Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.7 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹33.7 L+₹4.4 L (15.2%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest | |
| 3 | L3₹34.9 L+₹5.6 L (19.2%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest | |
| 4 | L4₹35.5 L+₹6.3 L (21.4%)Rejected-AOC ALSAFA COLONY SOPORE SOPORE ALSAFA COLONY 193201 SOPORE BARAMULLA JAMMU KASHMIR 193201 | BARAMULLA | JAMMU AND KASHMIR | 193201 | L4 | Rejected-AOC Other than Lowest | |
| 5 | L5₹36.1 L+₹6.9 L (23.5%)Rejected-AOC USHKARABALA BARAMULLA 193101 J K | BARAMULLA | BARAMULLA | JAMMU AND KASHMIR | 193101 | L5 | Rejected-AOC Other than Lowest |
Tender Value
₹31 L
EMD Value
₹62,000
Closing Date
25 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 969 EWS
GE 969 EWS C/O 56 APO
SPL REPAIR TO BLDG NO SP-28(COOK HOUSE) AND SP-132A (COOK HOUSE AND DINNING HALL) AT BARAMULLA UNDER GE 969 EWS
2023_MES_616169_1
CA NO 969 WS - /2023-24
Open Tender
Civil Works
Item Rate
180 days
BARAMULLA
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE 969 EWS
₹62,000
Yes
25 Oct 2023
29 Aug 2023
27 Sept 2023
29 Aug 2023
25 Sept 2023
12 Sept 2023
Amount
Taking down carefully copper aluminum point wiring (light. Fan, socket or power complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc.
M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuityconductor.Complete all as specified and directed by Engineer-In-Charge.
(a) One light point/fan point/Ex fan point controlled by one 5 Amps switch one way
(b) One 3 pin 5 Amp switch socket outlet on independent board.
(c) 3 pin 5 Amp switch socket outlet on same board with accessories.
M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor, complete all as specified and directed by Engineer-In-Charge.
S&F in repair switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and directed.
S&F in repair Socket outlet 2 in 1, 3 pin, 5 Amps, complete all as specified and as directed.
S&F in repair Switch socket combination 2 in1, 3 pin,5 and 15 Amp flush type, universal complete all as specified and directed by Engineer-In-Charge.
S&F in repair switch piano Flush type, single pole, 15 amp 240 volts, complete all as specified and directed.
S&F in repair Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, complete all as specified and as directed.
S&F in repairs stepped type electronic fan regulator for ceiling fan 1200/1400mm size,230 volts,6 Amps complete all as specified and as directed.
S&F Ceiling rose, 3 terminal /PVC/ polycarbonate, isolated body complete all as specified and as directed.
S&F in repairs Lamp Holder, PVCI Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.
Supply and fix in repair LED Lamp 10W.
S&F in repair Decorative ultra slim square profile LED Iighting fixture 1x20 watt with extruded polycarbonate, environmental friendly, energy efficient, all as directed by Engr - in -Charge. Havells Cat part No EXACP7UN1WO20 or equivalent in Bajaj or CG
S&F in repair LED Mirror Light 10 W, Decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient ready to use pack. suitable for surface mounting on a ceiling or wall complete all as specified and as directed. Havells Cat part No LHEXACP5IN1WO10 or equivalent in Bajaj or CG
S&F in repair ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs 6.5W LED Complete all as specified and as directed. Havells Cat part No LHEXCGP7IN5WO06 or equivalent in Bajaj or CG
Supply and fix in repair exhaust fan made of sturdy Engineeing plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 150 mm complete all as specified and as directed by Engr-in-Charge.
Supply and fix in repair exhaust fan made of sturdy Engineeing plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mm complete all as specified and as directed by Engr-in-Charge.
Supply and fix in repair exhaust fan made of sturdy Engineeing plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed by Engr-in-Charge.
S&F ceiling fans complete with blades, down rods, electronic regulator and accessories 230V, 1200mm sweep Min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) all as specified and as directed.
Supply and fix exhaust fan, steel body AC single Phase, 230 V of size 450mm sweep with blades, and frame and louvers, copper winding of sweep 150/200/250mm complete all as specified and as directed.
S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used TPN 4 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.
S&F in repairs Double door metallic sheet metal enclosure for DB when MCBS to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBS of cables/wires all as directed.
S&F in repairs Double door metallic sheet metal enclosure for DB when MCBS to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBS of cables/wires all as directed.
S&F in repairs MCB TPN 63 amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning complete all as specified and as directed.
Supply and fixing in repair 415V 10KA 'B' curve miniature circuit breaker (MCB) Four Pole of |capacity 100A and current carrying capacity in the DB complete with connection testing and commissioning.
S & F in repairs MCB SPN 40 to 63 amp rating 240V, 10KA 'C curve complete with connection testing and commissioning complete all as specified and as directed.
S & F in repair MCB SP 6 to 32 Amps, 240 Volts, C Curve complete all as specified and as directed.
M & L sub main wiring with two run single core 4 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 4 sqmm and one run of 4 sqmm cable and one run of casing capping shall be measured as one RM
M & L sub main wiring with two run single core 10 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 10 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 10 sqmm main wire and one run of 10 sqmm as earth wire and one run of casing capping shall be measured as one RM
Supply and fix in repair, install and testing ISI marked, metalic body, energy efficient, water heater storage type, copper tank, electgrically operated, single phase, 50 Hz (5 star rating), complete of 25 Ltr capacity with and including supply and fixing, wire armoured 45Omm long. 15 mm dia brass coupler etc, flexible pipe suitable to withstand upto 100 degree celcius for hot and cold water, Anchor fastner - 04 Nos of suitable size, 3 core PVC insulated, FRLS multistranded copper conductor cable and plug top 15 Amps capacity complete in all respect and all as specified and directed by Engr-in-Charge. Old geyser deposited to MES store yard
Supply and fix in repair, install and testing ISI marked, metalic body, energy efficient, water heater storage type, copper tank, electgrically operated, single phase, 50 Hz (5 star rating), complete of 50 Ltr capacity with and including supply and fixing, wire armoured 45Omm long. 15 mm dia brass coupler etc, flexible pipe suitable to withstand upto 100 degree celcius for hot and cold water, Anchor fastner - 04 Nos of suitable size, 3 core PVC insulated, FRLS multistranded copper conductor cable and plug top 15 Amps capacity complete in all respect and all as specified and directed by Engr-in-Charge. Old geyser deposited to MES store yard
M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of charcoal, salt & necessary earth work as Excavation, RF and removal etc."
Supply, installation, testing and commissioning in repair Electric operated chimney heavy duty with following specification : (a) Dry Heat Auto Clean Technology (b) New Artful Design (c) Matt Black Finish/Stainless Steel Finish (d) Backlit Front Glass with Premium Brushed Silver Finish (e) Thermostatic Touch Control (f) Heavy Duty Baffle Filters (g) Optimal Airborne Grease Control Zone (h) Metal Blower + Metal Housing (i) Designed Max Airflow (upto) 1000 Nm3/h
Supply ,Laying ,connecting/ Jointing,charging, testing and commissioning LT cable electric, XLPE insulated, armoured, PVC sheathed, heavy duty, electric cable 1100 Volt grade with stranded aluminum conductor conforming to IS :7098, laid in trenches/ducts/fixed to wall /roofs/ poles all as specified of size 3.5 Core 95 sq mm including Taking out old unservicable cable from any space
Excavation in trenches not exceeding 1.5 m wide & not exceeding 1.5 mtr deep in depth for laying of cable and foundation of poles, stays and getting out in any type of soil complete all as specified and as directed.
Removing surplus excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point all as directed.
Returning, filing in, excavated soil including spreading. leveling, watering & well ramming in layers n. exc 25 cm thick all as directed.
M&L for sand cushioning in trenches for cable protection including consolidation complete all as directed.
M&L for Sub class "B" bricks laid dry width wise across the line of cable in trenchs as cable protection complete all as specified and directed.
S&F GI Tubing light grade 40mm dia with all fitting: laid in trenches all as specified and as directed.
Dismantling of plain or corrugated steel sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof covering complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating Gl based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed self tapping screws as specified.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed self tapping screws as specified.
Dismantling wall and ceilling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, cover fillets etc
M&L 4 mm thick veneered decoretive, Plywood grade 1 (BWR resin) with decoretive face veneers on one faces, fixed with nails to timber frame work on ceiling.
M&L 4 mm thick veneered decoretive, Plywood grade 1 (BWR resin) with decoretive face veneers on one faces, fixed with nails to timber frame work on wall.
Dismantling of timber scantling 40 Sqcm and over in section in any position in unframed work.
M&L for second class soft wood (Kail) clean swan timber fixed in scantling.
All as per Ser item No 48 above but except timber complete all as specified and directed. (Note : Serviceable timber obtained from ser item No 47 above to be used).
Dismantling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed work, complete all as specified and as directed.
S&F second class hardwood plain fillets square, rectangular.in section exc 13 Sqcm & not ex 125 Sqcm complete all as specified and as directed.
S&F second class hardwood plain fillets square, rectangular in section exc 6 Sqcm and not exc 13 Sqcm complete all as specified and as directed.
Dismanting of boarding any description fixed in any position with nails, complete all as specified and as directed.
M&L, for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps complete all as specified and as directed.
All as per Ser item No 54 above but except boarding complete all as specified and directed. (Note : Serviceable boarding obtained from ser item No 50 here-in-before to be used).
S&F facia boarding of 2nd class soft wood planed one side with but joints 20mm thick and champhered one side and the boarding is matched, complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of GE 410 (Gde-E-250 quality-A), complete all as specified and as directed.
Demolition of cement concrete in ground floors and pavingsn exc 15 cm thickness (below or above ground level), complete all as specified and as directed.
M&L for PCC 1:3:6 type C-2 in foundations, filling and mass concrete, complete all as specified and as directed.
M&L for Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for 25mm thick PCC 1:2:4 type B-O (using 12.5 graded aggregate) as in floors finished even and fair, complete all as specified and as directed.
M&L Vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floor etc, Incl screed bed 15 mm thick in CM (1:6) complete all as specified and as directed.
S&F coloured non skid ceramic tiles 300×300x7 thick, in flors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to mnatch Incl screed bed 15 mm thick in CM (1:6) complete all as specified and directed.
M&L for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and as directed.
M&L for Kota stone slabs, 20mm to 25mm thick, machine cut as in flooring of size not less than 0.25 Square metre each, set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab laid over & including screed bed of 15 mm thick in cement mortar (1:4) including rubbing, cutting and polishing (mirror type), complete all as specified and as directed.
M&L Chequred coloured tile size 300x300x25mm using table vibrator or equivlent as in jointed and pointed in neat cement slurry over and included 15mm screed cement mortar (1:6) and pigment size conforming complete all as specified and as directed.
S&F glazed ceramic coloured tiles in verticles surfaces of size 600x300x7/9, 450x300x7mm mm thick set and jointed in neat cement slurryy and pointed white or coloured cement to match tile surtace over and including 10 mm thick plaster in cement andsand mortar 1:4, complete all as specified and as directed.
M&L 20 mm thick granite polished in wash basin counter and fixed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.
Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and as directed.
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames), complete all as specified and as directed.
S&F Anodised aluminium Powder Coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat forfizing etc. complete all as specified and as directed.
S&F Anodised aluminium Powder Coated (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, arnodised aluminum snap beading screws etc. complete all as specified and as directed.
S&F Anodised aluminium Powder Coated (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminiun sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.
S&F aluminium extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and as directed.
S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and as directed.
S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubberl neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge
S&F 9mm thick Prelaminated particle board, interior grade, prelaminated two side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame work,complete all as specified and directed.
S&F Sheet glass ordinary quality & glazing 4.8mm thick fixed to aluminium frame work, complete all as specified and as directed.
S&F 2nd Class Soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete all as specified and as directed.
S&F 2nd class soft wood 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated, complete all as specified and as directed.
S&F 35 mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats, complete all as specified and as directed.
S&F 2nd class 30 mm thick soft wood (Kail) glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats size of members of shutters as specified in SSR Part- I section 8 Clause 8.23 (b) for windows, ventilators etc are provided with stiles and rails, complete all as specified and as directed.
MS Cold rolled Butt hinges medium weight 100 mm long complete all as specified and as directed.
MS Cold rolled Butt hinges medium weight 75 mm long complete all as specified and as directed.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and as directed.
S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F 200mm long Anodised Aluminium tower bolt, complete all as specified and as directed.
S&F 100mm long Anodised Aluminium tower bolt, complete all as specified and as directed.
S&F 150mm long extruded aluminium alloy handle
S&F 100mm long extruded aluminium alloy handle
S&F galvanised mild steel wire cloth 0.46 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple, complete all as specified and as directed.
S&F Sheet glass ordinary quality & glazing with oil putty in square n-exc. 0.5 sqm in each 3mm pane thick complete all as specified and as directed.
M&L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden or wood based surfaces over 10cm width or girth etc complete all as specified and as directed.
S&F in repairs curtain rails , anodised aluminium alloy with fixing brackets, stops, rollers etc, complete all as specified and as directed.
S&F for Aluminium anodised Brackets fixed in repair complete all as specified and directed.
Demolition of brick work, PCC block masonary, stone masonary or boulder masonry built in cement mortar, complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks (Old size) straight or curved on plan mtr mean radius exceeding 6 built in CM 1:6, complete all as specified and as directed.
M&L brick work with sub lass 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4, complete all as specified and as directed.
M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and as directed.
M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, complete all as specified and as directed.
M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and as directed.
M&L for preparation of new surfaces of wals and applying two Coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint, complete all as specified and as directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint, white or tinted, complete all as specified and as directed.
M&L for preparation of old treated surface of brick/stone work, concrete plastered or unplastered surface and applying one coat of cement base paint on walls, complete all as specified and as directed.
All as per item No. 106 above but one coat of oil bound distemper on walls complete all as specified and as directed.
Demolition of reinforced Concrete of any description and in any position not othewise specifically provided for, complete all as specified and as directed.
M&L formwork to soffits of suspended slabs such as roof slab n.exc 200mm thick, complete all as specified and as directed.
M&L RCC type B-0, 1:2:4 (125.mm graded aggregate) for Slabs supported on walls, beams. and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed.
M&L RCC type B-0, 1:2:4 (125 mm graded aggregate) for beams, cantilevers, bressumm ers, lintels over 1.5m span, complete all as specified and as directed.
M&L formwork to edges of concrete flats, treads, floor and roofs n.exc 20 cm wide, complete all as specified and as directed.
M&L for mild steel TMT Bars 10 mm dia and over, guality, cut to length, bent to shape required idniac uding cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm, complete all as specified and as directed.
All as per item No.113 before in here but 5mm dia and over utp to 10mm dia in stirrups, Spacers and binders, complete all as specified and as directed.
M&L precast RCC man holes cover in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate Providing precast ce- ment concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajas, water troughs, mangers, shelves and similar articles with plain faces, complete all as specified and as directed.
S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm bore, complete all as specified and as directed.
S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors for 75 mm bore pipe, complete all as specified and as directed.
S&F for PVC (SWR) bend with acoess door inluding jointing with solvent cement 75 mm bore, complete all as specified and as directed.
Removal of existing water tank and S&F 1000 Itr capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all all as specified in SSR part -I.
Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed.
M&L for GI tubing medium grade galvanised with all fittings complete to wall, ceilings or laid on roof top all as specified and directed for 15 mm bore, complete all as specified and as directed.
S&F vitreous China Wash Basin white, flat back size 550x400 mm including bracket, waste coupling, waste pipe complete all as specified and as directed.
S&F towel rail 450mm long of PTMT fixed with and including choromium plated brass screw and wooden/ plastic cleats (minimum weight 170 gms).
S&F 15 mm dia pillar tap fancy type with capstan heads CP screwed down high pressure with or with out lettered 'Hot or 'Cold' with long screw shank fly nuts screwed shanks and fly-nuts screwed for iron pipe and fixed.
S&F PVC connection 15 mm size with PTMT nuts of length 600 mm, complete all as specified and as directed.
S&F 15mm dia angle stop valve of CP any colour fixed. high pressure screwed for for iron pipe, complete all as specified and as directed.
S&F gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia, complete all as specified and as directed.
S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & plastic high density ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m -210g ms.25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed.
S&F 15mm bore Bib taps, cast copper alloy, with crutch or butterfly handle screwed down for iron pipe, complete all as specified and as directed.
M&L for 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work, complete all as specified and as directed.
M&L Non skid ceramic tiles 7 to 8 mm thick coloured(square/rectangular) polished, area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm. in floors set and jointed in neat cement slurry of 15mm thick in CM 1:6 and pointed out in white or coloured cement to match complete all as specified and as directed.
M&L granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including complete all as specified and as directed.
M&L for preparation of old treated surface of wood and wood base surface of any description not otherwise, described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Note:- Schedule of credit Rs.1,52,870.30 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.
M/S GHULAM RASOOL LONE AND SONS
Javeed And Co
M/S GHULAM NABI KHUROO AND CO
M/s ABDUL QAYOOM LONE & BROS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .