69/2023-24/EDCRIncreasing load capacity of overloaded Transformer and Construction of line etc. under Business Plan 2024-25, EDD-I, Rampur

Amount

Carriage of the following material from Store Centre, Rampur to work site including loading & unloading.

MS Channal (Dropper)

MS Channal (Top)

T-off Chennal

Sub Station Angle

ST Pole 11 Mtr Long

11/0.4 KVA T/F 100 KVA

11/0.4 KVA T/F 250 KVA

LT AB Cable3*240sqmm

ABC Cable 3*120+1*95+1*16 sqmm

ABC Cable 3*95 sqmm

LT AB Cable3.5*240 sq mm

LT XLPE Cable 3.5*150 sq mm

LT XLPE Cable 3.5*240 sq mm

LT XLPE Cable 3.5*400 sq mm

LT XLPE Cable 1*240 sq mm

LT XLPE Cable 1*400 sq mm

ACSR Weasal Conductor

Fuse Set

single-Phase Distribution Box

3-Phase Distribution Box

Earthing Complete

Stay set Complete

Polymeric 11 KV Pin Insulator

Polymeric 11 KV Disc Insulator with fitting

other line material

11/0.4 KV 100 KVA T/F(Recived Back Site to Store)

11/0.4 KV 160 KVA T/F(Recived Back Site to Store)

Dismantling of HT & LT connection & replace of follwoing capacity T/F from substation double poles/plinth by Healthy transformer(including connection) and loading and unloading with associated work at both ends within 70 kms.

100 KVA trasnformer

160 KVA trasnformer

Installing of Healty Transformer, connection HT & LT of follwoing capacity T/F at substation Single Pole/ double poles/plinth by Healthy transformer(including connection) and loading and unloading with associated work at both ends within 70 kms.

Increasing load capacity of overloaded TF by 100 KVA trasnformer

Increasing load capacity of overloaded TF by 250 KVA trasnformer

a) Double pole structure Excavation of foundation pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole)Erection of support(pole) complete with providing and fixing of all clamps made of MS flat of size 75x8 mm. an other accessories . The work includes fabrication work and fixing of cross bracing sets 3.5 Mtr from MS Angle 65x65x6 mm/50x50x6 mm. The work includes cutting holes and providing MS Bolts of 16x40 mm size in the middle of the cross bracing with 1 No. sparing washer of proper size.

STP 11 Mtr long

Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. a) Double support

STP 11 Mtr long

Grouting of Stay Rods(20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:8(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc.

Fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps.

Earthing of support with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 8SWG and earthing lugs.

fixing of Sub Station Angle as per RESPO Norms and as per direction of Supervising Engineer.

fixing of 11 KV Pin Insulator with Pin as per RESPO Norms and as per direction of Supervising Engineer.

fixing of 11 KV Disc Insulator with Fitting as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of ACSR Weasal Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of LT AB Cable3*240sqmm as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of ABC Cable 3*120+1*95+1*16 as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of ABC Cable 3*95 as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of LT AB Cable3.5*240 sq mm per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of LT XLPE Cable 3.5*150 sq mm as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of LT XLPE Cable 3.5*240 sq mm as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of LT XLPE Cable 3.5*400 sq mm as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of LT XLPE Cable 1*240 sq mm as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding ofLT XLPE Cable 1*400 sq mm sq mm per RESPO Norms and as per direction of Supervising Engineer.

Installing/Fixing of Fuse Set as per RESPO Norms and as per direction of Supervising Engineer.

Installing of TPMO as per RESPO Norms and as per direction of Supervising Engineer.

Installing of Single-Phase Distribution Box as per RESPO Norms and as per direction of Supervising Engineer.

Installing of 3-Phase Distribution Box as per RESPO Norms and as per direction of Supervising Engineer.

Construction of plinth for 250 KVA Transformer 2x2x1.5 M with fencing as per RESPO Norms and as per direction of Supervising Engineer (Material for plint and fencing will be provide by the Contractor)

Providing and fixing Clamp with Nut and Bolts as per direction of Supervising Engineer.

Providing and fixingClamp with Nut and Bolt for DP as per direction of Supervising Engineer.

Providing and fixing Clamp for T-off Channel as per direction of Supervising Engineer.

Providing and fixing Clamp I Hooks as per direction of Supervising Engineer.

Providing and fixing Lugs as per direction of Supervising Engineer.

Providing and fixing GM Connector 300 amp as per direction of Supervising Engineer.

Providing and fixing Stone Pad as per direction of Supervising Engineer.

Providing and fixing Danger Board with Clamp as per direction of Supervising Engineer.

Providing and fixing Barbed Wire as per direction of Supervising Engineer.

SAFDAR HUSAIN CONTRACTOR