Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.9 CrAccepted-AOC | ₹24.9 Cr | L1 | Accepted-AOC L1 bidder |
| 2 | L2₹25.0 CrRejected-AOC | ₹25.0 Cr | L2 | Rejected-AOC L2 bidder |
| 3 | Rejected-Technical | - | - | Rejected-Technical Disqualified by technical evaluation committee |
| 4 | Rejected-Technical 106 DLF COMMERCIAL TOWER SHIVAJI MARG NEW DELHI | NEW DELHI | NEW DELHI | DELHI | 110015 | - | - | Rejected-Technical Disqualified by technical evaluation committee |
| Sl No | Description | Qty | Unit | LA MONAT PRIVATE LIMITED L1 | PILKHUWA TEXTILE MILLS PRIVATE LIMITED L2 |
|---|---|---|---|---|---|
| 1.00PART-I (FOR 50 BRTF) | |||||
| 1.01AMMUNITION BUNKER (PRECAST) OF SIZE 17X3.6X3.6 MTR (07 Nos.) | |||||
| 1.02 | Supply and installation of Semi Under Ground Pre-Cast RCC Segmental Box structure of concrete M-40 grade 17x3.60x 3.60 Mtr using Fe 500/550D grade steel including conforming to IRC/ BIS standards/ guidelines/ Codes including excavation, back filling with filter media, PCC M-15 levelling course, placing and joining the segment and providing desired slope all as per Technical Specification and as directed by Engineer-in-Charge. (01 No./ Bunker) | 7 | Nos. | 73,00,000 ₹5.1 Cr | 75,00,000 ₹5.3 Cr |
| 1.03 | Supply and installation of Precast Retaining Wall 2.50 x 2.00 Mtr including excavation, back filling, filter media, PCC 1:2:4, weep holes 100mm dia PVC pipe weep holes, installation precast RCC wall segment and providing desired slope inside all as per Technical Specification and as directed by Engineer-in-Charge. (08 Nos./ Bunker) | 56 | Nos. | 70,000 ₹39.2 L | 50,000 ₹28 L |
| 1.04 | RRM Masonry wing walls with RRM 1:6 and leveling course with PCC 1:2:4 for RRM wall foundation over the well compacted and prepared base all as per Technical Specification and as directed by Engineer-in-Charge (04 Nos./ Bunker) | 28 | Nos. | 50,000 ₹14 L | 1,00,000 ₹28 L |
| 1.05 | Supply and construction of Rainwater Harvesting Catch pit 2x2x2 Mtr including excavation of pit, RRM 1:6 side walls, laying of filter layers and compacting, steel grill mesh above pit, 1 HP submersible pump including piping upto exit point, wiring and installation all as per Technical Specification and as directed by Engineer-in-Charge (02 Nos./ Bunker) | 14 | Nos. | 2,50,000 ₹35 L | 2,00,000 ₹28 L |
| 1.06 | Supply and installation of flame proof tube light (fire resistant) inside bunkers including cable 4mm, insulation, ASD fittings, bolting and steel plate connections for each box segment all as per Technical Specification and as directed by Engineer-in-Charge. (08 No./ Bunker) | 56 | Nos. | 10,000 ₹5.6 L | 12,000 ₹6.7 L |
| 1.07 | Supply and installation of Heavy Duty Ventilator fan including cable 4mm, insulation, ASD fittings, bolting and steel plate connections for each box segment all as per Technical Specification and as directed by Engineer-in-Charge. (02 Nos./ Bunker) | 14 | Nos. | 33,000 ₹4.6 L | 25,000 ₹3.5 L |
| 1.08 | Supply and installation of Generator Set 5 KVA including all accessories, installation, wiring to all electrical fixtures and weather proof protection chamber all as per Technical Specification and as directed by Engineer-in-Charge. (01 Nos./ Bunker) | 7 | Nos | 3,00,000 ₹21 L | 3,00,000 ₹21 L |
| 1.09 | Supply and installation of Fire Extinguisher and fire fighting sets at entry and exit points all as per CFEES provisions and as directed by Engineer-in-Charge. (05 Nos./ Bunker) | 35 | Nos | 10,000 ₹3.5 L | 10,000 ₹3.5 L |
Tender Value
₹23.1 Cr
EMD Value
₹14.8 L
Closing Date
13 Sept 2025, 6:00 pmClosed
CE Project Himank
CE Project Himank, Choglamsar, Leh-Ladakh
