Loading…
Loading…
Tender ID
Tender Value
₹9.3 L
EMD Value
₹23,153
Closing Date
4 Mar 2026, 3:00 pmClosed
Secretary Ayiloor Gramapanchayat
Secretary Ayiloor Gramapanchayat, Ayiloor P.O, Palakkad district
NREGA Material Work -Refer Tender Notice
2026_DP_833713_1
906777-2025-26
Open Tender
Raw Materials
Item Rate
180 days
Ayiloor Gramapanchayat
Refer Tender Notice
6 documents required · 6 mandatory
₹2,045
Yes
₹23,153
Yes
5 Feb 2026
5 Feb 2026
5 Mar 2026
5 Feb 2026
4 Mar 2026
5 Feb 2026
Supplying variuos materials
Stone Aggregate(single size): 40 mm nominal size
Stone Aggregate(single size):20 mm nominal size
Coarse sand (zone III)
Portland Cement
Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper
Vibrator (Needle type 40 mm)
Stone for masonry work
wall form panel 1250x500 mm
Corner angle 45x45x5 mm 1.50 m long
100 mm channel shoulder 2.5 m long
Double clip (bridge clip)
Single clip
M.S. Tube 40 mm dia
Stone Aggregate(single size): 10 mm nominal size
Solid blocks of size 30x20x20cm
Solid blocks of size 40x20x15cm
Structural steel such as tees, angles, channels and R.S. joists
Red oxide Zinc chromate primer
Adjustable telescopic prop 3 m (2.02-3.75m)
Beam clamp 300-380 mm (450-1070 mm)
Second class kail wood in planks
Second class kail wood in scantling
Hollock ballies 125 mm diameter
Adjustable span ESO+SI (2.35-3.40)
Twisted steel/deformed bars
Fine sand (zone IV)
Vitrified floor tile 60x60 cm
Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.
Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black
Mild steel tubes electric resistant or induction butt welded
Mild steel round bar 12 mm dia and below
Flats up to 10 mm in thickness
Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm
Factory made glass reinforced plastic door frame 90x45 mm i/c carriage
30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage
Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm
Bright finished or black enameled mild steel screws 40 mm
Bright finished or black enameled mild steel screws 20 mm
Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)
Multi surface paint
Special primer (C.W)
Epoxy paint
Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers
Vitreous china pedestal type wate closet
Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)
Vitreous China flat back wash basin 630x450 mm
15 mm C.P.brass tap
C.P. brass waste 32 mm
C.I. bracket for wash basin and sinks
Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm
Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings
Polyethylene water storage tank with cover and suitable locking arrangemnet
PVC pipe 15 mm outer dia 10kgf/cm2
PVC pipe 20 mm outer dia 10 kfg/cm2
PVC pipe 32 mm outer dia. 10Kgf/cm2
PVC pipe 40 mm outer dia. 10kgf/cm2
PVC pipe 63 mm outer dia . 6kgf/cm2
PVC pipe 110 mm outer dia 6kgf/cm2
Mild steel tubes hot finished welded type
Welding by electric plant
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.13 MB
NREGANIT.pdf
Tender Documents • 1.11 MB
BOQ_1402174.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .