Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.5 LAccepted-AOC | ₹5.5 L | L1 | Accepted-AOC L1 Accepted for further proceedings |
| 2 | L2₹6.5 L+₹94,962 (17.2%)Rejected-Finance | ₹6.5 L+₹94,962 (17.2%) | L2 | Rejected-Finance L2 |
| 3 | L3₹6.5 L+₹95,962 (17.4%)Rejected-Finance | ₹6.5 L+₹95,962 (17.4%) | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | ANEES P. L1 | MOHAMMED SHAMEER K. L2 | P. MOHAMMED L3 |
|---|---|---|---|---|---|---|
| 1.00CIVIL WORKS | ||||||
| 1.01 | 21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 474.81 | Kg | 537.08 ₹2,55,010.96 Lowest | 737.08 ₹3,49,972.96 | 737.08 ₹3,49,972.96 |
| 1.02 | 21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 34.81 | sqm | 1,174.62 ₹40,888.52 Lowest | 1,174.62 ₹40,888.52 Lowest | 1,174.62 ₹40,888.52 Lowest |
| 1.03 | 21.2.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | 68.59 | sqm | 1,095.47 ₹75,138.29 Lowest | 1,095.47 ₹75,138.29 Lowest | 1,095.47 ₹75,138.29 Lowest |
| 1.04 | 9.97.1 Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:300x10 mm | 8 | No | 135.52 ₹1,084.16 Lowest | 135.52 ₹1,084.16 Lowest | 135.52 ₹1,084.16 Lowest |
| 1.05 | 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm | 8 | No | 69.17 ₹553.36 Lowest | 69.17 ₹553.36 Lowest | 69.17 ₹553.36 Lowest |
| 1.06 | 21.13 Providing and fixing Brass100 mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality ) for aluminum doors including necessary cutting and making good etc. complete | 8 | each | 517.8 ₹4,142.4 Lowest | 517.8 ₹4,142.4 Lowest | 517.8 ₹4,142.4 Lowest |
| 1.07 | 10.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | 43.08 | kg | 705.22 ₹30,377.35 Lowest | 705.22 ₹30,377.35 Lowest | 705.22 ₹30,377.35 Lowest |
| 1.08 | 50.10.1 Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 49.43 | kg | 212.12 ₹10,485.09 Lowest | 212.12 ₹10,485.09 Lowest | 212.12 ₹10,485.09 Lowest |
| 1.09 | 50.10.2 Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 403.12 | kg | 171.81 ₹69,260.05 Lowest | 171.81 ₹69,260.05 Lowest | 171.81 ₹69,260.05 Lowest |
Tender Value
₹5.5 L
EMD Value
₹13,788
Closing Date
2 Oct 2025, 1:00 pmClosed
Manager (PED)
STEEL INDUSTRIALS KERALA LTD.ATHANI P.O,THRISSUR- 680 581
Partition work for Therapy Center Wandoor Block Panchayath, Malappuram District Project No.297/25
2025_SILK_802029_1
SILK/PED/S-090/2025-26/1584
Open Tender
Miscellaneous Works
Item Rate
90 days
Wandoor
As per the tender documents
6 documents required · 6 mandatory
₹1,301
₹13,788
Yes
31 Jul 2026
25 Sept 2025
3 Oct 2025
25 Sept 2025
2 Oct 2025
25 Sept 2025
25 Sept 2025 - 2 Oct 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .