fuses on angle iron /GI frame as per specification no. SW-SWR/TPHRC.5-1-17

Supplying and erecting triple pole metal clad HRC fuse switch 415V, 300-320 A with neutral link with HRC fuses, on angle iron /GI frame as per specification no. SW-SWR/TPHRC.5-1-18

Making the site clear of dismantled DB and switch gears by refilling the holes with cement mortar & finishing in an approved manner complete 5-12-2

Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.. 6-3-7

Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. 6-3-8

Supplying and erecting Intelligent flush mounted panel meter three phase four wire (IPM) input voltage measurement range 50- 550 V AC (P-P) 415V, aux. supply 90-300 V AC/DC, flush mounting 96 x 96 mm, flush mounted (96 x 96 mm) meter constant Wh viewing in LCD multifunction meters in auto scroll mode with voltage, current, frequency, power factor kW, kVA, kVAR, kWh, kVAh, kVARh, phase angle, interrupts, THD, complete with RS 485 communication protocol, class 1 accuracy and wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer. 6-3-9

Supplying and erecting dual source intelligent flush mounted panel meter three phase four wire (IPM) 415V CT/ PT site programmable class I flush mounted (96 x 96 mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering with LED display (excluding CT'S) complete with RS 485 communication protocol, class I accuracy and wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer. 6-3-10

Supplying, erecting & terminating XLPE armoured cable 3½ core 95 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 7-1-19

Supplying, erecting & terminating XLPE armoured cable 3½ core 150 sq. mm. aluminium conductor with continuous 12.97 sq. mm.(8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 7-1-21

Supplying, erecting & terminating XLPE armoured cable 1100 V. 3½ core 185 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 7-1-22

Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU 7-2-16

Supplying, erecting & terminating XLPE armoured cable 3 core 25 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU 7-2-19

Supplying and erecting flat flexible 3 core 6 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete 12-4-10

Supplying and erecting pump protection relay comprising current sensing phase failure and UV+OV relay with dry run and overload protection suitable for 3 phase pumps.(Similar to Minilec -D2 MPR 2 model) (12-5-7)

Supplying and erecting fully Automatic star/delta starter suitable for 12.5 H.P. to 15 H.P. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame. (similar to L & T make MK-1 FASD model.) (12-5-4)

Providing M.S.hardware with washers

Providing machine work for pump set shaft and cutting filling the job work as per appropriate design coplete with necessary packings,rings ( for open well/ submersible /monoblock pumps)

Providing machine work for pump set shaft and cutting filling the job work as per appropriate design coplete with necessary packings,rings ( for 40/60/75/100 HP CENTRIFUGAL PUMPS )

ELECTRONICS MOTOR PROTECTION RELAY- Providing installing in panel EMPR for protection like phase failure,locked rotor,phase revarsal with trip indication and adjustable over current function ,din

Supplying and topping up filtered transformer oil of approved make with test certificate. (17-3-2)

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.(6-1-19)

Supplying and erecting two pole metal clad changeover switch 240 V, 32 A erected on angle iron/GI frame and duly connected with suitable wire leads complete (5-1-9)

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (5-3-11)

Providing & erecting 3 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB (5-5-3)

Providing & erecting 3 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB (5-5-4)

Providing & erecting floor/wall mounted MCCB panel board, with door, suitable for four pole incoming 250A, 2 ways four pole outgoing, up to 100 A MCCBs on iron frame, as per specification no SW-SWR/MCCBPB. (Excluding MCCBs) (5-7-1)

Providing & erecting floor/wall mounting, MCCB panel board, with door, suitable for four pole incoming 250A, 4 ways four pole outgoing, up to 100 A MCCBs on iron frame, as per specification no SW-SWR/MCCBPB. (Excluding MCCBs) (5-7-2)

Supplying & erecting HRC fuse cartridge 415V, 400A (5-10-21)

Supplying and erecting Fuse Base for DIN type HRC Fuse cartridge 500V, above 250A- 400A (5-10-41)

Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for above 630A up to 800A MCCB. (5-11-16)

Dismantling any type of unserviceable feeder pillar, switch gear panel, capacitor panel, metering panel, bus-bar panel, electronic equipment panel, etc. and making the site as required, Approx. size (up to 150 cm x 70 cm x 45 cm ) - Small Cupboard (5-12-4)

Dismantling any type of unserviceable feeder pillar, switch gear panel, capacitor panel, metering panel, bus-bar panel, electronic equipment panel, etc. and making the site as required, Approx. size (up to 200cm. x 90 cm x 45 cm and above) - Big Cupboard (5-12-5)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (7-2-21)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (7-2-22)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 70 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (7-2-23)

OM SHRI MANGALMURTI ELECTRICALS AND CONTRACTORS (BID ID -6581794)

Pandit electrical dhule (BID ID -6581527)