Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹198.8 Cr
EMD Value
₹2.0 Cr
Closing Date
8 Aug 2024, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Neeravari Nigam Limited
M H Totager
KADARKOPPA LIFT IRRIGATION SCHEME Survey, Investigation, Design, Supply, Installation, Testing and Commissioning of Lift Irrigation System (Head Works consisting of construction of Intake Canal, Jack well cum pump house, Vertical Turbine pumps coupled to HT Motors, Power supply including terminal bay, 110 KV Electrical Sub Station, Transmission line, Rising Main and Delivery Chamber) for providing irrigation facility to suffering command from Palkimani Direct Minor to Hanumaneri distributary of GRBC covering an ICA of 8750 Ha in Mudhol, Badami and Bagalkot taluk, Bagalkot District by lifting water from Ghataprabha River near Udagatti Village including Operation and Maintenance for a period of 5 years after successful commissioning of work for KADARKOPPA LIFT IRRIGATION SCHEME on Turn-Key Basis.
KNNL/2024-25/LI/WORK_INDENT1124
KNNL/2024-25/LI/WORK_INDENT1124
Open
Lift Irrigation Scheme
Two Tender Document System(Two Cover)
KNNL Division MBC Div Gaddanakeri
25 documents required · 25 mandatory
Each tenderer in his or her name should have achieved in the last five years 2019-20 to 2023-24 should have satisfactorily completed or completed at least 90 percent of contract value if work is ongoing as a prime contractor, at least one lift irrigation scheme of value not less than Rs.99.40 crores. i. e usually not less than 50 percent estimated value of contract. Work done certificate issued by an officer not below the rank of EE of the concerned division and countersigned by the SE of the concerned circle is to be uploaded for the technical bid. The cost of completed works of the previous year shall be given a weightage of 10 percent per year to bring it to the price level of financial year in which tenders are invited.
The intending Bidder i. e Individual or JV or Tie-up partner should have supplied and successfully commissioned at least 4 numbers of VT pumps with a capacity or flow rate not less than 1.00 cumecs for each pump with a head not less than 100 mtrs for each pump during the last 5 years i.e., from 2019-20 to 2023-24. The necessary work done certificate issued by an officer not below the rank of Executive Engineer and countersigned by the Superintending Engineer of the same circle should be uploaded.
The intending bidder i.e Individual or JV should have supplied, erected, tested, completed and commissioned MS pipes not less than 1000 mm inner diameter for a length of at least 9.00 kms in any one year during last 5 years i.e., from 2019-20 to 2023-24. The work done certificate should be obtained from a competent authority not below the rank of EE of the concerned division and countersigned by the SE of the concerned circle.
The intending Bidder i.e Individual or JV should have executed in any one year, the following minimum quantities of work usually 80 percent of the peak annual rate of construction during the last 5 years i.e., from 2019-20 to 2023-24. The necessary work done certificate issued by an officer not below the rank of Executive Engineer and countersigned by the Superintending Engineer of the same circle should be uploaded. A. Earthwork Excavation of 84750 cum, B. Reinforced Cement Concrete of 5560 cum, C. TMT STeel of 670 Tonne
Each Tenderer should further demonstrate Availability of the required or specified key and critical equipment for this work with the relevant documents like commitment agreements etc. for availability for this work are furnished. The following key and critical equipment for the work. Tipper-4 , 2 own 2 lease, Excavators-2, 1 own 1 lease, Mobile Crane-2, 1 own 1 lease, Water tanker-2, 1 own 1 lease and Self loading Concrete mixers- 2, 1 own 1 lease.
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity as AXNX1.5 - B
Annual turnover should not be less than Rs. 265.10 crores in any of the 2 FY during 19-20 to 23-24. In case of JV all partners combined satisfy the annual turnover. Lead partner should have at least 51 percent of Turnover in any of the Two yrs during the last 5 yrs. Audited P and L account certified by a practicing CA with the copy of ITR filed for the years indicated above should be furnished mentioning UDIN on TO certif. from CA. TO cert. without UDIN will not be considered.
Liquid asset and/or availability of credit facilities of not less than Rs. 49.70 crores unconditional credit lines/letters of credits/certificates from nationalized/scheduled banks for meeting the fund requirement etc. The contractor should upload necessary documents issued by the nationalized/scheduled banks as per prescribed format enclosed in section 3 .valid for six months. Further the agency has to furnish the above credit facilities for the entire work period as per tender.
The number of JVs shall not exceed 3. All the partners should have achieved in at least two financial years 25 percent of prescribed annual turnover as in Qualification criteria in the last 5 years i.e., 2019-20 to 2023-24. The lead partner should have at least 51% partnership
In case of JV all the partner are jointly and severely responsible for successful performance of the contract The lead partner shall enter in to a joint venture agreement on stamp Paper in the prescribed format which shall be concluded prior to bidding and enclosed to the bid document and submit along with the request for bid document. The stamp duty amount for Joint Venture or Tie-up etc. should be according to prevailing rules.
The qualification criteria can be satisfied by Individually or Joint Venture by adding collectively the credentials of all JV partners. All the partners should have achieved at least 25 percent of prescribed annual turnover in the last five years i. e. 2019-20 to 2023-24. However the lead partner should have at least 51 percent partnership.
The intending bidder can submit bids as an Individual or Joint Venture bidder along with Tie up of pump manufacturer. The Tie up is to be formed prior to the bidding.Tenders from a Tie up proposed in this bid, the bidder shall upload an agreement with only one pump manufacturer on stamp paper in the prescribed format which shall be concluded prior to bidding and enclosed to the bid document. For proof of the Tie up, in the Technical bid, the prescribed format under section 11 Annexure II shall be followed. multiple tie up not allowed. The pump manufacturer shall not enter into a Tie up with more than one bidder. The stamp duty amount for Joint Venture or Tie-up etc. should be according to prevailing rules.
The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in-charge, not below the rank of an Executive Engineer or equivalent.
₹7,500
₹2.0 Cr
6 Jul 2024
6 Jul 2024
12 Aug 2024
22 Jul 2024
22 Jul 2024
Kadararakoppa LIS Annexure 7.1 Pumping Machinery & Annexure 7.2 Pump House Lighting
Design, manufacture, supply, erection, trail running, performance testing and commissioning of vertical turbine pump of approved make conforming to IS: 1710 having specified pump output under specifie...
Providing and fixing of DI Double flanged wafer type (Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel...
Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...
Supply, install, test & Commissioning Metallic dismantalling joint 830 mm Dia, PN 1.6 rating of approved make 800mm diameter Market Rate
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) delivery pipes of specified...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded /submerged arc welded mild steel (Fe-410 grade) manifold pipe system of specif...
Design, fabrication, supply, erection, testing and commissioning EOT crane consisting of double girder box type construction, rail mounted end carraiges with long and cross travel arrangement, main an...
Supplying, installing and commissioning electrode actuated water level transmitter of approved make with all accessoreis to protect against dry running of pump. Item No.7.13 Page No 93 of CSR 2023-24 ...
Design, fabrication, supply, assembling, testing and commissioning of HT pump panel board made of sheet metal duly painted with recess for cable entries at bottom suitable for 6.6 KV equipped with vac...
Supply, installation and commissioning of soft starter for specified kW load operating at 6.6 KV with load break switch, metering, protection by-pass vaccum contactor with all accessories complete hou...
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...
Supply and installation of floor mounting type LTAC panel of approved make fabricated from sheet metal and painted with provision for suitable incoming and specified number of outgoing feeder inlets w...
Battery Set and charger: Supply and Installing of 110 V,100AH of 2 No's Plant Battery Set and 2 No's Battery's Charger including control panels, change over arrangement etc., complete along with 1 No ...
Battery Set and charger: Supply and Installing of 110 V,100AH of 2 No's Plant Battery Set and 2 No's Battery's Charger including control panels, change over arrangement etc., complete along with 1 No ...
Battery Set and charger: Supply and Installing of 110 V,100AH of 2 No's Plant Battery Set and 2 No's Battery's Charger including control panels, change over arrangement etc., complete along with 1 No ...
Supplying of 1.1 KV Class Armoured Aluminium / copper conductor PVC insulated, extruded inner sheathed,galvanised,steel strip with glands/lugs/ferrules Item No 32.03 Page No 40 of CSR 2023-24 Vol-6 K...
Supplying of 1.1 KV Class Armoured Aluminium / copper conductor PVC insulated, extruded inner sheathed,galvanised,steel strip with glands/lugs/ferrules Item No 32.03 Page No 40 of CSR 2023-24 Vol-6 K...
Supplying of 1.1 KV Class Armoured Aluminium / copper conductor PVC insulated, extruded inner sheathed,galvanised,steel strip with glands/lugs/ferrules Item No 32.03 Page No 40 of CSR 2023-24 Vol-6 K...
Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...
Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...
Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...
Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...
Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...
Supplying, laying and connecting xLPE 6.6 KV(E) 3 core cable suitable for 28 KA short circuit rating with end connecters from HT panel to motor, starters, capacitor panels etc., complete as per direct...
Supplying, laying and connecting xLPE 6.6 KV(E) 3 core cable suitable for 28 KA short circuit rating with end connecters from HT panel to motor, starters, capacitor panels etc., complete as per direct...
Supplying of 1.1 KV Class Armoured Aluminium / copper conductor PVC insulated, extruded inner sheathed,galvanised,steel strip with glands/lugs/ferrules From Auxiliary transformer 6.6KV/ 433V, 160 KVA...
Concealed Conduit SystemSupplying heavy gauge PVC conduit pipe 25mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before conc...
Supplying heavy gauge PVC Conduit Pipe 25mm Dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cemen...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Point wiring using Copper wire with switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand...
Point wiring using Copper wire with switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand...
Point wiring using Copper wire with switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi stra...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300mm) (SR Item No.6.2.1, Page 30 of 105, Common SR2023-24 Volume-6 PWD...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. (SR Item No.13.14, Page 57...
Supply of round/square recess/surface mounted rollingtype LED Down light with ........W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has...
Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI should be greater than 80. Power Input: 2...
Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI should be greater than 80. Power Input: 2...
Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. Electronic stepped regulator. (SR Item No.3.14.16, Page 10 of 105,Common SR2023-24 Volume-6 PWD Ele
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ba...
Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary lengt...
Supplying and Fixing 32mm dia clampsss A G I pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street ...
Fabricating supplying and mounting MS box made out 18SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...
Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws. (SR Item No. 3.8, Page 9 of 105, Common SR ...
Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS...
Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment g...
Supply, installation and commissioning of Load Break Switch with HRO fuses, CBCT and ELR in painted sheet metal enclosure with operating console complete for use along with Power Factor capacitor bank...
Supplying, installing, testing and commissioning of Dewatering Pump, including cost of all materials, machinery, labour, etc., complete with all leads and lifts.(20 HP) Market Rate
Supplying and installing Temperature scanner suitable for operating at 110 V DC or 230 V AC mounted in a duly painted sheet metal enclosure provided with NO / NC relays for transmitting signal to VCBs...
Supply and installation of Auxiliary transformer 6.6 KV / 433 Volts 160 KVA copper wound, insulating oil filled with all accessories complete as per specifications..Item No.7.15 Page No 94 of CSR 2023...
Supplying, fixing and commissioning C.I Tamper proof Air valve of approved make, body and seat ring of bronze, PN 1.6 class conforming to IS: 14845 of specified diameter with all fixtures including co...
Supplying, fixing and commissioning of Pressure Relief Valve of pressure rating PN 1.6 as per IS 1538 (set pressure 4-5kg/cm2) including cost of all materials, labour, loading, unloading etc. and wit...
Kadarakoppa LIS-Annexure 8.1 Electrical Sub Station
POWER TRANSFORMER : Power Transformer 2 X 11 MVA, 110/6.6 KV Delta / Star, Dynll, 3 Ph, 50Hz, Oil type OLTC Power Transformer with RTCC Panel & built in AVR, As per IS-2026 Stds with fittings & access...
POWER TRANSFORMER : Power Transformer 2 X 11 MVA, 110/6.6 KV Delta / Star, Dynll, 3 Ph, 50Hz, Oil type OLTC Power Transformer with RTCC Panel & built in AVR, As per IS-2026 Stds with fittings & access...
110 KV SF-6 Circuit Breaker 110 kV, 40 kA class, SF-6 Circuit Breaker with terminal connector suitable for Al. tube/conductor with spring/semi pneumatic/pneumatic type operating echanism and mounting ...
110 kV Isolator 110 kV, 1250 A, 40 kA double break electrically cum manually operated isolators with solid core insulator, terminal connector suitable for Al. tube/conductor, marshalling box etc., com...
110 kV Isolator 110 kV, 1250 A, 40 kA double break electrically cum manually operated isolators with solid core insulator, terminal connector suitable for Al. tube/conductor, marshalling box etc., com...
Metering Equipments (i) Current Transformer:
Oil filled Current Transformer 0.2s class with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technical spec...
Metering Equipment (ii) ETVM for metering (main and check meter) Item No.53.02 Page No.23 of 81 Common SR 2023-24 Volume-6 ESCOM ( KPTCL, ESCOMs & PWD Ele)
ETVM meter Box Suitable for 2 ETV meters Item No.55.04 Page No.25 of 81 of Common SR 2023-24 Volume-6 ESCOM ( KPTCL, ESCOMs & PWD Ele)
Voltage Transformer Single phase,oil filled outdoor type VT with terminal connector suitable for AI tube/conductor with marshalling box etc complete as per technical specification.110 kV/sqrt3/110 V/s...
Protection CTs Oil filled Current Transformer 0.2s class with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technical specification.110 kV Class : 400-2...
BUS PT Single phase, oil filled, outdoor type VT with terminal connector suitable for Al. tube/conductor with marshalling box etc complete as per technical specification. 110 kV/sqrt3 / 110 V/sqrt3 - ...
96 kV Metal Oxide with surge counter Arrestor class : Discharge Class 2 (Station Low Duty (SL)) Item No.8.4 Page No.33 Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)
Control & Relay Panel: a) 110 kV Panel for Overhead Line - Type 1L Item No.16.4.7 Page No.42 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)
Control & Relay Panel: b) 110 kV Transformer Panel - Type 1T1 Item No.16.4.10 Page No.42of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)
110 KV Station Structures: (i) Fabrication, galvanising and supply of High Tensile Steel tower materials 1T1 (0.986MT) = (6 x 0.986MT=5.92MT)
110 KV Station Structures: (ii) Station Structure Beam suitable for 1B1, without under hung isolator (0.521MT) = (3x0.521MT=1.56MT) Item No.18.1 Page No.43 of Common SR 2023-24 Volume-6 KPTCL ( KPTC...
110 KV Mounting Structures:
(i) Isolators: 110 KV Isolators (0.726 * 5Nos) MT
110 KV Mounting Structures: (ii) Current Transformers: For 110 KV CTs (0.146 * 12Nos) MT
110 KV Mounting Structures: (iii) Voltage Transformers/ CVTs For 110 KV VT ( 0.137 * 6Nos) MT
110 KV Mounting Structures: (iv)Lightning Arrester For 30 KV LAs (0.105 * 9Nos) MT
110 KV Mounting Structures: (v) Pedestal Insulator For 110 kV PI (0.127 *6Nos) MT item No.18.1 Page No.43 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)(for material) Sl No.ii.A Pa...
Supply of galvanized Bolts & Nuts for above all (Station & Mounting structures) Sl No. 18.3 Page No.43 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele) Sl No.ii.A Page No.246 of Common SR 2...
i) Rigid bus: Aluminium Tube conforming to 6340 WP of IS- 5082/1969 (BS1600 - Sch. 40) of following sizes of 75 mm size Sl No. 36.1.2.4 Page No.56 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD ...
ii) Taps: Straight taps made of 63 mm Aluminium Tube (BS-1600) of 1750 mm vertical height for vertical portion and cross bus on 110 kV side with rounded off end.Sl No. 36.2.3 Page No.56 Common SR 2023...
iii) 7/3.15 mm G.I. Wire for ground conductor Sl No. 20.8 Page No.44 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele) Main Bus/Cross Bus as above using Single Lynx Conductor Sl No. 25 Page No...
Main bus/Cross Bus as above using single lynx conductor Sl No. 25 Page No.122 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Insulators i) Solid Core Bus Post Insulator 110 kV Sl No. 21.1.3 Page No.45 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
ii) Disc Insulator 90 kN Sl No.21.2.3 Page No.45 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Wedge Connector Clamps for Lynx Conductor (Post Insulators-6, SF-6 Breaker-18 (3 x 6Nos), Transformer HT Terminals-6, Isolators-6 x 5 =30, CT-12, PT-6, LA-9 etc.,) Sl No.47.8.3 Page No.70 Common SR ...
Control cable: i.19 Core 2.5 Sq mm Sl No. 13.16, 13.1, 13.6 13.15, 13.8, 13.7,13.9,13.14 Page No.40 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Control cable: ii.2 Core 2.5 Sq mm Sl No. 13.16, 13.1, 13.6 13.15, 13.8, 13.7,13.9,13.14 Page No.40 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Control cable: iii. 4 Core 2.5 Sq mm Sl No. 13.16, 13.1, 13.6 13.15, 13.8, 13.7,13.9,13.14 Page No.40 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Control cable: iv.14 Core 2.5 Sq mm Sl No. 13.16, 13.1, 13.6 13.15, 13.8, 13.7,13.9,13.14 Page No.40 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Control cable: v.4 Core 6 Sq mm Sl No. 13.16, 13.1, 13.6 13.15, 13.8, 13.7,13.9,13.14 Page No.40 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Control cable: vi.4 Core 4 Sq mm Sl No. 13.16, 13.1, 13.6 13.15, 13.8, 13.7,13.9,13.14 Page No.40 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Control cable: vii. 4 Core 10 Sq mm Sl No. 13.16, 13.1, 13.6 13.15, 13.8, 13.7,13.9,13.14 Page No.40 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Control cable: viii. 10 Core 2.5 Sq mm Sl No. 13.16, 13.1, 13.6 13.15, 13.8, 13.7,13.9,13.14 Page No.40 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Fire Fighting Equipments with necessary mounting Stands: A).Foam type extinguisher Fire Fighting Equipments with necessary mounting Stands: i.50 Litre capacity Sl No.51.1.1, 51.1.2 ,51.4, 51.5.2 , 5...
Fire Fighting Equipments with necessary mounting Stands: ii.9 Litre capacity Sl No.51.1.1, 51.1.2 ,51.4, 51.5.2 , 51.7.1, 51.7.2 Page No.74 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Fire Fighting Equipments with necessary mounting Stands: B).Water Type (Gas Pressure Type) 9.0 Liters Sl No.51.1.1, 51.1.2 ,51.4, 51.5.2 , 51.7.1, 51.7.2 Page No.74 Common SR 2023-24 Volume-6 KPTC...
Fire Fighting Equipments with necessary mounting Stands: C). Carbon Dioxide Type, 4.5 Liters capacity Sl No.51.1.1, 51.1.2 ,51.4, 51.5.2 , 51.7.1, 51.7.2 Page No.74 Common SR 2023-24 Volume-6 KPTCL...
Fire Fighting Equipments with necessary mounting Stands: D). Sand Type Sl No.51.1.1, 51.1.2 ,51.4, 51.5.2 , 51.7.1, 51.7.2 Page No.74 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele) Fire...
Fire Fighting Equipments with necessary mounting Stands: ii.Steel Stands Sl No.51.1.1, 51.1.2 ,51.4, 51.5.2 , 51.7.1, 51.7.2 Page No.74 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
RCC Pole - 9 Mtr Long, 145 Kg WL (Item No 1.01 Page No..3 of 81 of Common S R 2023-24 Volume-6 ESCOMs (KPTCL,ESCOMs&PWDEle)
POLES & HIGH MAST LIGHT Fabrication, Supplying, Erection, Testing and Commissioning of...... ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of .5 ...
a) Supply of LED Streetlight 70W luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulde...
b) Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for w...
c) Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 200 x 200 x 65 mm Sl No.1...
d) Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.63Amps Sl No.5.7.3 Page No.14 of 105 Common SR 2023-24 Volume-6 PWD (KPTC...
e) Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.32Amps Sl No.5.7.2 Page No.14 of 105 Common SR 2023-24 Volume-6 PWD (KPTC...
f) Supplying and fixing PVC conduit pipe and accessories of approved guage of open conduit system 25 mm dia 2 mm thick Sl No.1.1.2 Page No.2 of 105 Common SR 2023-24 Volume-6 PWD (KPTCL,ESCOMs & PW...
Ground mat A).Supplying and laying of MS flats, of various sizes, welding and applying ACB paint to welded portion and covering with sodium bentonite clay, as per the drawing/standard specifications a...
