CONSTRUCTION FOR ONE STOP CENTER AT BAHADRABAD

Amount

Earth work in excavation in trenches for foundation and for pipes cables etc. in ordinary soil including fitup to 1.5m and dressing of sides and ramming bottoms and disposal of surplus excavated earth as directed by the engineer with in a lead of 50m. D.S.R.2.8.1

Providing and laying in position cement concrete 1:4:8 (1cement :4 coarse sand:08graded stone aggregated 40mm .nominal size.) excluding the cost of centering and shuttering - All work upto plinth level dsr 4.1.8

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).All works upto plinth level DSR 5.33.1

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).All works above plinth level upto floor V level DSR 5.33.2

Foundations, footings, bases of columns, etc. for mass concrete DSR 5.9.1

Columns, Pillars, Piers, Abutments, Posts and Struts DSR 5.9.6

Suspended floors, roofs, landings, balconies and access platform DSR 5.9.3

Weather shade, Chajjas, corbels etc., including edges etc DSR 5.9.19

Lintels, beams, plinth beams, girders, bressumers and cantilevers DSR 5.9.5

Staircse DSR 5.9.7

Reinforcement for R.C.C work including straighting,cutting,bending ,placing in position and bending all complete Thermo-Mechanically Treated bars.D.S.R.5.22.6

230 th Brick work with brick of class designation 75 in foundation & plinth in cement mortar 1:6 D.S.R.6.1.2

Brick work with F.P.S bricks of class 75 in super structure above structure above plinth level up to floor five level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand ) D.S.R.6.4.2

Half brick masonry with F.P.S bricks of class designation 75 in superstructure above plinth level up to floor five level in cement mortar 1:4 ( 1 cement : 4 coarse sand) D.S.R.6.13.2

Extra for providing and placing in position 2 Nos. 6mm dia. M.S.bars at every third course of half brick masonry (with F.P.S.bricks).D.S.R.6.15

Filling available excavated earth (excluding rock) in trenches ,plinth,sides of foundation etc . in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.D.S.R.2.25

Supply & Filling in plinth with sand under floors including watering, Ramming consolidating and dressing complete . D.S.R.2.27

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 sq.m cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth D.S.R.4.17

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)D.S.R.10.15.1

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws D.S.R.9.21.1

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size D.S.R.9.27.1.1.1

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)D.S.R.10.15.2

Providing & fixing of wire mesh (mosquito jalli) with labour & material comleteWith 12 mm mild steel U beading.D.S.R.9.51.

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete withFloat glass panes of thickness 4 mm D.S.R 10.30.1

Providing/fixing M.S. railing of riquired pattern in frames of windows etc. with M.S. flat, square or round bars etc. all complete D.S.R.9.48.1

15mm thick plaster on the plain in side of mix 1:6 ( 1 cement : 6 fine sand) mortarr D.S.R.13.1.2

12mm thick plaster on the plain in side of mix 1:6 ( 1 cement : 6 fine sand) mortar D.S.R.13.2.2

6mm thick cement plaster of ceiling of mix 1:3 ( 1 cement : 3 fine sand) mortar D.S.R.13.16.1

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.D.S.R. 13.80

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer.D.S.R 13.41.1

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)D.S.R.13.46.1

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable sq.m shade with ordinary paint of approved brand and manufacture.D.S.R.13.62.1

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm D.S.R.11.41.2

P/L Ceramic glazed floor tiles 300 x 300 mm of 1st quality conforming to I.S : 15622 of approved make in colours such as White , Ivory , Grey Fume, Red Brown laid on 20 mm thick cement mortar 1:4 including pointing the joints with white cement and matching pigment etc . complete.D.S.R.11.37

P/F 1st quality ceramic glazed wall tiles conforming to IS : 15622 of approved make in colours , shades except burgandy , bottel green , black of any sizes as approved by Engineer -in -Charge in skirting , risers of steps and dados over 12 mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. D.S.R.11.36

Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :Udaipur green marble 11.23.5 D.S.R.11.23.5 D.S.R.

Providing and fixing aluminium sliding door bolts, ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm D.S.R. 9.96.1

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete 100x10 mm D.S.R. 9.97.5

Providing and fixing chromium plated brass handles with necessary screws etc. complete:D.S.R. 9.92.3

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.D.S.R. 9.101.1

Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 610x510 mm bowl depth 200 mm D.S.R 17.10.1.1

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid D.S.R 17.3.1

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap D.S.R 17.7.2

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size D.S.R 17.1.1

Providing and fixing G.I. pipes complete with G.I. fittings andclamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall 15mm dia nominal bore D.S.R 18.10.1

Providing and fixing G.I. pipes complete with G.I. fittings andclamps, including cutting and making good the walls etc 25 mm dia. nominal bore D.S.R 18.10.3

Providing and fixing G.I. pipes complete with G.I. fittings 50 mm dia. nominal bore D.S.R 18.10.6

Providing and fixing ball valve (brass) of approved quality complete High or low pressure with plastic floats 25 mm dia. nominal bore D.S.R 18.18.1

Providing and fixing gun metal non- return valve of approved quality (screwed end) :25 mm nominal bore D.S.R 18.19.1

Providing and fixing uplasticised PVC connection pipe with brass unions :15mm nominal bore D.S.R 18.21.2.1

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.D.S.R 18.48

Providing and fixing soil, waste and vent pipes :Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 100MM D.S.R 17.35.1.

Providing and fixing soil, waste and vent pipes :Centrifugally cast (spun) iron socket & spigot (S&S) pipe 75MM D.S.R 17.35.2

Providing and fixing 100 mm plain bend of required degree.Sand cast iron S&S as per IS : 3989 D.S.R 17.39.1.2

Providing and fixing single equal plain invert branch of required degree :100x100x100 mm Sand cast iron S&S as per iron 1729 D.S.R 17.50.1.1

Providing and fixing 100 mm collar :Sand cast iron S&S as per IS - 3989 D.S.R 17.57.1.2

Providing and fixing 75 mm plain bend of required degree.Sand cast iron S&S as per IS - 3989 D.S.R 17.39.2.2

Sand cast iron S&S as per IS - 3989 75x75x75 mm D.S.R 17.50.2.2

Providing and fixing 100 single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :Sand cast iron S&S as per IS - 3989 D.S.R 17.47.1.2

Providing and fixing 600 x 455 mm. bevelled edge mirror of Saint Gobin or Modi float glass complete with 6 mm. thick hard board ground fix to wooden cleats with CP brass screws and washers etc. complete.D.R.S. 17.31

Providing and fixing terminal guard :Sand cast iron S&S as per IS - 3989 D.S.R. 17.56.1.2

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :Sand cast iron S&S as per IS - 3989 D.S.R 17.60.2.1

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron 100 mm dia pipes and fittings of diameter :D.S.R 17.58.1

Providing and fixing M.S. stays and clamps 100 mm dia for sand cast iron/ centrifugally cast (spun) iron pipes of diameter :D.S.R 17.59.1

Providing & Fixing C.P. brass bib cock parryware make D.S.R 18.15.1

Providing & Fixing C.P. brass Long boddy bib cock D.S.R 18.51.1

Providing & Fixing C.P. brass stop(conceald) D.S.R 18.52.1

Providing & Fixing C.P. brass angle valve D.S.R 18.53.1

Providing & fixing c.p. soap dish parryware make D.S.R 18.65

Provding & Fixing C.P Towel rail parryware make D.S.R 17.73.1

Provisiding & Fixing C.P Paper Holder parryware Make D.S.R 17.34.1

Providing & fixing Over Head Shower parryware make D.S.R 18.64

Cartage of material by mannual labour inculding loading ,unloading & stacking up to 50m D.S.R. 1.2.1

Providing units of reinforced cement concrte 1:1.5:3(1cement :1.5 coarse sand:3graded stone aggregate 20mm.nomnal size) of strength not less than M-150 in lintels and band over door and windows excluding supply of reinforcement and its bending including D.S.R. 5.2.2

40 mm. thick cement concrete flooring 1 :2 : 4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm. nominal size ) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.D.S.R. 11.3.1

15mm thick plaster on the rough side of mix 1:3 ( 1 cement : 6 fine sand )mortar.D.S.R. 13.2.2

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200mm D.S.R 23.3.3

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.D.S.R 23.2.1

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge. D.S.R 23.7

Providing & fixing of R.C.C manhole covering tank (600 x 600)D.S.R. 19.19.1.1

Providing & fixing of foot rest in tank D.S.R. 19.17.1

M/S PREETAM SHARMA

Subodh Kumar