Construction of a Rain shelter and a Poly House

Amount

App: I -Construction of rain shelter

2.32 : Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

od3332/2021_2022 : Supplying and fixing UV stabilized Polyethylene film 200 micron thick , 5 layer, IR blocking,Anti drip/fog diffused multi layer ,on the GI truss work with aluminium locking profile and zig zag spring galvanized with hex washer etc.complete but excluding the cost of Aluminium locking profile and zig zag

od3335/2021_2022 : Supplying and providing shade net stabilized 35% including rolling and unrolling machine.

od3336/2021_2022 : Supplying of Aluminium locking profile with Zigzag spring with steel screw including cost of material and conveyance etc.complete.

50.6.1.7 : Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.44.1 : Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

od3343/2021_2022 : Supplying and laying weed control woven net over the floor

4.3.2 : Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

App: II - Poly house

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

od3329/2021_2022 : Supplying and fixing UV stabilized Polyethylene film 200 micron thick ,IR blocking,Anti drip/fog diffused multi layer ,on the GI truss work with aluminium locking profile and zig zag spring galvanized with hex washer etc.complete but excluding the cost of Aluminium locking profile and zig zag

od3330/2021_2022 : Supplying of Aluminium locking profile with Zigzag spring with steel screw including cost of material and conveyance etc.complete.

od3331/2021_2022 : Supplying and providing shade net 75% including all charges for top covering

od3333/2021_2022 : Supplying and fixing HDPE woven skirting with all accessories essential

od3334/2021_2022 : Supplying and fixing 40 mesh insect proof netting sufficient cover the sides and vents including all cost of material, labour charges etc. complete.

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

od3337/2021_2022 : Supplying and laying weed control woven net over the floor

18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

od3338/2021_2022 : Supplying and installing ISI specified 1.5 HP mono block pump set with a discharge of 1.90 - 3.50 lps and total head of minimum 20 - 30 metre including all accessories and elecrical fittings such as main switch, panel board, fuse unit etc. complete

50.18.9.6.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2

50.18.7.5.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10 Kgf/cm2- Internal work- exposed on wall

od3339/2021_2022 : Supplying and fixing PVC ball valve 40mm

od3340/2021_2022 : Supplying and fixing PVC flush valve 40mm

od3341/2021_2022 : Supplying and fixing air release valve 40mm pvc

od3342/2021_2022 : Supplying and fixing pressure guage

od3344/2021_2022 : Supplying and fitting disc filter with fittings etc. complete (20m3/hr)

od3345/2021_2022 : Supplying and fitting screen filter with fittings etc. complete (20m3/hr)

od3346/2021_2022 : Supplying and fixing poly grommet take off 16mm for taking connection from pvc sub main

od3347/2021_2022 : Supplying and laying 16mm LLDP lateral pipe

od3348/2021_2022 : Supplying and fitting micro jet sprinkler with 2 to 3 m wetting diameter and average discharge of 20-30 lph

od3349/2021_2022 : Supplying and laying 6mm micro tube with all fittings

od3350/2021_2022 : Supplying and fixing poly joiners 16mm including all charges

od3351/2021_2022 : Supplying four way fogger emitters 5 to 7 LHP leak prrof snap fit joint fine droplets of average 90 microns, counter weight operating pressure 22 psi at 1.5 m c/c

od3352/2021_2022 : Supplying poly end stop 16mm

od3353/2021_2022 : Supplying G.I. coated wire 2mm cross section

od3354/2021_2022 : Supplying and providing Padlock

PRAMOD.T.P

Bidder Name

PRAMOD.T.P

PEK CONTRACTING