Kerala

Active

Works

Civil Works - Buildings

Annual Plan-2026-27 RENNOVATION OF MULLAMPARA AYURVEDA HOSPITAL -Project no-800/27-General Civil Work

Local Self Government Department

Manjeri | Malappuram, Kerala

Amount: ₹8.5 LCloses: 14 Oct 20263d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published7 Oct 2026
Closes14 Oct 2026
Bid Opening16 Oct 2026

Tender Value

₹8.5 L

EMD Value

₹21,185

Closing Date

14 Oct 2026, 5:00 pm3d left

Tender Inviting Organisation

Name

Asst.Engineer

Address

Municipal office Manjeri

Work Description

Annual Plan-2026-27 RENNOVATION OF MULLAMPARA AYURVEDA HOSPITAL -Project no-800/27-General Civil Work

Tender Information

Tender ID

2026_LSGD_876746_21

Reference Number

2716147/26/3

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Period of Work

180 days

Location

Manjeri

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

9 documents required · 9 mandatory

Fee/PreQual/Technical/Finance

RequiredBOQ (.xls)

Requiredpreliminary agreement (.pdf)

RequiredSBD with NIT (.pdf)

Requiredform of tender (.pdf)

RequiredAffidavit (.pdf)

RequiredE payment form (.pdf)

RequiredBid security remittance (.pdf)

RequiredIntegrity pact (.pdf)

RequiredBidder valid registration certificate (.pdf)

Fee & Financial Details

Tender Fee Amount

₹1,870

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹21,185

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

7 Oct 2026

Published

7 Oct 2026

Bid Opening

16 Oct 2026

Download Starts

7 Oct 2026

Download Ends

14 Oct 2026

Submission Starts

7 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (16 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Painting and sheet work
1.001	15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet	135.3	sqm	-	-
1.002	15.17.2:Dismantling steel work in single sections including dismembering and stacking within 50 metes lead in:Channels, angles, tees and flats	412.81	kg	-	-
1.003	15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 or leaner mix ( including equivalent design mix)	0.64	cum	-	-
1.004	OD158164/2026-2027:Demolishing Laterate masonry /Hollow block/solid block work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge. In cement mortar	2.06	cum	-	-
1.005	50.6.5.2:Hollow block masonry using pre cast blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part 1 of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete	4.69	cum	-	-
1.006	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	614.53	kg	-	-
1.007	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	286.59	kg	-	-
1.008	OD154554/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	137.5	sqm	-	-
1.009	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	75.6	sqm	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.31 MB

Work Item Documents

BOQ_1489890.xls

BOQ • 0.31 MB

viewnit.pdf

Tender Documents • 0.02 MB

viewsbd.pdf

Tender Documents • 1.81 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Painting and sheet work
1.001	15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet	135.3	sqm	-	-
1.002	15.17.2:Dismantling steel work in single sections including dismembering and stacking within 50 metes lead in:Channels, angles, tees and flats	412.81	kg	-	-
1.003	15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 or leaner mix ( including equivalent design mix)	0.64	cum	-	-
1.004	OD158164/2026-2027:Demolishing Laterate masonry /Hollow block/solid block work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge. In cement mortar	2.06	cum	-	-
1.005	50.6.5.2:Hollow block masonry using pre cast blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part 1 of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete	4.69	cum	-	-
1.006	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	614.53	kg	-	-
1.007	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	286.59	kg	-	-
1.008	OD154554/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	137.5	sqm	-	-
1.009	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	75.6	sqm	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Painting and sheet work

1.001

15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet

135.3

sqm

1.002

15.17.2:Dismantling steel work in single sections including dismembering and stacking within 50 metes lead in:Channels, angles, tees and flats

412.81

1.003

15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 or leaner mix ( including equivalent design mix)

0.64

cum

1.004

OD158164/2026-2027:Demolishing Laterate masonry /Hollow block/solid block work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge. In cement mortar

2.06

cum

1.005

50.6.5.2:Hollow block masonry using pre cast blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part 1 of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

4.69

cum

1.006

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

614.53

1.007

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

286.59

1.008

OD154554/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

137.5

sqm

1.009

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

75.6

sqm