Loading…
Loading…
Tender Value
₹2.5 L
EMD Value
₹6,345
Closing Date
9 Jul 2026, 6:00 pmDue today
JASNA P T
The Assistant Engineer, LIDEW Section ,Kalikavu
Annual Plan-2026-27 Kalikav GP-Proj. No 71/27- Kurupoyil Anganvadi Renovation (MGNR - 3L) Ward 4-General Civil Work
2026_LSGD_857526_9
01/TN/AE/LIDEW/KKV/26-27
Open Tender
Civil Works - Buildings
300 days
KALIKAVU GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹560
Yes
₹6,345
Yes
24 Jun 2026
24 Jun 2026
13 Jul 2026
24 Jun 2026
9 Jul 2026
24 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Kurupoyil Anganvadi Inovation | |||||
| 1.001 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 0.2 | kg | - | - |
| 1.002 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 0.4 | kg | - | - |
| 1.003 | 50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete. | 1 | cum | - | - |
| 1.004 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | - | sqm | - | - |
| 1.005 | OD18905/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness
with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25
microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws
of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required | - | sqm | - | - |
| 1.006 | OD18924/2026-2027:od1391733/2021_2022 :supplying and fixing 150mm dia PVC gutter semicircular section including fitting 32
mm x 5 mm MS flat supporters at 1 m interval complete | - | metre | - | - |
| 1.007 | 50.18.9.8.2:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching and refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 4 Kgf/cm2 | - | metre | - | - |
| 1.008 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
Tendernotice_2.pdf
PDF • 0.02 MB
Tendernotice_3.pdf
PDF • 0.02 MB
AFDVT71.pdf
Tender Documents • 0.10 MB
FOT71.pdf
Tender Documents • 0.01 MB
PA71.pdf
Tender Documents • 0.12 MB
SBD71.pdf
Tender Documents • 1.05 MB
BOQ_1449626.xls
BOQ • 0.30 MB
NITCORRIGENDUMTENDER1FINAL.pdf
PDF • 0.42 MB
Download all tender documents and submit your bid