Loading…
Loading…
Tender Value
₹1.5 Cr
EMD Value
₹2.3 L
Closing Date
24 Jul 2026, 10:30 pmClosed
Karnataka Neeravari Nigam Limited
KIRAN PADTI
Heightening/Modification of Towers of 220KV Varahi Kemar Line-3 along with 110KV line between location No.112-114 as per the request of Karnataka Neeravari Nigam Limited (KNNL) for the construction of Overhead aqueduct structure near Shriooru village, coming under TLM section Hiriyadka of TL & SS Division, Karkala, Udupi District
KNNL/2026-27/EL/WORK_INDENT4587/CALL-2
KNNL/2026-27/EL/WORK_INDENT4587/CALL-2
Open
Electrical
Two Tender Document System(Two Cover)
KNNL Division Varahi Project Div No 2 Siddapura
9 documents required · 9 mandatory
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
The intending bidder should have satisfactorily completed (at least 90% of the contract value) as a prime contractor at least one similar nature of work i.e the work of replacement of towers in 220 kV or above OR Should have successfully completed construction of 220kV or above Transmission Line (at least 01 Kmtr) or above voltage of value not less than 50% of the estimate value of amount put to tender i.e., Rs.89.00 lakhs in last five years i.e., from 2021-22 to 2025-26.. The Work done certificates obtained from the officer not below rank of Executive Engineer should be uploaded. The work done value of the previous year shall be updated to present price level of 2026-27 at 10% per annum.
The intending bidder should have executed following minimum quantity of items in any one financial year in previous 5 financial years (i.e., from 2021-22 to 2025-26) for which the necessary certificates issued by officers not below the rank of Executive Engineer, shall be uploaded. 1. Erection of Towers 2 nos and 2.Supply and laying of Conductor 9.0km.
A Copy of Super Grade Electrical Contractor License Certificate
A copy of the valid Employees Provident Fund (EPF) registration Certificate.
Each tenderer must pay specified full E.M.D. in the e-procurement platform through any of the payment modes as:- a) Credit card b) Direct Debit c)National Electronic fund transfer (NEFT) d)Over the counter (OTC). Tenders without valid E.M.D. shall be rejected.
GST Registration Certificate
The annual turnover of intending bidder shall not be less than the two times the amount put to tender i.e., Rs.3.55 crores in any two financial years during the last 5 years i.e, from 2021-22 to 2025-26. (in all Classes of Civil Engineering Construction works only). The audit Profit and Loss account certified by a practicing Chartered Accountant duly showing with UDIN i.e (Unique Document Identification Number) along with income tax return should be uploaded. The turnover of previous years will be updated to the present value of the year 2026-27 giving weightage of 10% for each previous year turnover value.
Liquid assets and or availability of credit facilities of not less than Rs.53.35lakhs (Credit Lines/Letters of Credit/Certificates from Nationalised Banks) for meeting the fund requirement etc., The Contractor should upload necessary documents issued by the Nationalised banks as per prescribed formats enclosed as annexure-I to the Notification.
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity equal to (AxNx1.5- B), Where A equal to Maximum value of civil engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N equal to Number of years prescribed for completion of the works for which tenders are invited. B equal to Value, at 2026-27price level, of existing commitments and ongoing works to be completed during the next 6 months. Note: The statements showing the value of existing commitments and ongoing works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
₹3,770
₹2.3 L
13 Jul 2026
13 Jul 2026
27 Jul 2026
20 Jul 2026
20 Jul 2026
Heightening/Modification of Towers of 220KV Varahi Kemar Line-3 along with 110KV line between location No.112-114 as per the request of Karnataka Neeravari Nigam Limited (KNNL) for the construction of Overhead aqueduct structure near Shriooru village, coming under TLM section Hiriyadka of TL & SS Division, Karkala, Udupi District
Part-A: Material Portion: Supplying of 220KV DC Towers M/s L & T Design (Gadag-Bagalkot line):- Supplying of 220KV DC Towers M/s L & T Design-DB+6' Type Tower (For T.No. 112) :- Fabrication, galvanisi...
Supplying of 220KV DC Towers M/s L & T Design-DB+6' Type Tower (For T.No. 112):Fabrication, galvanising and supply of mild steel tower materials.
Supplying of 220KV DC Towers M/s L & T Design-DD'+15 TypeTower :- Fabrication, galvanising and supply of High Tensile steel tower materials.
Supplying of 220KV DC Towers M/s L & T Design-DD'+15 Type Tower :-Fabrication, galvanising and supply of mild steel tower materials.
Supplying of 220KV DC Towers M/s L & T Design-DD'+0 TypeTower (For T.No. 114): Fabrication, galvanising and supply of High Tensile steel tower materials.
Supplying of 220KV DC Towers M/s L & T Design-DD'+0 TypeTower (For T.No. 114): Fabrication, galvanising and supply of mild steel tower materials.
Supplying of 220KV DC Towers M/s L & T Design-DD'+0 TypeTower-Supply of Galvanised Bolts, Nuts and Washers.
Supplying of 220KV DC Towers M/s L & T Design-Supply of Tower Accessories: Phase Plate (set of 6 no's per tower)
Supplying of 220KV DC Towers M/s L & T Design-Supply of Tower Accessories:Number Plate.
Supplying of 220KV DC Towers M/s L & T Design-Supply of Tower Accessories:Circuit Plate.
Supplying of 220KV DC Towers M/s L & T Design-Supply of Tower Accessories: Danger Board.
Grounding of towers :-
i) Supplying cast iron pipe of 100mm ID 13mm thickness, 2.75mtrs long with 2 part clamp out of G.I.Flat 50x6 mm continuously welded around the pipe using cast iron welding elec...
Supply of Conductors and Earth Wire : AAAC Moose conductor
Supply of Conductors and Earth Wire :-24/48 Fibre (DWSM) OPGW (Optical Ground Wire) fibre optic cable (with 1.5% sag)
Supply of Hardware for AAAC Moose Single tension clamp with arcing horns and hardware materials.
Supply of Hardware for AAAC Moose : Double tension clamp with arcing horns and hardware materials.
Supply of Hardware for AAAC Moose :Single Suspension clamp with arcing horns with hardware materials.
Supply of Hardware for AAAC Moose : Double Suspension clamp with arcing horns with hardware materials.
Supply of Hardware for AAAC Moose : Mid Span Compression joints for AAAC Moose conductor. (Approx)
Supply of Hardware for AAAC Moose : Pre-formed Armour Rods
Supply of Hardware for AAAC Moose : Repair sleeves for AAAC Moose conductor.(Approx.)
Supply of Hardware for AAAC Moose : Vibration Dampers.(1 per each side of Conductor)
Supply of Hardware for AAAC Moose : C Type wedge connectors Moose to Moose conductor
Supply of Insulators: 220kV Polymer disc insulator (Tension & Suspension type insulators)
Supply of Hardware and Accessories for Optical Ground wire: Suspension Clamp Assembly for 24/48 Fibre OPGW. For T.No.109,110 & 111
Supply of Hardware and Accessories for Optical Ground wire: Tension Assembly for Dead End for 24/48Fibre OPGW. For T.No.112,113 & 114
Supply of Hardware and Accessories for Optical Ground wire: Tension Fitting Assembly for 24/48 Fibre OPGW including all accessories for joint box (splicing location) For T.No.108 & 115
Supply of Hardware and Accessories for Optical Ground wire: Vibration damper for 24/48 fibre OPGW. For T. No. 109,110,111,112,113,114=2*6=12no.s and T.No.108 & 115=1*2=2no.s
Supply of Hardware and Accessories for Optical Ground wire: Down lead clamp assembly for fibre OPGW. (Approx) For T.N. 108 & 115
Supply of Hardware and Accessories for Optical Ground wire: Joint Box for 24/48 Fibre OPGW For T.N. 108 & 115
Part-B: Erection Portion:Check survey by using their own equipment. b/w Loc no.108-115 (for Erection portion)
Erection of 220kV DC Towers: Sorting of tower parts made up of fabricated angle iron.
Erection of 220kV DC Towers: Setting up of stubs templates and aligning dismantling and transportatioin of templates from one location to another location.
Erection of 220kV DC Towers: Assembling & erection of towers including tightening of bolt and nuts & including loading, unloading at store & site
Erection of 220kV DC Towers: Welding of bolts and nuts.
Anti climbing devices: Supplying & fixing G.I. Angles 45X45X5mm, 1 mtr length with cleats, bolts & nuts as per specification and fixing above 0.5mtrs length each at inner and outer surface of tower to...
Anti climbing devices: Supplying & fixing of barbed wire as per specification.
Erection of fixing of Tower Accessories: Danger Board.
Erection of fixing of Tower Accessories: Number Plates.
Erection of fixing of Tower Accessories: Phase plate ( set of 3 nos).
Erection of fixing of Tower Accessories: Circuit Plate.
Stringing of Conductor and Ground Wire:-Stringing of conductor without allowing conductor to touch the ground and without damaging the conductor in Hilly Terrain using AAAC Moose conductor.
Stringing of Conductor and Ground Wire:- Stringing of Ground wire in Hilly Terrain as above. b/w Loc no. 108-115
Grounding of towers :-Labour portion for Grounding of Tower/Equipments by providing Cast Iron pipe of 100mm thickness 2.75m long with 2 part clamp out G I flat 50 x 6mm continuously welded around the ...
Releasing and restringing of HT/LT lines crossing below EHT lines.
a) Between T.No. 110 -111 = 3 wire HT X 4 span X 50 mtr span = 600 mtr = 0.6 km.
b) Between T.No. 111-112 = 4 wire LT X 4 span X 50 ...
Loading and unloading of Conductor, Ground wire and Insulators at agency store & site. a) AAAC Moose conductor
For each 01 km = 1.771 MT (approx), Hence total weight of 11.4 km AAAC moose conductor is...
Part-C: Dismantling of Existing Moose Conductor and Ground Wire. Dismantling of towers: Dismantling of 220KV RPG design, DC ‘A+0’ Mtr GI towers (01 no of ‘A’ type tower)
Dismantling of towers: Dismantling of 220KV RPG design, DC ‘A+6’ Mtr GI towers (01 no of ‘A+6' type towers)
Dismantling of towers: Dismantling of 220KV RPG design , DC 'C+0' Mtr GI towers (01 no of 'C+0' type towers)
Releasing of AAAC Moose conductor: Releasing of AAAC Moose conductor without allowing conductor to touch the ground and without damaging the conductor in Hilly Terrain.
Releasing of Ground wire: Releasing of Ground wire in Hilly Terrain as above b/w Loc no. 108-115
Loading and Unloading of Conductor, Ground wire and Insulators
a) AAAC Moose conductor
For each 01 km = 1.771 MT (approx), Hence total weight of 11.4 km AAAC moose conductor is = 20.18.
Less 10 % of ...
Part-D: Civil Works:Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...
Providing and laying in position Cement Concrete for all Foundation works. The granity/basalt crushed graded coarse aggregates and fine aggregaes as per relevant IS codes machine mixed with super plas...
Providing and laying in position Cement Concrete for all Foundation works. The granity/basalt crushed graded coarse aggregates and fine aggregaes as per relevant IS codes machine mixed with super plas...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid Document Kemar Line.docx
Tender Document • 12.74 MB
annexure-1 bankers certificate.docx
Instructions to Tenderers • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .