103/EDCB/2023-24

Amount

The work of safe carriage of the following material from CB Ganj store center to work site under the jurisdiction of EDD-Baheri Approx. distance upto 80 Km. Including safe loading and unloading.

ST Pole 11 Mtr

PCC Pole 9.0 Mtr

PCC Pole 8.5 Mtr

ACSR Weasal Conductor

ACSR Dog Conductor

AB Cable 3x95 sqmm

11 KV Incoming Panel (VCB)

11 KV Outgoing Panel (VCB)

33 KV VCB

33 KV XLPE Cable size 3x300 sqmm

11 KV XLPE Cable size 3x120 sqmm

11 KV Straight through Cable Jointing Kit suitable for 11 KV 3x120 sq mm XLPE Cable

33 KV Indoor/Outdoor Cable Jointing Kit suitable for 33 KV 3x300 sq mm XLPE Cable

33 KV Lightening Arrester

33 KV Line Isolator

33 kV Bus Isolator

Other Line material

Dismantling and removing of old and used/damaged 33 KV VCB in Control room including opening/cutting of power cable connection and earthing strip with dragging/cartage from control room to J.E. Store.

Erection/Installation of following new panel (VCB) in control room including grouting of Anchor bolt of Panel and making/repairing of pocket for cable to insert in panel from trench and fixing, taping of bus bar with wiring for PT. AC, DC connection including providing of AC & DC Supply.

11 KV Incoming Panel (VCB)

11 KV Outgoing Panel (VCB)

33 KV VCB

Providing cutting, fixing and welding of MS Strip from existing, earthing to new 11 KV VCB Complete in all respect, all material shall be arranged by the Contractor.

Providing cutting, fixing and welding of MS Strip from existing, earthing to new 11 KV VCB Complete in all respect, all material shall be arranged by the Contractor.

Fixing of 33 KV Lightening Arrester Complete in all respect

Fixing of 33 KV Line Isolator Complete in all respect

Fixing of 33 KV Bus Isolator Complete in all respect

Installation of 11 KV Fuse Set at various DT complete in all respect

Erection of Single/Double pole in H.T/L.T lines including fitting of all accessories as per RESSPO Norms

PCC Pole 8.5 Mtr (Single)

PCC Pole 9 Mtr (Single)

ST Pole 11 Mtr long (Single)

Grouting of following Pole with 1:4:8 mixture in size(450x450x1500mm.) including cost of cement/BB & sand Required as per RESSPO Norms

PCC Pole 8.5 Mtr (Single)

PCC Pole 9 Mtr (Single)

ST Pole 11 Mtr long (Single)

The work of Driving the earthing electrode and making connections with 6 S.W.G. GI wire as per RESSPO Norms

Laying, Stringing & Sagging of Following Conductor complete in all respect

ACSR Weasal Conductor

ACSR Dog Conductor

AB Cable 3x95 sqmm

The work of digging of pits, erection of Stay Clamp, Insulator etc.

Grouting of stays, 1:4:8 cc ratio (600x600x300mm.) as per RESPO norms.

Under Ground Laying of 33 KV XLPE Cable 3x300 sqmm in Single Circuit as per norms complete in all respect

Under Ground Laying of 11 KV XLPE Cable 3x120 sqmm in Single Circuit as per norms complete in all respect

Overhead Laying of 11 KV XLPE Cable 3x120 sqmm in Single Circuit as per norms complete in all respect

Filling of 33 KV Cable Jointing Kit complete in all respect

Filling of Cable Jointing Kit complete in all respect

Fixing Of 3 Phase Distribution Box Complete in all respect

Replacement of Damaged V-Type Cross Arm complete in all respect

Replacement of Damaged Pin Insulator with Pin complete in all respect

Replacement of Damaged Disc Insulator with gun fitting complete in all respect

Pipe Earthing of Transformer (By boring of 4 inch diameter 20 m deep, 40 mm diameter A class GI pipe is inserted to a depth of 20 m and a holed pipe of 1.5 m length is inserted at the bottom. Tighten one end of the MS strip of size 50x6mm with the nut bolt with the neutral of the converter and weld the other end with the GI pipe inserted in the boring for earthing. Putting a socket on the upper part of the pipe (mouth) so that water can be poured into it to retain moisture. To complete the work Contractor will provide all material, Manpower, T&P, safe carriage of material to worksite. Above work will be carried out under supervision of concerned JE/SDO/EE)

Gaurding at Road Crossing Complete in all respect

Supply and Fixing of Following Material as per RESPO norms complete in all respect (would be Provided by contractor through approved vendors of Discom at his own cost)

Holding Clamp

33 KV F Clamp

33 KV V-type cross Arm

F Clamp with Nut & Bolt

G I Pipe Dia 6"

Nut Bolt with washer

Piercieng Connector

Guarding Angle Clamp

Guarding Angle 65x65x6 mm

X Arm Clamp

MS Channel For Fuse Set

MS Channel Clamp For Fuset With Nut & Bolt

Safe back carriage of Following item (if any) from work site to C.B. Ganj store Bareilly approx distance upto 10-80 Km including loading & unloading.

Scrap

M/S SUPER ENGINEERING TRADERS