CONSTR OF 20 NOS. AMMUNITION BUNKER (PRECAST) OF SIZE 17x3.6x3.6 MTR, 06 NOS. AMMUNITION BUNKER (PRECAST) OF SIZE 7x3.6x3.6 MTR AND 01 NO. UNDERGROUND STORE (PRECAST) OF SIZE 15x3.6x3.6 MTR AT VARIOUS LOCATIONS IN AoR OF 50 BRTF, 753 BRTF ND 755 BRTF
2025_BRO_726818_1
CE (P) HIMANK/05/2025-26
Open Tender
Civil Works
365 days
Leh-Ladakh
As per tender documents
5 documents required · 5 mandatory
₹0
₹14.8 L
Yes
HQ CE Project Himank
8 Jan 2026
20 Aug 2025
15 Sept 2025
21 Aug 2025
13 Sept 2025
4 Sept 2025
21 Aug 2025 - 3 Sept 2025
3 Sept 2025
Amount
PART-I (FOR 50 BRTF)
AMMUNITION BUNKER (PRECAST) OF SIZE 17X3.6X3.6 MTR (07 Nos.)
Supply and installation of Semi Under Ground Pre-Cast RCC Segmental Box structure of concrete M-40 grade 17x3.60x 3.60 Mtr using Fe 500/550D grade steel including conforming to IRC/ BIS standards/ guidelines/ Codes including excavation, back filling with filter media, PCC M-15 levelling course, placing and joining the segment and providing desired slope all as per Technical Specification and as directed by Engineer-in-Charge. (01 No./ Bunker)
Supply and installation of Precast Retaining Wall 2.50 x 2.00 Mtr including excavation, back filling, filter media, PCC 1:2:4, weep holes 100mm dia PVC pipe weep holes, installation precast RCC wall segment and providing desired slope inside all as per Technical Specification and as directed by Engineer-in-Charge. (08 Nos./ Bunker)
RRM Masonry wing walls with RRM 1:6 and leveling course with PCC 1:2:4 for RRM wall foundation over the well compacted and prepared base all as per Technical Specification and as directed by Engineer-in-Charge (04 Nos./ Bunker)
Supply and construction of Rainwater Harvesting Catch pit 2x2x2 Mtr including excavation of pit, RRM 1:6 side walls, laying of filter layers and compacting, steel grill mesh above pit, 1 HP submersible pump including piping upto exit point, wiring and installation all as per Technical Specification and as directed by Engineer-in-Charge (02 Nos./ Bunker)
Supply and installation of flame proof tube light (fire resistant) inside bunkers including cable 4mm, insulation, ASD fittings, bolting and steel plate connections for each box segment all as per Technical Specification and as directed by Engineer-in-Charge. (08 No./ Bunker)
Supply and installation of Heavy Duty Ventilator fan including cable 4mm, insulation, ASD fittings, bolting and steel plate connections for each box segment all as per Technical Specification and as directed by Engineer-in-Charge. (02 Nos./ Bunker)
Supply and installation of Generator Set 5 KVA including all accessories, installation, wiring to all electrical fixtures and weather proof protection chamber all as per Technical Specification and as directed by Engineer-in-Charge. (01 Nos./ Bunker)
Supply and installation of Fire Extinguisher and fire fighting sets at entry and exit points all as per CFEES provisions and as directed by Engineer-in-Charge. (05 Nos./ Bunker)
Supply and installation of entry and exit gates of MS steel plates 8mm (grade required for cold weather) with fittings in the concrete segment, coated with corrosion resisting paints (two coats) over primer (one coat) all as per Technical Specification and as directed by Engineer-in-Charge. (02 Nos./ Bunker)
Supply and construction of two Nos. (01 Set) Entrance floor with Granular Sub-Base 200mm, Sand Blanketing 25mm, M-50 Grade precast Inter Locking Concrete Blocks 80mm thick, precast M-50 edge restraint 300mm x 180 mm x 200mm and M-35 concrete embedment all as per drawings and specification and as directed by Engineer-in-Charge. (01 Set/ Bunker)
AMMUNITION BUNKER (PRECAST) OF SIZE 7X3.6X3.6 MTR (04 Nos.)
Supply and installation of Semi Under Ground Pre-Cast RCC Segmental Box structure of concrete M-40 grade 7x3.60x 3.60 Mtr using Fe 500/550D grade steel including conforming to IRC/ BIS standards/ guidelines/ Codes including excavation, back filling with filter media, PCC M-15 levelling course, placing and joining the segment and providing desired slope all as per Technical Specification and as directed by Engineer-in-Charge. (01 No./ Bunker)
Supply and installation of Precast Retaining Wall 2.50 x 2.00 Mtr including excavation, back filling, filter media, PCC 1:2:4, weep holes 100mm dia PVC pipe weep holes, installation precast RCC wall segment and providing desired slope inside all as per Technical Specification and as directed by Engineer-in-Charge. (08 Nos./ Bunker)
RRM Masonry wing walls with RRM 1:6 and leveling course with PCC 1:2:4 for RRM wall foundation over the well compacted and prepared base all as per Technical Specification and as directed by Engineer-in-Charge (04 Nos./ Bunker)
Supply and construction of Rainwater Harvesting Catch pit 2x2x2 Mtr including excavation of pit, RRM 1:6 side walls, laying of filter layers and compacting, steel grill mesh above pit, 1 HP submersible pump including piping upto exit point, wiring and installation all as per Technical Specification and as directed by Engineer-in-Charge (02 Nos./ Bunker)
Supply and installation of flame proof tube light (fire resistant) inside bunkers including cable 4mm, insulation, ASD fittings, bolting and steel plate connections for each box segment all as per Technical Specification and as directed by Engineer-in-Charge. (04 No./ Bunker)
Supply and installation of Heavy Duty Ventilator fan including cable 4mm, insulation, ASD fittings, bolting and steel plate connections for each box segment all as per Technical Specification and as directed by Engineer-in-Charge. (02 Nos./ Bunker)
Supply and installation of Generator Set 5 KVA including all accessories, installation, wiring to all electrical fixtures and weather proof protection chamber all as per Technical Specification and as directed by Engineer-in-Charge. (01 Nos./ Bunker)
Supply and installation of Fire Extinguisher and fire fighting sets at entry and exit points all as per CFEES provisions and as directed by Engineer-in-Charge. (03 Nos./ Bunker)
Supply and installation of entry and exit gates of MS steel plates 8mm (grade required for cold weather) with fittings in the concrete segment, coated with corrosion resisting paints (two coats) over primer (one coat) all as per Technical Specification and as directed by Engineer-in-Charge. (02 Nos./ Bunker)
Supply and construction of two Nos. (01 Set) Entrance floor with Granular Sub-Base 200mm, Sand Blanketing 25mm, M-50 Grade precast Inter Locking Concrete Blocks 80mm thick, precast M-50 edge restraint 300mm x 180 mm x 200mm and M-35 concrete embedment all as per drawings and specification and as directed by Engineer-in-Charge. (01 Set/ Bunker)
UG STORE (PRECAST) OF SIZE 15X3.6X3.6 MTR (01 No.)
Supply and installation of Semi Under Ground Pre-Cast RCC Segmental Box structure of concrete M-40 grade 15x3.60x 3.60 Mtr using Fe 500/550D grade steel including conforming to IRC/ BIS standards/ guidelines/ Codes including excavation, back filling with filter media, PCC M-15 levelling course, placing and joining the segment and providing desired slope all as per Technical Specification and as directed by Engineer-in-Charge. (01 No./ Bunker)
Supply and installation of Precast Retaining Wall 2.50 x 2.00 Mtr including excavation, back filling, filter media, PCC 1:2:4, weep holes 100mm dia PVC pipe weep holes, installation precast RCC wall segment and providing desired slope inside all as per Technical Specification and as directed by Engineer-in-Charge. (08 Nos./ Bunker)
RRM Masonry wing walls with RRM 1:6 and leveling course with PCC 1:2:4 for RRM wall foundation over the well compacted and prepared base all as per Technical Specification and as directed by Engineer-in-Charge (04 Nos./ Bunker)
Supply and construction of Rainwater Harvesting Catch pit 2x2x2 Mtr including excavation of pit, RRM 1:6 side walls, laying of filter layers and compacting, steel grill mesh above pit, 1 HP submersible pump including piping upto exit point, wiring and installation all as per Technical Specification and as directed by Engineer-in-Charge (02 Nos./ Bunker)
Supply and installation of flame proof tube light (fire resistant) inside bunkers including cable 4mm, insulation, ASD fittings, bolting and steel plate connections for each box segment all as per Technical Specification and as directed by Engineer-in-Charge. (08 No./ Bunker)
Supply and installation of Heavy Duty Ventilator fan including cable 4mm, insulation, ASD fittings, bolting and steel plate connections for each box segment all as per Technical Specification and as directed by Engineer-in-Charge. (02 Nos./ Bunker)
Supply and installation of Generator Set 5 KVA including all accessories, installation, wiring to all electrical fixtures and weather proof protection chamber all as per Technical Specification and as directed by Engineer-in-Charge. (01 Nos./ Bunker)
Supply and installation of Fire Extinguisher and fire fighting sets at entry and exit points all as per CFEES provisions and as directed by Engineer-in-Charge. (05 Nos./ Bunker)
Supply and installation of entry and exit gates of MS steel plates 8mm (grade required for cold weather) with fittings in the concrete segment, coated with corrosion resisting paints (two coats) over primer (one coat) all as per Technical Specification and as directed by Engineer-in-Charge. (02 Nos./ Bunker)
Supply and construction of two Nos. (01 Set) Entrance floor with Granular Sub-Base 200mm, Sand Blanketing 25mm, M-50 Grade precast Inter Locking Concrete Blocks 80mm thick, precast M-50 edge restraint 300mm x 180 mm x 200mm and M-35 concrete embedment all as per drawings and specification and as directed by Engineer-in-Charge. (01 Set/ Bunker)
PART-II (FOR 753 BRTF)
AMMUNITION BUNKER (PRECAST) OF SIZE 17X3.6X3.6 MTR (03 Nos.)
Supply and installation of Semi Under Ground Pre-Cast RCC Segmental Box structure of concrete M-40 grade 17x3.60x 3.60 Mtr using Fe 500/550D grade steel including conforming to IRC/ BIS standards/ guidelines/ Codes including excavation, back filling with filter media, PCC M-15 levelling course, placing and joining the segment and providing desired slope all as per Technical Specification and as directed by Engineer-in-Charge. (01 No./ Bunker)
Supply and installation of Precast Retaining Wall 2.50 x 2.00 Mtr including excavation, back filling, filter media, PCC 1:2:4, weep holes 100mm dia PVC pipe weep holes, installation precast RCC wall segment and providing desired slope inside all as per Technical Specification and as directed by Engineer-in-Charge. (08 Nos./ Bunker)
RRM Masonry wing walls with RRM 1:6 and leveling course with PCC 1:2:4 for RRM wall foundation over the well compacted and prepared base all as per Technical Specification and as directed by Engineer-in-Charge (04 Nos./ Bunker)
Supply and construction of Rainwater Harvesting Catch pit 2x2x2 Mtr including excavation of pit, RRM 1:6 side walls, laying of filter layers and compacting, steel grill mesh above pit, 1 HP submersible pump including piping upto exit point, wiring and installation all as per Technical Specification and as directed by Engineer-in-Charge (02 Nos./ Bunker)
Supply and installation of flame proof tube light (fire resistant) inside bunkers including cable 4mm, insulation, ASD fittings, bolting and steel plate connections for each box segment all as per Technical Specification and as directed by Engineer-in-Charge. (08 No./ Bunker)
Supply and installation of Heavy Duty Ventilator fan including cable 4mm, insulation, ASD fittings, bolting and steel plate connections for each box segment all as per Technical Specification and as directed by Engineer-in-Charge. (02 Nos./ Bunker)
Supply and installation of Generator Set 5 KVA including all accessories, installation, wiring to all electrical fixtures and weather proof protection chamber all as per Technical Specification and as directed by Engineer-in-Charge. (01 Nos./ Bunker)
Supply and installation of Fire Extinguisher and fire fighting sets at entry and exit points all as per CFEES provisions and as directed by Engineer-in-Charge. (05 Nos./ Bunker)
Supply and installation of entry and exit gates of MS steel plates 8mm (grade required for cold weather) with fittings in the concrete segment, coated with corrosion resisting paints (two coats) over primer (one coat) all as per Technical Specification and as directed by Engineer-in-Charge. (02 Nos./ Bunker)
Supply and construction of two Nos. (01 Set) Entrance floor with Granular Sub-Base 200mm, Sand Blanketing 25mm, M-50 Grade precast Inter Locking Concrete Blocks 80mm thick, precast M-50 edge restraint 300mm x 180 mm x 200mm and M-35 concrete embedment all as per drawings and specification and as directed by Engineer-in-Charge. (01 Set/ Bunker)
PART-III (FOR 755 BRTF)
AMMUNITION BUNKER (PRECAST) OF SIZE 17X3.6X3.6 MTR (10 Nos.)
Supply and installation of Semi Under Ground Pre-Cast RCC Segmental Box structure of concrete M-40 grade 17x3.60x 3.60 Mtr using Fe 500/550D grade steel including conforming to IRC/ BIS standards/ guidelines/ Codes including excavation, back filling with filter media, PCC M-15 levelling course, placing and joining the segment and providing desired slope all as per Technical Specification and as directed by Engineer-in-Charge. (01 No./ Bunker)
Supply and installation of Precast Retaining Wall 2.50 x 2.00 Mtr including excavation, back filling, filter media, PCC 1:2:4, weep holes 100mm dia PVC pipe weep holes, installation precast RCC wall segment and providing desired slope inside all as per Technical Specification and as directed by Engineer-in-Charge. (08 Nos./ Bunker)
RRM Masonry wing walls with RRM 1:6 and leveling course with PCC 1:2:4 for RRM wall foundation over the well compacted and prepared base all as per Technical Specification and as directed by Engineer-in-Charge (04 Nos./ Bunker)
Supply and construction of Rainwater Harvesting Catch pit 2x2x2 Mtr including excavation of pit, RRM 1:6 side walls, laying of filter layers and compacting, steel grill mesh above pit, 1 HP submersible pump including piping upto exit point, wiring and installation all as per Technical Specification and as directed by Engineer-in-Charge (02 Nos./ Bunker)
Supply and installation of flame proof tube light (fire resistant) inside bunkers including cable 4mm, insulation, ASD fittings, bolting and steel plate connections for each box segment all as per Technical Specification and as directed by Engineer-in-Charge. (08 No./ Bunker)
Supply and installation of Heavy Duty Ventilator fan including cable 4mm, insulation, ASD fittings, bolting and steel plate connections for each box segment all as per Technical Specification and as directed by Engineer-in-Charge. (02 Nos./ Bunker)
Supply and installation of Generator Set 5 KVA including all accessories, installation, wiring to all electrical fixtures and weather proof protection chamber all as per Technical Specification and as directed by Engineer-in-Charge. (01 Nos./ Bunker)
Supply and installation of Fire Extinguisher and fire fighting sets at entry and exit points all as per CFEES provisions and as directed by Engineer-in-Charge. (05 Nos./ Bunker)
Supply and installation of entry and exit gates of MS steel plates 8mm (grade required for cold weather) with fittings in the concrete segment, coated with corrosion resisting paints (two coats) over primer (one coat) all as per Technical Specification and as directed by Engineer-in-Charge. (02 Nos./ Bunker)
Supply and construction of two Nos. (01 Set) Entrance floor with Granular Sub-Base 200mm, Sand Blanketing 25mm, M-50 Grade precast Inter Locking Concrete Blocks 80mm thick, precast M-50 edge restraint 300mm x 180 mm x 200mm and M-35 concrete embedment all as per drawings and specification and as directed by Engineer-in-Charge. (01 Set/ Bunker)
AMMUNITION BUNKER (PRECAST) OF SIZE 7X3.6X3.6 MTR (02 Nos.)
Supply and installation of Semi Under Ground Pre-Cast RCC Segmental Box structure of concrete M-40 grade 7x3.60x 3.60 Mtr using Fe 500/550D grade steel including conforming to IRC/ BIS standards/ guidelines/ Codes including excavation, back filling with filter media, PCC M-15 levelling course, placing and joining the segment and providing desired slope all as per Technical Specification and as directed by Engineer-in-Charge. (01 No./ Bunker)
Supply and installation of Precast Retaining Wall 2.50 x 2.00 Mtr including excavation, back filling, filter media, PCC 1:2:4, weep holes 100mm dia PVC pipe weep holes, installation precast RCC wall segment and providing desired slope inside all as per Technical Specification and as directed by Engineer-in-Charge. (08 Nos./ Bunker)
RRM Masonry wing walls with RRM 1:6 and leveling course with PCC 1:2:4 for RRM wall foundation over the well compacted and prepared base all as per Technical Specification and as directed by Engineer-in-Charge (04 Nos./ Bunker)
Supply and construction of Rainwater Harvesting Catch pit 2x2x2 Mtr including excavation of pit, RRM 1:6 side walls, laying of filter layers and compacting, steel grill mesh above pit, 1 HP submersible pump including piping upto exit point, wiring and installation all as per Technical Specification and as directed by Engineer-in-Charge (02 Nos./ Bunker)
Supply and installation of flame proof tube light (fire resistant) inside bunkers including cable 4mm, insulation, ASD fittings, bolting and steel plate connections for each box segment all as per Technical Specification and as directed by Engineer-in-Charge. (04 No./ Bunker)
Supply and installation of Heavy Duty Ventilator fan including cable 4mm, insulation, ASD fittings, bolting and steel plate connections for each box segment all as per Technical Specification and as directed by Engineer-in-Charge. (02 Nos./ Bunker)
Supply and installation of Generator Set 5 KVA including all accessories, installation, wiring to all electrical fixtures and weather proof protection chamber all as per Technical Specification and as directed by Engineer-in-Charge. (01 Nos./ Bunker)
Supply and installation of Fire Extinguisher and fire fighting sets at entry and exit points all as per CFEES provisions and as directed by Engineer-in-Charge. (03 Nos./ Bunker)
Supply and installation of entry and exit gates of MS steel plates 8mm (grade required for cold weather) with fittings in the concrete segment, coated with corrosion resisting paints (two coats) over primer (one coat) all as per Technical Specification and as directed by Engineer-in-Charge. (02 Nos./ Bunker)
Supply and construction of two Nos. (01 Set) Entrance floor with Granular Sub-Base 200mm, Sand Blanketing 25mm, M-50 Grade precast Inter Locking Concrete Blocks 80mm thick, precast M-50 edge restraint 300mm x 180 mm x 200mm and M-35 concrete embedment all as per drawings and specification and as directed by Engineer-in-Charge. (01 Set/ Bunker)
PILKHUWA TEXTILE MILLS PRIVATE LIMITED (BID ID -3421302)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.63 MB
BOQ_813632.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid