Tender ID

Kerala

AOC

Works

Civil Works - Others

Annual Plan-2024-25-Nilambur Municipality- Improvement Works to Padikkunnu ST Nagar in Ward No.24-Project No.473/25-New Project No.354/26-General Civil Work

Local Self Government Department

Nilambur Municipality | Malappuram, Kerala

Amount: ₹13.6 LCloses: 20 Oct 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published14 Oct 2025
Closed20 Oct 2025
Awarded4 Nov 2025

Bids

Item Rate

2 Bids4 Nov 2025

#	Company	Amount	Rank	Status
1	RASHID KK L1₹11.6 LAccepted-AOC 673639 \| MALAPPURAM \| KERALA \| 673639	₹11.6 L	L1	Accepted-AOC L1
2	DINEESH M. L2₹11.9 L+₹34,030.19 (2.94%)Rejected-Finance KERALA KL	₹11.9 L+₹34,030.19 (2.94%)	L2	Rejected-Finance L2

BoQ Comparative

Line Items (7)

Sl No	Description	Qty	Unit	RASHID KK L1	DINEESH M. L2
1.00ST Nagar Improvement
1.00	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	2.62	cum	7,210.9 ₹18,885.35 Lowest	7,422.98 ₹19,440.78
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	3,908.84	kg	146.04 ₹5,70,846.56 Lowest	150.33 ₹5,87,615.47
1.00	OD220196/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shapes and pitch of corrugation as approved by Engineer in charge)0.35 mm(+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade ,5-7 micrones epoxy primer on both side of the sheet and polyester top coat 15- 18 micrones .Sheet should have protective guard film of 25 micrones minimum to avoid scratches during transportation and should be supplied in single length up to 12 m or as desired by Engineer in charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x55 mm)with EPDM seal, complete up to any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required. Details for cost for 216.14 sqm(External dimension of plinth) Area of roof 20.2x10.70 m=216.14 sqm Sheets used=20 nosx10.70 mx 1.06m=226.84sqm add 3% wastage=6.81 Total=233.65 sqm	842.73	sqm	486.97 ₹4,10,384.72 Lowest	501.3 ₹4,22,461.05
1.00	OD220195/2025-2026:Providing and fixing precoated galvanised steel sheet roofing accessories 0.35 mm(+0.05%) total coated thickness , zinc coating 120 grams per sqm as per IS : mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete: Ridge plain(500-600 mm) Details of cost for 20.20 metre MATERIALS (12.51.1): one piece plain ridges Consider a shed of 20x10 m (external dimensions at plinth)	93.1	per metre	441.15 ₹41,071.07 Lowest	454.13 ₹42,279.5
1.00	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	135	sqm	128.72 ₹17,377.2 Lowest	132.5 ₹17,887.5
1.01	2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil	103.92	sqm	27.55 ₹2,863 Lowest	28.36 ₹2,947.17
1.01	OD310282/2025-2026:(odfrom16.68)Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.	103.92	sqm	924.55 ₹96,079.24 Lowest	951.75 ₹98,905.86

Tender Value

₹13.6 L

EMD Value

₹2,760

Closing Date

20 Oct 2025, 11:00 amClosed

Tender Inviting Organisation

Name

Assistant Engineer,

Address

Assistant Engineer,

Work Description

Annual Plan-2024-25-Nilambur Municipality- Improvement Works to Padikkunnu ST Nagar in Ward No.24-Project No.473/25-New Project No.354/26-General Civil Work

Tender Information

Tender ID

2025_LSGD_809072_3

Reference Number

TN/AE/LSGD/NBR/08/2025-26

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Item Rate

Location

Nilambur Municipality

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender Documents.

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical/Finance

RequiredCOPY OF VALID CONTRACTOR LICENSE AND GST REGISTRATION (.pdf)

RequiredCOPY OF PAN CARD AND AADHAR CARD (.pdf)

RequiredCOPY OF PRELIMINARY AGREEMENT (.pdf)

RequiredCOPY OF E - PAYMENT FORM (.pdf)

RequiredCOPY OF INTEGRITY PACT AND AFFIDAVIT (.pdf)

RequiredCOPY OF FORM OF TENDER (.pdf)

RequiredBID DOCUMENT (.pdf)

RequiredTENDER SCHEDULE (BOQ) (.xls)

Fee & Financial Details

Tender Fee Amount

₹34,044

EMD Fee Amount

₹2,760

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

4 Nov 2025

Published

14 Oct 2025

Bid Opening

21 Oct 2025

Download Starts

14 Oct 2025

Download Ends

20 Oct 2025

Submission Starts

14 Oct 2025

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

finance_1349888.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.91 MB

Work Item Documents

SBD.pdf

Tender Documents • 2.21 MB

EPAYMENT.pdf

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

RASHID KK

L1₹11.6 LAccepted-AOC

673639 | MALAPPURAM | KERALA | 673639

DINEESH M.

L2₹11.9 L+₹34,030.19 (2.94%)Rejected-Finance

KERALA KL

Sl No	Description	Qty	Unit	RASHID KK L1	DINEESH M. L2
1.00ST Nagar Improvement
1.00	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	2.62	cum	7,210.9 ₹18,885.35 Lowest	7,422.98 ₹19,440.78
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	3,908.84	kg	146.04 ₹5,70,846.56 Lowest	150.33 ₹5,87,615.47
1.00	OD220196/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shapes and pitch of corrugation as approved by Engineer in charge)0.35 mm(+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade ,5-7 micrones epoxy primer on both side of the sheet and polyester top coat 15- 18 micrones .Sheet should have protective guard film of 25 micrones minimum to avoid scratches during transportation and should be supplied in single length up to 12 m or as desired by Engineer in charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x55 mm)with EPDM seal, complete up to any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required. Details for cost for 216.14 sqm(External dimension of plinth) Area of roof 20.2x10.70 m=216.14 sqm Sheets used=20 nosx10.70 mx 1.06m=226.84sqm add 3% wastage=6.81 Total=233.65 sqm	842.73	sqm	486.97 ₹4,10,384.72 Lowest	501.3 ₹4,22,461.05
1.00	OD220195/2025-2026:Providing and fixing precoated galvanised steel sheet roofing accessories 0.35 mm(+0.05%) total coated thickness , zinc coating 120 grams per sqm as per IS : mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete: Ridge plain(500-600 mm) Details of cost for 20.20 metre MATERIALS (12.51.1): one piece plain ridges Consider a shed of 20x10 m (external dimensions at plinth)	93.1	per metre	441.15 ₹41,071.07 Lowest	454.13 ₹42,279.5
1.00	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	135	sqm	128.72 ₹17,377.2 Lowest	132.5 ₹17,887.5
1.01	2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil	103.92	sqm	27.55 ₹2,863 Lowest	28.36 ₹2,947.17
1.01	OD310282/2025-2026:(odfrom16.68)Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.	103.92	sqm	924.55 ₹96,079.24 Lowest	951.75 ₹98,905.86

Sl No

Description

Qty

Unit

RASHID KK

DINEESH M.

1.00ST Nagar Improvement

1.00

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

2.62

cum

7,210.9

₹18,885.35

Lowest

7,422.98

₹19,440.78

1.00

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

3,908.84

146.04

₹5,70,846.56

Lowest

150.33

₹5,87,615.47

1.00

OD220196/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shapes and pitch of corrugation as approved by Engineer in charge)0.35 mm(+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade ,5-7 micrones epoxy primer on both side of the sheet and polyester top coat 15- 18 micrones .Sheet should have protective guard film of 25 micrones minimum to avoid scratches during transportation and should be supplied in single length up to 12 m or as desired by Engineer in charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x55 mm)with EPDM seal, complete up to any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required. Details for cost for 216.14 sqm(External dimension of plinth) Area of roof 20.2x10.70 m=216.14 sqm Sheets used=20 nosx10.70 mx 1.06m=226.84sqm add 3% wastage=6.81 Total=233.65 sqm

842.73

sqm

486.97

₹4,10,384.72

Lowest

501.3

₹4,22,461.05

1.00

OD220195/2025-2026:Providing and fixing precoated galvanised steel sheet roofing accessories 0.35 mm(+0.05%) total coated thickness , zinc coating 120 grams per sqm as per IS : mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete: Ridge plain(500-600 mm) Details of cost for 20.20 metre MATERIALS (12.51.1): one piece plain ridges Consider a shed of 20x10 m (external dimensions at plinth)

93.1

per metre

441.15

₹41,071.07

Lowest

454.13

₹42,279.5

1.00

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

135

sqm

128.72

₹17,377.2

Lowest

132.5

₹17,887.5

1.01

2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil

103.92

sqm

27.55

₹2,863

Lowest

28.36

₹2,947.17

1.01

OD310282/2025-2026:(odfrom16.68)Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

103.92

sqm

924.55

₹96,079.24

Lowest

951.75

₹98,905.86