Ground mat B).Grounding of equipment with various sizes, G.I. Flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling...
Ground mat C).Providing 25mm dia M.S.rod 1.05 Mtr. Long earthmat spikes including heating, bending top 50mm over lap flattening and making spike edge at one end driving into the earth below the ground...
Ground mat D).Grounding of equipments by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metres long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using...
Ground mat E).Supplying & Providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc., Sl No.26 i Page No.124 Common SR 20...
Maintenance Tools and Plant A).Ring spanner set Sl No.35 Page No.53 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Maintenance Tools and Plant B).Pipe wrench 24 inches size Sl No.35 Page No.53 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Maintenance Tools and Plant C).Pipe wrench 18 inches size Sl No.35 Page No.53 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Maintenance Tools and Plant D).Double end spanner- 12 nos. per set Sl No.35 Page No.53 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Maintenance Tools and Plant E).Hack saw frame B185 Sl No.35 Page No.53 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Maintenance Tools and Plant F).Hydraulic crimping tools upto 1000 sqmm Sl No.35 Page No.53 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Maintenance Tools and Plant G).Rubber hand gloves 15 kV tested Sl No.35 Page No.53 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Maintenance Tools and Plant H).Rechargeable 5 W LED Hand Torch Sl No.35 Page No.53 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Maintenance Tools and Plant I).Insulated cutting plier 12 inch size Sl No.35 Page No.53 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Maintenance Tools and Plant J).Insulated cutting plier 8 inch size Sl No.35 Page No.53 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Maintenance Tools and Plant K).Line live tester AC/ DC 500 V Sl No.35 Page No.53 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Maintenance Tools and Plant L).screw driver 18 '' Sl No.35 Page No.53 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Maintenance Tools and Plant M).screw driver 12 '' Sl No.35 Page No.53 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Maintenance Tools and Plant N).Hammer 8 lbs Sl No.35 Page No.53 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Maintenance Tools and Plant O).Hammer 2 lbs Sl No.35 Page No.53 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Kadarakoppa LIS Annexure 8.1.1 Substation civil works
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
SITE SURFACING & JELLY SPREADING a)Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., com...
SITE SURFACING & JELLY SPREADING b) Supplying and providing stone dust in the station yard or wherever required including watering, ramming, consolidating and dressing. The rate includes the cost of m...
EQUIPMENT FOUNDATION 110 KV Station structure fabricated out of galvanised iron. Column type 1T1 with peak., 110 KV Isolators , 110 KV Current Transformer, NCT's, 110KV Lightning Arrestors, Pedestal ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Reinforced cement concrete for al Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Construction of platform with size stone, cement concert for erection of AuxilaryTransformer/Metering cubicle/Heavy Structure Equipment.Construction of platform (1.5x1.5x1.2) Mtr in size stone, for ...
SWITCH YARD FENCING a)Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required comp...
SWITCH YARD FENCING b) Providing and fixing RCC precast fencing pole of size 0.15mx0.15mx2.0m casted in M 20 with 20mm down size aggregates making holes for drawing barbed wire at 30 cm c/c using 8 m...
Kadarakoppa LIS Annexure 8.1.2 Fire wall
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (SR Item No.5.4, Page 9 of Vol-2, 2023-224
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
KADARKOPPA LIFT IRRIGATION SCHEME Annexure 8.2 Terminal bay
110 KV SF-6 Circuit Breaker 110 kV, 40 kA class, SF-6 Circuit Breaker with terminal connector suitable for Al. tube/conductor with spring/semi-pneumatic/pneumatic type operating mechanism and mounting...
Lightning Arrester 96 kV Metal Oxide with surge counter Arrestor class : Discharge Class 2 (Station Low Duty (SL)) Item No.8.4 Page No.33 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele...
110 kV Isolator:110 kV, 1250 A, 40 kA double break electrically cum manually operated isolators with solid core insulator, terminal connector suitable for Al. tube/conductor, marshalling box etc., com...
110 kV Isolator:110 kV, 1250 A, 40 kA double break electrically cum manually operated isolators with solid core insulator, terminal connector suitable for Al. tube/conductor, marshalling box etc., com...
Terminal Clamps for Single Lynx Conductor to (Post Insulators-6, SF-6 Breaker-6, Isolators-6 x 2 =12, CT-3, LA-3 etc.,) Item No.47.7.8 Page No.69 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs &...
Current Transformer: Oil filled Current Transformer 0.2s class with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technical specification.110 kV Class :...
Relay & Protection Panels 110 kV Panel for Overhead Line - Type 1L Item No.16.4.7 Page No.42 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)
110 KV Station Structures (i) Fabrication, galvanising and supply of High Tensile Steel tower materials 1T1 (0.986MT) = (6 x 0.986MT=5.92MT) Item No.18.1 Page No.43 of Common SR 2023-24 Volume-6 KPTC...
110 KV Station Structures (ii) Station Structure Beam suitable for 1B1, without under hung isolator (0.521MT) = (3x0.521MT=1.56MT) Sl No.ii.A Page No.246 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ...
110 KV Mounting Structures: (i) Isolators:110 KV Isolators (0.726 * 5Nos) MT Item No.18.1 Page No.43 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)(for material)Sl No.ii.A Page No.246...
110 KV Mounting Structures:(ii) Current Transformers:For 110 KV CTs (0.146 * 3Nos) MT Item No.18.1 Page No.43 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)(for material)Sl No.ii.A P...
110 KV Mounting Structures: (iii)Lightning Arrester :For 30 KV LAs (0.105 * 3Nos) MT Item No.18.1 Page No.43 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)(for material)Sl No.ii.A Pag...
110 KV Mounting Structures:(iv) Pedestal Insulator For 110 kV PI (0.127 *3Nos) MT Item No.18.1 Page No.43 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)(for material)Sl No.ii.A Page ...
Supply of galvanized Bolts & Nuts for above all (Station & Mounting structures) Sl No. 18.3 Page No.43 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele) Sl No.ii.A Page No.246 of Common SR 20...
i) Rigid bus: Aluminium Tube conforming to 6340 WP of IS- 5082/1969 (BS1600 - Sch. 40) of following sizes of 75 mm size Sl No. 36.1.2.4 Page No.56 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD ...
ii) Taps: Straight taps made of 63 mm Aluminium Tube (BS-1600) of 1750 mm vertical height for vertical portion and cross bus on 110 kV side with rounded off end.Sl No. 36.2.3 Page No.56 Common SR 2023...
iii) 7/3.15 mm G.I. Wire for ground conductor Sl No. 20.8 Page No.44 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Main Bus/Cross Bus as above using Single Lynx Conductor Sl No. 25 Page No.122 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Insulators i) Solid Core Bus Post Insulator 110 kV Sl No. 21.1.3 Page No.45 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Insulators ii.) Disc Insulator 90 kN Sl No.21.2.3 Page No.45 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
C - Type Wedge Connectors Lynx to Lynx ACSR Conductor.Sl No.47.10.7 Page No.70 Common SR 2023-24 Volume-6 KPTCL (KPTCL,ESCOMs & PWD Ele)
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
A).Grounding of equipment with various sizes, G.I. Flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes a...
B).Grounding of equipments by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metres long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron ...
C) Supplying & Providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc.Sl No.26 i Page No.124 Common SR 2023-24 Volume-...
Rearrangement of exisiting equipments in existing substation like 110 KV existing tower, 110 KV PT , 11 KV no.of lines, fencing, extension of bus to be shifted for extension of 110 KV Terminal bay
KADARKOPPA LIFT IRRIGATION SCHEME Annexure 8.2.1 Terminal Bay Civil works
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Earth work excavation for pipeline trenches in Soft rock (without requiring blasting) by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, ...
Earth work excavation for pipeline trenches in Hard rock (requiring blasting) by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construc...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for al Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
KADARKOPPA LIFT IRRIGATION SCHEME Annexure 8.3 Transmission Line
i) Supply and Erection of Towers 110 kV DC 'A' Type : A Normal (942.96 Kgs high tensile steel per tower) including cost of all material, machinery, labour, transportation, taxes with all leads and lif...
ii) Supply and Erection of Towers 110 kV DC 'A' Type : A - Normal (1911 Kgs mild steel per tower) including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc....
11 No's for 6.5 Kmi) Supply and Erection of Towers 110 kV DC 'A' Type A .3 Mtr Extension (1259.4 Kgs high tensile steel per tower) including cost of all material, machinery, labour, transportation, t...
A Type Normal Towers ii) Supply and Erection of Towers 110 kV DC 'A' Type A .3 Mtr Extension (2243.88 Kgs mild steel per tower) including cost of all material, machinery, labour, transportation, taxes...
A.3 Type Towers 2 No's for 6.5 Kmi) Supply and Erection of Towers 110 kV DC 'B' Type : B Normal (1587.90 Kgs high tensile steel per tower) including cost of all material, machinery, labour, transport...
A.3 Type Towers ii) Supply and Erection of Towers 110 kV DC 'B' Type : B Normal (2058.68 Kgs mild steel per tower) including cost of all material, machinery, labour, transportation, taxes with all le...
B Type Normal Towers 2 No's for 6.5 Kmi) Supply and Erection of Towers 110 kV 'DC 'C' Type: C Mtr Extension (2044.90 Kgs high tensile steel per tower) including cost of all material, machinery, labou...
B Type Normal Towers ii) Supply and Erection of Towers 110 kV 'DC 'C' Type: C Mtr Extension (1862.02 Kgs mild steel per tower) including cost of all material, machinery, labour, transportation, taxes ...
C Type Normal Towers 2 No's for 6.5 Kmi)Supply and Erection of Towers 110 kV DC 'D' Type: D (2969.89 Kgs high tensile steel per tower) including cost of all material, machinery, labour, transportatio...
C Type Normal Towers ii)Supply and Erection of Towers 110 kV DC 'D' Type: D (1649.00 Kgs mild steel per tower) including cost of all material, machinery, labour, transportation, taxes with all leads a...
D Type Normal Towers = 2 No's for 6.5 KmSupply and fixing of stub templates and aligning dismantling and transportaion of templates from one location to another location for 110 kV including cost of ...
Supply and fixing of Galvanised Bolts & Nuts including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc., complete and as directed by Engineer-In-Charge.Item...
Supplying and fixing G.I. Angle iron 45 x 45 x 5 mm (1 m length) with cleats, bolt & nuts as per specification and fixing above 0.5 m length each at inner and outer surface of the tower to facilitate ...
Supplying and fixing barbed wire as per specification Item No.2.b Page No.113 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)
Tower accessories a) Number Plates/Circuit Plates Item No.19.2 Page No.43 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)
Tower accessories b) Danger Plates/Caution Plates (1 no. per tower) Item No.19.3 Page No.43 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)
Tower accessories c) Phase Plates (set of 6 per tower) Item No.19.1 Page No.43 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)
Tower accessories d) Earth Bond 300 mm Long (all A type tower) Item No.19.5 Page No.43 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)
Tower accessories e) Earth Bond 450 mm Long (all B.C.D type tower) Item No.19.4 Page No.43 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)
Tower accessories: Supply and fixing of Grounding of tower with GI Pipe including the cost of GI pipe including cost of all material, machinery, labour, transportation, taxes with all leads and lifts...
Conductor: LYNX ACSR (6.5 Km*3 ) = 19.5 Km = 19500 Meter Item No.20.5 Page No.44 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele) (SR Item No.8.A.ii,Page No 9 of 27, KPTCL,ESCOMS PWD El...
Conductor & Earth Wire: 7/3.15 mm G.I. Wire for ground conductor (6.5 Km*1.05 ) = 6.82 Km = 6825 Meter Item No.20.8 Page No.44 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)
Hardware for Transmission Line Work: a) Double Tension Clamps with arcing horns for LYNX ACSR Item No.46.2 Page No.67 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)
Hardware for Transmission Line Work: b) Single Tension Clamps with arcing horns for LYNX ACSR Item No.46.1 Page No.67 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)
Hardware for Transmission Line Work: c) Double Suspension Clamps with arcing horns for LYNX ACSR Item No.46.4 Page No.67 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)
Hardware for Transmission Line Work: d) Single Suspension Clamps with arcing horns for LYNX ACSR Item No.46.3 Page No.67 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)
Hardware for Transmission Line Work: e) M.S.C. Joints for LYNX ACSR Item No 46.6 Page No.67 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)
Hardware for Transmission Line Work: f) Pre-formed Armour Rods for LYNX ACSR Item No 46.7 Page No.67 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)
Hardware for Transmission Line Work: g) Repair Sleeves for LYNX ACSR Item No 46.8 Page No.67 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)
Hardware for Transmission Line Work: h) Vibration Damper for LYNX ACSR Item No 46.9 Page No.67 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)
Conductor & Earth Wire: Supply and fixing of 120KN insulators along with hardware for LYNX ACSR including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc I...
Conductor & Earth Wire: Supply and fixing of 90 KN insulators along with hardware for LYNX ACSR including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc I...
Hardware for Earthwire: Welding of bolts and nuts Item No 1.1 e Page No.113 of Common SR 2023-24 Volume-6 KPTCL ( KPTCL, ESCOMs & PWD Ele)
KADARKOPPA LIFT IRRIGATION SCHEME Annexure 8.3.1 110Kv Transmission Line Civil Works
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Earth work excavation for pipeline trenches in Soft rock (without requiring blasting) by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, ...
Earth work excavation for pipeline trenches in Hard rock (requiring blasting) by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construc...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for al Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
KADARKOPPA LIFT IRRIGATION SCHEME Annexure 5 Construction of intake channel
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barr...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barr...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barr...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Providing and laying in position Cement Concrete for levelling course for all works in foundation.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...
Form work for staging (Foundation works) (Common SR item No 2.6.1 in Vol-1,Pg.no.16 for 2023-24)
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Formwork For Staging (For Sub structure) (Common SR item No 2.6.1 in Vol-1,Pg.no.16 for 2023-24)
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing 20 mm thick 100 mm depth tarfelt expansion joint filler board for cement concrete lining of canal including cost of all materials, labour etc., complete with all leads and lifts.(...
Providing and constructing size stone pitching using 200 to 250 mm size stones with pin headers at 2 per sqm set in CM 1 : 5 proportion by volume with pointing joints in CM 1 : 3 proportion by volume ...
Kilometre Stone Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc (iii) 200 m stone (p...
Providing and fixing 200 x 200 x 750 mm roughly dressed boundary / demarcation / chainage / arrow stones including cost of all materials, labour, engraving marks, excavating pit, fixing in position, m...
Kilometre Stone Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc (ii)Ordinary kilome...
Providing and fixing GI pressure relief pipe with one end closed by perforated GI plate and other end provided with alluminium lid hinged to pipe including cost of all materials, labour, drilling 8 mm...
Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than...
KADARKOPPA LIFT IRRIGATION SCHEME Annexure 6 Construction of Jackwell cum Pump House
Clearing and Grubbing Road Land:Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlie...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Form work for Staging (For Foundations) Concrete Quantity for Isolated Footings (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1)
Form work for Staging (For Foundations) Concrete Quantity for All other types (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1)
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Form work for Staging (For Sub Structure) 0-5m height (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) Concrete Quantity for Earth retaining Structures
Form work for Staging (For Sub Structure) 0-5m height (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) Concrete Quantity for Piers & Abutments
Form work for Staging (For Sub Structure) 0-5m height (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) Concrete Quantity for RCC Columns
Form work for Staging (For Sub Structure) 0-5m height (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) Concrete Quantity for RCC Beams, Lintels
Form work for Staging (For Sub Structure) 5-10m height (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) Concrete Quantity for Earth retaining Structures
Form work for Staging (For Sub Structure) 5-10m height (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) Concrete Quantity for Piers & Abutments
Form work for Staging (For Sub Structure) 5-10m height (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) Concrete Quantity for RCC Columns
Form work for Staging (For Sub Structure) 5-10m height (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) Concrete Quantity for RCC Beams, Lintels
Form work for Staging (For Sub Structure) 10-15m height (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) Concrete Quantity for Earth retaining Structures
Form work for Staging (For Sub Structure) 10-15m height (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) Concrete Quantity for Piers & Abutments
Form work for Staging (For Sub Structure) 10-15m height (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) Concrete Quantity for RCC Columns
Form work for Staging (For Sub Structure) 15-20m height (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) Concrete Quantity for Earth retaining Structures
Form work for Staging (For Sub Structure) 15-20m height (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) Concrete Quantity for Piers & Abutments
Form work for Staging (For Sub Structure) 15-20m height (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) Concrete Quantity for RCC Beams, Lintels
Form work for Staging (For Sub Structure) 15-20m height (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) Concrete Quantity for RCC Slabs
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Form work for 0-5m height Staging (For SuperStructure)Concrete Quantity for RCC Columns (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1)
Form work for 0-5m height Staging (For SuperStructure) Concrete Quantity for RCC Slabs (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1)
Form work for 0-5m height Staging (For SuperStructure)Concrete Quantity for RCC Beams, Lintels (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1)
Form work for 5-10m height Staging (For SuperStructure) Concrete Quantity for RCC Columns (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1)
Form work for 5-10m height Staging (For SuperStructure Concrete Quantity for RCC Slabs (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1)
Form work for 5-10m height Staging (For SuperStructureConcrete Quantity for RCC Beams, Lintels (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1)
Form work for 10-15m height Staging (For SuperStructureConcrete Quantity for RCC Columns (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1)
Form work for 10-15m height Staging (For SuperStructureConcrete Quantity for RCC Beams, Lintels (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1)
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nomina...
Providing and laying Polished Glazed Vitrified tiles with thickness 10mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing and fixing galvalume/ cladding sheets for roof with necessary fixtures etc., including cost of all materials, machinery, labour, scaffolding etc., complete with lead upto 50m and all lifts.(...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directions of ...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming ...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth ren...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in charge.(Common SR 20...
Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment,including cutting slabs to the required size for the opening and fixin...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Design, fabrication, supply, erection and commissioning of embedded parts consisting of liners for trash rack grooves ( for coarse and fine screens ) with all accessories for pump house intake struct...
Design, fabrication, supply, erection and commissioning of trash racks consisting of a number of panels of suitable height with vertical trash bars welded to structural steel frame at wider interval a...
Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails, gate groove liners etc., with all accessories for pump house ...
Design, fabrication, supply, erection, testing and commissioning of sliding type stoplog gate consisting of skin plate, horizontal and vertical girders, lifting hooks, bronze padded slide blocks, stif...
Design, fabrication, supply, erection and commissioning of electrically operated mono-rail hoist assembly consisting of electric motor, rope drum, gear system, wire rope with lifting attachment, festo...
Design, fabrication, supply, erection and commissioning of structural steel hoist supporting structure consisting of columns, cross beams, bracings, stiffeners, mono-rail with fixtures etc., with all...
KADARKOPPA LIFT IRRIGATION SCHEME Annexure A Drilling of Borewells to Provide Water
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...
Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...
Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, col...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, col...
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-B Construction of Toilet in JWPH
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinaflushing cistern & C.P. flush bend with fittings & C.I. b...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.(Common SR item No. 14.23, in Vol-2, Pg.no.135 ...
White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap (Common SR item No. 14.7.4, in Vol-2, Pg.no.132 for 2023-24)
Septic tank construction for 3000 lts Lump sum amount
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-C Construction of Watchman Quarters
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (Common SR item No. 5.4 in Vol-2, Pg.no.9 for 2023-24)
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Formwork For Staging (Foundation works) Plinth beam
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Formwork For Staging (For Super Structure) 0-5m Height RCC Beams, Lintels
Formwork For Staging (For Super Structure) 0-5m Height RCC Roof Slabs
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standar...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes including cost of materials, labour, usage charges...
Providing and laying Polished Glazed Vitrified tiles with thickness 10mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth ren...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Finishing walls with water proofing cement paint of required shade : Old work (one coats @ 2.20 kg/10 m²) complete. including preparing the surface after thoroughly cleaning the surface to remove all...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Water supply and sanitary works 8% of Estimated amount
Electricity 10% of Estimated amount
Miscellaneous 5% of Estimated amount
KADARKOPPA LIFT IRRIGATION SCHEME Jackwell Approach Road
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Cement stabilisation in Embankment Providing, laying and spreading available soil in the embankment on a prepared surface, pulverising, mixing the spreaded soil in place with Soil Stabilisor with 2% o...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Compacting original ground supporting embankment
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of ...
Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and com...
Wet Mix Macadam (Plant mix method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...
Prime Coat over WMM/WBM Prime Coat over WMM/WBM: Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and s...
Tack coat on Granular surface treated with primer Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.25 kg/m2 on Granular Surface.(Common SR Item No.5.33 o...
Provision of 15 nos rumble strips covered with premix bituminous carpet, 15-20 mm high at center, 250 mm wide placed at 1 m center to center at approved locations to control speed, mark...
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats with bituminous binder VG-30
Providing and Fixing 'Logo Board ' of PMGSY at Starting Point
Providing and fixing of typical Logo board as per
specifications and drawing. Two ACP Sheet of 3mm thick, top and Bottom plate duly welded...
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bit...
Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal ...
Providing and erecting a "W" metal beam crash barrier system comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x...
KADARKOPPA LIFT IRRIGATION SCHEME APPENDIX12.3-CONSTRUCTIONOFBOXCULVERT
Earth work excavation for Foundation by mechanical means for all works &depth upto 3 m, as per drawing and technical specifications, including settingout, shoring, strutting, barricading, caution ligh...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Form work for Staging (For Foundations) (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) 0-5m height Concrete Quantity for All other Types
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Form work for Staging (Sub Structure) (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) 0-5m height Concrete Quantity for Box Culvert
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, haooking, laping/welding joints, tyin...
Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification (Common SR Item No 12.3 in Vol-3, Pg-117 for 2023-24)
Providing and constructing contraction joints by fixing 310 mm wide central bulb type approved quality PVC water stop in two lines with 8 mm dia. steel dowel rods on either side at 1 m interval, fomin...
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-E Construction of Embakment
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and constructing dry rubble stone pitching with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging ston...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-9 Rising Main
Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete.(Common SR Item No.8.3 in Vol-4, Pg.no.101 for 2023-24)
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of blasting materials, barri...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) raising main pipe of specif...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) raising main pipe of specif...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) raising main pipe of specif...
Providing and applying pipe coating of fibres, coal tar and solvent based rubber modified bituminous primer of density 0.92 gms/cu cm and viscosity of 1000-2000 cps @ 150 gms/sqm followed by seven lay...
Providing and filling murrum / gravely soil ( CNS soil ) for foundation or around pipes including cost of all materials, labour, spreading soil in layers of 100 to 150 mm, breaking clods, watering, c...
Refilling available earth around trenches/pipelines,cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5m....
Providing and fixing 200 x 200 x 750 mm roughly dressed boundary / demarcation / chainage / arrow stones including cost of all materials, labour, engraving marks, excavating pit, fixing in position, m...
Kilometre Stone:
Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc (Common SR Item No....
Supplying, fixing and commissioning C.I Tamper proof Air valve of approved make bodyand seat ring of bronze PN 1.6 conforming to IS:14845 of specified diameter with all fixturesincluding cost of all m...
Supplying, fixing and commissioning C.I Tamper proof Air valve of approved make bodyand seat ring of bronze PN 1.0 conforming to IS:14845 of specified diameter with all fixturesincluding cost of all m...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Supplying, fixing and commissioning C.I Scour valve (sluice valve) of approved make bodyand seat ring of bronze PN 1.0 conforming to IS:14846 of specified diameter and to withstand specified pressure ...
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-A Air Valve Chamber
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Formwork for Staging (Sub structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 0.0 m to 5.0 m Height
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment,including cutting slabs to the required size for the opening and fixin...
Refilling available earth around trenches/pipelines,cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5m....
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-B Scour Valve Chamber
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Formwork for Staging (for Sub structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 0.0 m to 5.0 m Height
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment,including cutting slabs to the required size for the opening and fixin...
Refilling available earth around trenches/pipelines,cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5m....
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-C Thrust Block 0 to 15 degree Bends
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Form work for Staging (For Sub Structure) (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) 0-5m height Concrete Quantity for Earth retaining Structures
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Refilling available earth around trenches/pipelines,cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5m....
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-C Thrust Block 15 to 30 degree Bends
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Form work for Staging (For Sub Structure) (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) 0-5m height Concrete Quantity for Earth retaining Structures
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Refilling available earth around trenches/pipelines,cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5m....
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-C Thrust Block 30 to 45 Degree Bends
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Form work for Staging (For Sub Structure) (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) 0-5m height Concrete Quantity for Earth retaining Structures
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Refilling available earth around trenches/pipelines,cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5m....
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-C Thrust Block 45 to 60 Degree Bends
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Form work for Staging (For Sub Structure) (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) 0-5m height Concrete Quantity for Earth retaining Structures
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Refilling available earth around trenches/pipelines,cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5m....
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-E Highway Road Crossing
Dismantling of Flexible Pavements Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately As per MoRT&H Specification 202...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Formwork for Staging (for sub structure) 0.0 m to 5.0 m Height (Common SR Vol-1, Item No. 2.6.1, Page 16 of CSoR 2023-2024)
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm ( before compaction ) including cost of all materials, machinery, labour, all oth...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and laying Dense Graded Bituminous Macadam with 100 TPH capacity HMP batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-40, @ 4.5 per cent by weight...
Providing and laying Bituminous Concrete with 100 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @5.4 per cent of mix and f...
Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and com...
Construction of Subgrade and Earthen Shoulders: Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporti...
Clearing and Grubbing Road Land:Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlie...
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vi...
Kilometre Stone:Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc (ii) Ordinary kilome...
Painting lines, dashes, arrows etc on roads in two coats on old work with ready mixed road marking paint conforming to IS: 164 on bituminous surface, including cleaning the surface of all dirt, dust a...
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-F Asphalt Road Crossing
Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately(Common SR Vol-3, Item No.2.18,Page 11 of CSoR 2023-2024)
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Formwork for Staging (For sub structure) 0.0 m to 5.0 m Height (Common SR Vol-1, Item No. 2.6.1, Page 16 of CSoR 2023-2024)
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Refilling available earth around trenches/pipelines,cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5m....
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory rolle...
Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and com...
Providing and laying Bituminous Concrete with 100 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @5.4 per cent of mix and f...
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vi...
Painting lines, dashes, arrows etc on roads in two coats on old work with ready mixed road marking paint conforming to IS: 164 on bituminous surface, including cleaning the surface of all dirt, dust a...
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-G Cart Track Crossing
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Formwork for Staging (For Sub structure) 0.0 m to 5.0 m Height (Common SR Vol-1, Item No. 2.6.1, Page 16 of CSoR 2023-2024)
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Refilling available earth around trenches/pipelines,cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5m....
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-H Canal Crossing
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Form work for staging (Sub structure) 0-5m height
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Refilling available earth around trenches/pipelines,cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5m....
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-I Railway Track Crossing
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Installation of product pipe by manual jacking method - Manufacturing, providing, transporting, rolling, lowering, laying & jointing, testing, commissioning of ERW (Electric Resistance Welded), SAW (S...
Refilling available earth around trenches/pipelines,cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5m....
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-J one way surge tank
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Form work for Staging (For Sub Structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 0.0 m to 5.0 m Height Concrete Quantity for RCC Columns
Form work for Staging (For Sub Structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 0.0 m to 5.0 m Height Concrete Quantity for All other Types
Form work for Staging (For Sub Structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 0.0 m to 5.0 m Height Concrete Quantity for RCC Beams
Form work for Staging (For Sub Structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 0.0 m to 5.0 m Height Concrete Quantity for RCC Slab
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Form work for Staging (For Super structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 0.0 m to 5.0 m Height Concrete Quantity for RCC Columns
Form work for Staging (For Super structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 0.0 m to 5.0 m Heigh Concrete Quantity for RCC Beams
Form work for Staging (For Super structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 0.0 m to 5.0 m Heigh Concrete Quantity for RCC Slab
Form work for Staging (For Super structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 5.0 m to 10.0 m Heigh Concrete Quantity for RCC Columns
Form work for Staging (For Super structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 5.0 m to 10.0 m Heigh Concrete Quantity for RCC Beams
Form work for Staging (For Super structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 5.0 m to 10.0 m Heigh Concrete Quantity for RCC Slab
Form work for Staging (For Super structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 10.0 m to 15.0 m Height Concrete Quantity for RCC Columns
Form work for Staging (For Super structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 10.0 m to 15.0 m Height Concrete Quantity for RCC Beams
Form work for Staging (For Super structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 10.0 m to 15.0 m Height Concrete Quantity for RCC Slab
Form work for Staging (For Super structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 15.0 m to 20.0 m Height Concrete Quantity for RCC Columns
Form work for Staging (For Super structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 15.0 m to 20.0 m Height Concrete Quantity for RCC Beams
Form work for Staging (For Super structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 15.0 m to 20.0 m Height Concrete Quantity for RCC Slab
Form work for Staging (For Super structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 20.0 m to 25.0 m Height Concrete Quantity for RCC Columns
Form work for Staging (For Super structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 20.0 m to 25.0 m Height Concrete Quantity for RCC Beams
Form work for Staging (For Super structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 20.0 m to 25.0 m Height Concrete Quantity for Earth Retainig Structures
Form work for Staging (For Super structure) (Common SR Vol-1, Item No.2.6.1,Page 16 of CSoR 2023-2024) 20.0 m to 25.0 m Height Concrete Quantity for RCC Slab
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever requ...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth ren...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of appr...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre,with necessary supports of same angle iron etc. as directed, ...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) raising main pipe of specif...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) raising main pipe of specif...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) raising main pipe of specif...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) raising main pipe of specif...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Providing and fixing of DI Double flanged wafer type (Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel...
DIDF DPCV API 594 DRILLED TO IS 1538, BODY AND DOORS IN DI IS 1865 GR 500/7 , SPRING STEEL SPRINGS , SS 410 STOP PIN
[Non Return Valve] Market Rate 600 mm dia-Non Return Valve
Float Valve Market Rate 300 mm dia -Float Valve
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-10 Delivery Chamber
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Form work for staging (for foundation works) (Common SR Item No.2.6.1,Vol-1,, Page No.16 for 2023-24)
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Formwork For Staging (For Sub structure) M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
Formwork For Staging (For Sub structure) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Formwork For Staging (For Super structure) Common SR Item No. 2.6.1 in Vol-1, Page No.17 for 2023-24
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and constructing contraction joints by fixing 230 mm wide central bulb type PVC water stop in single line supported by 10 mm dia. steel dowel rods on either side at 1 metre interval includin...
Providing rubble and sand filling in layers of 250 to 300 mm including cost of all materials,machinery, labour, watering, ramming and all other ancillary operations complete. Common SR Item No. 3.10, ...
Providing and constructing protective railing consisting of cast in-situ railing posts of size 150 x 150 mm at bottom, 100 x 100 mm at top and 750 mm height, placed approximately at 2 m centre to cent...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-12 Canal Cross Regulator
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Formwork For Staging (Foundation works) M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Formwork For Staging Sub structure M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Formwork For Staging Super structure M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing 20 mm thick 100 mm depth tarfelt expansion joint filler board for cement concrete lining of canal including cost of all materials, labour etc., complete with all leads and lifts. ...
Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift service gate consisting of skin plate, vertical and horizontal girders, wheels, stiffeners, lifting b...
Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift service gate consisting of skin plate, vertical and horizontal girders, wheels, stiffeners, lifting b...
Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails, breast wall liner ( upto one vent height plus 1 m above the ro...
Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails, breast wall liner ( upto one vent height plus 1 m above the ro...
Design, fabrication, supply, erection, testing and commissioning of adequate capacity screw type hoist consisting of supporting structure, platfom, railing, ladder with all accessories for operating c...
Providing and constructing protective railing consisting of cast in-situ railing posts of size 150 x 150 mm at bottom, 100 x 100 mm at top and 750 mm height, placed approximately at 2 m centre to cent...
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-11 Energy Dissipation Chamber
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Form work for staging (for foundation works) (Common SR Item No.2.6.1,Vol-1,, Page No.16 for 2023-24)
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Formwork For Staging (For Sub structure) M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
Formwork For Staging (For Sub structure) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and constructing contraction joints by fixing 230 mm wide central bulb type PVC water stop in single line supported by 10 mm dia. steel dowel rods on either side at 1 metre interval includin...
Providing rubble and sand filling in layers of 250 to 300 mm including cost of all materials,machinery, labour, watering, ramming and all other ancillary operations complete.
Providing and constructing protective railing consisting of cast in-situ railing posts of size 150 x 150 mm at bottom, 100 x 100 mm at top and 750 mm height, placed approximately at 2 m centre to cent...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-D Anchor block 0 to 5 Degree Bends
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Form work for Staging (For Sub Structure) (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) 0-5m height
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Refilling available earth around trenches/pipelines,cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5m....
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-D Anchor block 5 to 10 Degree Bends
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Form work for Staging (For Sub Structure) (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) 0-5m height
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Refilling available earth around trenches/pipelines,cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5m....
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-D Anchor block 10 to 15 Degree Bends
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Form work for Staging (For Sub Structure) (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) 0-5m height
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Refilling available earth around trenches/pipelines,cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5m....
Section 2- Part A- Detailed Engineering
Add 1% for Survey, Investigation and Detailed Engineering of Lift Scheme consisting Electro-mechanical, Electrical works, Intake channel, Jack well cum Pump House, Rising Main including structures, De...
Section 3- Part B- Operation and Maintenance
Operation and maintenance of Lift Scheme
KADARKOPPA LIFT IRRIGATION SCHEME Annexure-K Anti buoyancy Block
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out,shoring, strutting, barricading, caution lig...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Form work for Staging (For Sub Structure) (Common SR 2023-24 - Item no 2.6.1, Pg 16 of Vol-1) 0-5m height Concrete Quantity for Earth retaining Structures
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Refilling available earth around trenches/pipelines,cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5m....
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kadarkoppa detailed tender notification.docx
Others - Detailed tender notification • 0.05 MB
circulars 2 pdf.pdf
Others - Circulars and Guidelines • 38.59 MB
KADARKOPPA DRAWINGS.pdf
Others - Drawings • 22.94 MB
Kadarkoppa DTP 03.07.2024.docx
Tender Document • 16.22 MB
circulars 1 pdf.pdf
Others - Circulars and Guidelines • 37.85 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .