AS AND AS TO ELECTROPLATING SHOP IN BAY 09 OF BLDG NO 15 SPECIAL REPAIRS TO DRAINAGE SYSTEM AT KHUTAR/RANA BLOCK AND PROVISION OF DEFICIENT TOILETS AT KAKATIA GATE AT NAVAL DOCKYARD VISAKHAPATNAM

Amount

SCHEDULE 'A' PART-I [ B/R WORKS]

Dismantling of rolling shutter including all fittings etc., complete all as specified and as directed.

Supply & Fix 1.25 mm thick steel rolling shutters, with out ball baring, as specified including top cover anchoring rod, hasp and staple, shaft, pipe, brackets, 800kg motor capacity and one shop coat of primer, erected in position as indicated complete motor operater type with bevel gear box and crank handle as specified and safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

Material & Labour for powder coated anodized aluminium frame for door, window and ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed.

Supply and fix aluminium door shutter with chowkats mad out of hollow aluminium sections as mentioned below, each shutter having 2 Nos. ‘D’ type aluminium handles of 200 mm long, 2 Nos. aluminium tower bolts of 200 mm long and 1 No. mortice lock of 6 lever with key in duplicate, regulated by double action hydraulic floor door spring, shutter partly glazed with 5.5 mm thick sheet glass and partly paneled with 12 mm thick pre-laminated particle board fixed with glazing clips, rubber beadings and aluminium beading complete all as specified and as directed : Chowkat size : 101.60 x 44.45 x 2.40 mm (1.608 Kg./Rm appx.) Shutter Top rail : 114.30 x 2.15 mm thick (1.836 Kg./Rm appx.) Bottom rail : 150.00 x 2.20 mm thick (2.376 Kg./Rm appx.) Middle rail : 83.50 x 1.70 mm thick (1.243 Kg./Rm appx.) Vertical rail : 85.00 x 1.80 mm thick (1.302 Kg./Rm appx.)

Supply & fix aluminium standard sections of weight not less than 0.55Kg/Sqm as in sliding window with three/ two tracks with 5.5mm thick plain glass with rubber beading aluminium beading, clips etc., including taking down unserviceable windows complete all as specified and directed. Note for item Nos.1.04 & 1.05 :-The scope of work include for taking down existing damaged aluminium door/window and the unit rate quoted shall be deemed to include for the same.

Material & Labour for 25mm thick cement concrete type 'B-1', 1:2:4 using 12.5mm graded aggregate as in flooring and 15 mm thick screed bed or bedding layer for laying tiles in CM 1:6 and non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed.

Material & labour for 25mm thick cement concrete type 'B-1' , 1:2:4 using 12.5mm graded aggregate as in flooring and 15 mm thick screed bed or bedding layer for laying tiles in CM 1:6 and non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed.

Material & labour for 25mm thick cement concrete type 'B-1' 1:2:4 using 12.5mm graded aggregate as in flooring and 15 mm thick screed bed or bedding layer for laying tiles in CM 1:6 and Machine cut kota stone slab flooring 20-25mm thick over screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Material & labour for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed complete all as specified and as directed.

Material & labour for 30mm thick cement concrete type 'B-1' 1:2:4 using 12.5mm graded aggregate as in flooring and 20 mm thick screed bed or bedding layer for laying tiles in CM 1:6 and acid resistant tiles 25mm thick vitrious ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type in floors etc., complete all as specified and as directed.

Material & labour for chequered cement concrete tiles 20cm x 20 cm x 25 mm thick, set and jointed in neat cement slurry and pointed in grey cement and pigment to match the tiles complete all as specified and as directed.

Dismantling water tank exceeding 500 ltr and not exceeding 1000 ltrs capacity complete all as specified and as directed.

Supply & Fix solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supporting and fixing in opening as per specification and drawing complete all as specified and as directed.

Supply & Fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C' channel having at PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed

Material & labour for GI Pipe 15mm dia medium grade with all fitting and fixed complete to walls and ceiling or laid in floors including taking up or down existing corroded pipe complete all as specified and as directed.

All as per item No 1.16 above but 20mm dia.

Supply & Fix PVC (SWR) multi floor trap size 75mm, plain with CP grating including jointing with solvent cement etc., complete all as specified and as directed

Taking down rain water pipes (any size or pattern) including all fitings, heads, shoes, bends iron necks etc., complete all as specified and as directed.

Supply and fix in repair PVC (SWR) pipes in single socket in any length with rubber joints fixed to walls, 75 mm bore complete all as specified and as directed

Supply and fix 110mm dia PVC (SWR) bends in any radius complete all as specified and as directed.

Supply and fix 75mm dia PVC (SWR) bends in any radius complete all as specified and as directed.

Supply and fix 75mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.

Supply and fix in repairs grating doom 125 mm dia with waste hole of PTMT (Min weight 40gms) complete all as specified and as directed.

Supply and fix in repairs vitreous us china squatting pan `ORISSA` pattern size 580 x 440 mm with integral foot rests exceeding flushing cistern and flush pipe including provision of concrete bedding complete all as specified and as directed.

Supply and fix 32mm dia waste coupling of PTMT suitable for urinals & WHB complete all as specified and as directed.

Supply and fix urinals spreader of PTMT any colour for fixing with 15mm dia pipe complete all as specified and as directed.

Demolition of cement concrete any description not exceeding 15cm thick above or below ground floor and removing the debries from the Dockyard premises complete all as specified and as directed

Material & labour for 100mm thick PCC (1:2:4) type B-1 (using 20mm graded aggregate) as in sub base complete all as specified and as directed.

Material & labour for RCC Type B1, 1:2:4 in (20mm aggregate) stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings, RCC water tanks upto 1500 litres complete all as specified and as directed.

Material & labour for Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in with cement mortar (1:4) complete all as specified and as directed

Material & labour for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all complete all as specified and as directed

Material & labour for RCC in Slabs supported on walls, beams and columns in floors,chajjas, roofs, landings, balconies, canopies, deck slabs and in shelves of type B1, 1:2:4 20mm graded aggregate complete all as specified and as directed

Rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete including making surfaces even and smooth without using extra cement complete all as specified and as directed

Demolition brick work or stone masonry built in cement mortar including all quoins, arches, pillars etc., and removing the debries away from the Dockyard premises complete all as specified and as directed

Demolition of RCC of any description and in any position not otherwise specifically provided for and removing the debries away from the Dockyard premises complete all as specified and as directed. (reinforcement cut as required to facilitate demolition).

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing)and removing rubbish off the premises complete all as specified and as directed

Removing demolised/excavated material and depositing outside of Dockyard permises placed at a level not exc 1.5 mtr above the starting point in soils by all security clearance by Naval Police complete all as specified and as directed.

Material & labour for PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in foundation filling of drains or manholes etc.,including necessary formwork finished fair and even surface without using extra cement including weathering slightly rounded or chemfered angles and throating complete all as specified and as directed

Material & labour for pre-cast cement concrete masonary in PCC 1:3:6 type C1 using 20mm graded aggregate with solid block, exceeding 10cm in width setting in CM 1:6 complete all as specified and as directed.

Material & labour for PCC 1:3:6, type C1 (using 20mm graded stone aggregate) in coping including necessary formwork finished fair and even surface without using extra cement including weathering slightly rounded or chemfered angles and throating complete all as specified and as directed

Material & labour for walling of random rubble masonry uncoursed well barbed bedded and solidly hearted built in CM 1:6 using kondalite stone complet all as specified and as directed

Cleaning the blockage in drains including removing of debris sludges deposits etc., accumulatd out side the dokcyard premises in including removing etc complete depth of drain not exceeding 450 mm and disposing of foul materials obtained complete all as specified and as directed

All as per item No 1.44 above but depth of drain exceeding 450 mm but not exceeding 600 mm complete all as specified and directed.

Taking down cement plaster on brick walls etc., including racking out joints hacking for key scrubbing down with water etc., complete all as specified and as directed

Material & labour rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces and finishing the surface even and smooth with out using extra cement complete all as specified and as directed.

Material & labour for forming fair finished drain or channel 50 cm in girth in cement concrete, using extra cement, including forms, moulds, mitered/stoped ends etc, complete all as specified and as directed.

Material & labour for precast RCC (1:2:4) type B1 (using 20mm graded stone aggregate), in cover slabs of open drains including of form work and set in cement mortar 1:4 complete all as specified and as directed

Material & labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

All as per item No 1.50 above but for 6mm to 8mm dia

All as per item 1.50 above but 5 mm dia and over upto and including 10mm dia in striupps, spacers and binders, complete all as specified and as directed.

Dismantling of mild steel work or wrought iron of any description any position complete all as specified and as directed

Material & labour for mild steel framed bracket of angles or tees with web and flange cut to shape, drilled and counter sunk for screw including bending and welding angles, riveting etc., complete confirming to Fe-290. Gde E-165 as in MS gratin , duct cover support, ladder and similar work etc., complete all as specified and as directed

Material & labour for preparation of new steel surfaces and applying two coats of chlorinated rubber paint over a coat of red oxide primer complete all as specified and as directed

Material & labour preparation of new plastered surfaces of walls and applying three coats of white wash compete all as specified and as directed

Demolition of PCC any desctiption and any position not otherwise specified complete all as specified and directed.

Material & labour for excavating over areas, not exceeding 1.5 m deep and getting out Hard / Dense Soil complete all as specified and directed.

All as per item No 1.58 above but for each additional 1.5m or part thereof in depth beyond the first 1.5 m complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep and getting out in hard/dense soil complete all as specified and as directed

Material & labour for Cement concrete in foundations, filling and mass concrete, beds of man-holes type D-2 1:4:8, (40mm graded aggregate) complete all as specified and as directed.

Material & labour for Reinforced cement concrete (design mix M-30 grade using 20mm graded aggregate) in foundations footings, plinth beams, bases for columns, etc., and mass concrete complete all as specified and as directed.

Material & labour for Reinforced cement concrete (design mix M-30 grade using 20mm graded aggregate) Columns, pillars, piers, posts and struts complete all as specified and as directed.

Material & labour for Reinforced cement concrete (design mix M-30 grade using 20mm graded aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

Material & labour for Reinforced cement concrete (design mix M-30 grade using 20mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material & labour for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.

Removal of extra excavated soil not exceeding 50m and depositing where directed at level not exceeding 1.5m above the starting point complete all as specified and as directed

Material & labour Formwork flat or curved to sides of concrete foundations, footings, bases of columns, and plinth beams and similar work vertical or to batter complete all as specified and as directed

Material & labour Formwork flat or curved to to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed

Material & labur Formwork flat or curved to sides and soffits offloor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelvesincluding sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed

Material & labour Formwork flat or curved to Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Material & labour for 15mm thick rendering in two layers of 10mm thick backing coat inCM 1:6 and 5mm thick floating coat in CM 1:4 mixed with water proofing compound on all external wall surfaces complete all as specified and as directed.

Material & labour for rendering 5mm thick in CM 1:3 on soffits of RCC slabs, roof projections, soffits and sides of RCC beams, waist slab, Loft Slab, RCC shelves, Chajjas, and the like complete all as specified and as directed

M&L for 40mm thick Damp proof course in cement concrete 1:2:4 type B-O to horizontal or vertical surface including necessary formwork

Material & labour for Filling under floors or in foundations including watering and consolidation complete all as specified and as directed

Material & labour for Hardcore of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 10cm thick, watered and rammed to a true surface complete all as specified and as directed

Material & labour for 100mm thick PCC 1:4:8 Type D-2 as in sub base for floors complete all as specified and as directed

Material & labour for 40mm thick Cement concrete type B-1,1:2:4 (20mm gradedaggregate) as in plinth protection complete all as specified and as directed

Material & labour for Screed bed or bedding layer of mortar 20 mm thick in Cm 01:4 for laying floor finishes complete all as specified and as directed

Material & labour for coloured non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed

Material & labour for Glazed ceramic tiles in vertical surface 300x 200x 7 mm / 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing coat in Cm 1:3 complete all as specified and as directed

Material & labour for two coat of wheather proof exterior emulsion paint over a coat of primer on newly plastered wall surfaces including preperation of surfaces etc complete all as specified and as directed.

Material & labour for applying two coats of oil bound distemper over a coat of alkali resistant primer on newly plastered surfaces of wall, Ceilings, soffits of RCC slabs, roof projections, soffits and sides of RCC beams, waist slab, Loft Slab, RCC shelves, Chajjas, and the like including preperation of surfaces complete all as specificed and as directed

Supply & Fix Aluminium anodised door / window / ventilator / partition frames including shutters (Two no glazed and gauzed) side hung type with out sash bar, standard aluminium grill, using standerd section incl necessary joining cleats glazing clips, rubber packing, anodise Aluminium snap beading screws, handle and locking arragment etc complete all as specified and as directed. Note : Glass & fly proof mesh measured and paid seperately as supply only. & Hardwares shall be measured and paid separetely

Supply & fix 150mm long extruded aluminium alloy anodised handles fabricated type complete all as specified and as directed

Supply & fix 100mm long extruded aluminium alloy anodised handles fabricated type complete all as specified and as directed

Supply & FIx Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips to sheet cast or extruded sections and fixing bolt or cast aluminium alloy complete all as specified and as dirceted

Supply & Fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as dirceted.

Supply & Fix Aluminium anodised barrel tower bolt of extruded section of size 100mm long complete all as specified and as dirceted.

Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply & Fix Aluminum anodised butt hings 75mm long extruded alluminum, alloy with galvanised mild steel hinge pin, type C-22 complete all as specified and as directed.

Supply & Fix rotational moulded polythylene water storage tanks 500 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage 1000 ltrs. capacity tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Supply & Fix vitreous china water closet, pedestal type, white including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe anti syphonage pipes etc complete all as specified and as directed

Supply & Fix vitreous China wash hand basin,'OVAL TYPE' 550 mm including with single tap hole CP pillar cock of 15 mm dia brass CP chain and rubber plug, waste pipe and PVC connection complete all as specified and as directed

Supply & Fix in repairs vitreous china wash hand basin size 580 x 450 mm white with brackets and flat back including cutting for pinning in ends of brackets fixed in repairs complete all as specified and as directed

Supply & Fix for Vitreous China Urinal, Half stall type, white complete all as specified and as directed Note:- Excluding flushing cistern, flush pipe and waste pipe

Supply and fix vitreous china urinal, bowl type flat back of size 465x355x265mm white (min) with grating and union for discharge pipe complete all as specified and as directed.

Supply & Fix PVC low level flushing cistern,10 litres capacity, including PVC flush pipe of required length, 15 mm bore ball valve and PVC connection 300 mm and other accessories, complete all as specified and as directed.

Supply and fix in repairs PVC low level flushing cistern 10 ltrs capacity including all fittings and brackets bends flush pipe etc., complete all as specified and as directed

Supply & Fix 110 mm dia PVC (SWR) Pipe single socketed in any length with rubber ring joint laid in trenches/fixed on floor/walls including jointing with solvent cement all as specified and as directed

Supply Fix in repair PVC (SWR) pipes in single socket in any length with rubber joints fixed to walls, 110 mm bore complete all as specified and as directed

Material & labour for UPVC 75 mm dia Nahani trap/floor trap with PVC grating complete all as specified and directed.

Supply & Fix Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and as directed

Supply and fix towel rail 600 mm long of aluminium anodised 20mm dia D type between flanges complete all as specified and as directed

Supply & Fix for Soap dish, vitreous China white, approximate size 160 x 160 x 90mm embedded in the wall complete all as specified and as directed

Supply & Fix for 20mm bore UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed

Supply & Fix for 15mm bore UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe conceled complete all as specified and as directed

Supply & FIx15 mm bore pillar tap cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes in repairs complete all as specified and as directed.

Supply & Fix in repairs 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure with long screwed shanks and fly nuts, screwed for iron pipe fixed in repairs complete all as specified and as directed.

Supply & Fix 15 mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed

Supply & Fix in repairs 15 mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed

Supply & Fix 15 mm bore fancy type, chromium plated with long shank and cup (concealed type) Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified as directed

Material & Labour for 15mm dia stop valves, cast copper alloy screwed down, chromium plated high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and as directed

Supply & Fix in PVC waste pipe, 32mm dia, 60 cm long for WHB, urinal and etc., complete all as specified and as directed.

Supply and fix in repairs PVC waste pipe with PVC reducer sockets 32 mm dia coupling, 60 cm long complete all as specified and as directed

Supply & Fix in PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified

Supply & Fix in repairs PVC connection (high density) 15 mm dia double brass sockets both ends with rubber washer complete all as specified and as directed.

M&L for cleaning the existing concrete surfaces, providing 10 mm thick screed / rendering in CM 1:4 mixed with water proofing compound @ 2% by weight of cement, laying bitumen primer @ 0.50 lit / sqm applying evenly a tack coat of industrial bitumen 85/25 @1.2 Kg/Sqm including cleaning of surfaces on top and bottom of water proofing membrane, laying APP based polymeric membrane minimum weight 3Kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm ) shall be laid over entire roof surface and on vertical surface upto groovs with other laps of 100mm, the over lap shall be sealed by flames and applying one coat of bitumenous alumium paint @0.10 Kg/sqm including prepaation of surfaces complete all as specified and as directed. Note : WPC shall be measure and paid seperately

Supply only integral water proofing compound complete all as specified and as directed

PCC 1:3:6, type C2 (using 40mm graded stone aggregate), concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed

Material & labour Salt-Glazed stone ware drain pipes, 150mm dia (internal dia) laid in trenches and jointed complete all as specified and as directed

PCC 1:2:4, type B1, (using 20mm graded stone aggregates) for Coping and haunching concrete complete all as specified and as directed

RCC 1:2:4, type B1, (using 20mm graded stone aggregate), for cover slabs complete all as specified and as directed

Construction of RCC septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in walls, Base slab, Baffle walls and Roof slab including beams etc with vent shaft, manhole openings with cover connection etc., complete with effective depth of 1.5m and overall depth of 3m for 50 users, with upflow filter including media complete all as specified and as directed

SCHEDULE 'A' PART-II [ E/M WORKS]

M&L for point wirng surface type in non-metallic ISI PVC conduit medium grade with 1.5 sq mm size multi stranded fire retardant PVC sheathed FRLSH copper conductor cable and PVC insulated FRLSH cable of size 1.5 sq mm as earth continuity conductor including clamps, screws gutter / plug etc., with and including sheet steel terrminal board with bakelite 3 mm thick sheet for one light point point controlled by one 5 Amps switch one way complete all as specified and as directed.

All as per item No. 3.01 above for One fan point controlled by one 5 Amps switch one way

All as per item No. 3.01 above for One 3/5 pin 5 Amp switch socket outlet on independent board

All as per item No. 3.01 above for One 3/5 pin 5 Amp socket outlet on same board.

Supply & fix piano switch 5 Amp oneway flush type complete all as specified and as directed

Supply & Fix socket outlet 2 in 1,3 pin 5 amp complete all as specified and as directed

Material & labour for point wiring surface type in non mettalic ISI PVC conduit med grade with 2.5 sq mm size multi stranded FRLSH PVC sheated copper conductor and PVC insulated FRLSH copper cable of size 2.5 sq mm incl clamps, screws, gutties, plug, terminal boards with bakelite sheet 3 mm thick heavy duty as earth continuity conductor for 3/5 pin socket outlet 15 Amps complete all as specified and as directed

Supply & fix 15 Amps switch socket combination complete all as specified and as directed

Supply & fix Ceiling rose,3 phase /PVC/ polycarbonate, isolated body complete all as specified and as directed

S&F Industrial box type batten with CRCA body, pre coated with white and prewired including Retro LED tube 18 watt 4" long including dismantling taking down unserviceable fitting all as specified and directed. Make : Batten Bajaj, Cat Part No. BRLB -DB 218 / CG/ Philips / Wipro and Retro LED Cat part No. BRLB18WCW of Bajaj / CG/ Philips / Wipro

Supply & Fix SP MCB 6 to 32 Amps 'C' Curve complete all as specified and as directed. Make : Legrand Cat Part No. 4086-09 to 4086-17 / Schneider / ABB

Supply & Fix SPN MCB 6 to 32 Amps 'C' Curve complete all as specified and as directed. Make : Legrand Cat Part No. 4086-09 to 4086-17 / Schneider / ABB

Supply & Fix doubledoor SPNDB 4 way double door with 200 amp rated bus bar complete all as specified and as directed.

Material & labour for wiring with 2 runs of 6 sqmm FRLSH grade PVC insulated copper conductor wire single core multistrand for phase & neutral, 6 sqmm FRLSH grade PVC insulated copper conductor wire for earch continuity drawn in and including non metallic ISI marked PVC conduit medium grade dia with conduit accessories complete all as specified and as directed. Note :- 2 runs of cable, 1 run of earth wire and 1 run of conduit together shall be measured as 1 unit length

Supply & Fix LED building security light 45 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener including dismentling taking down unsv fitting any type complete all as specified and as directed. Make-CG, Cat Part No LSTP-15-CDL/ Bajaj/ Philips/ HPL/ Havells

SRI SAI VAGDEVI BUILDERS

PRADEEP ENTERPRISES

AYYAPPA CONSTRUCTIONS

UNITY PROJEKTZ

S A R CONSTRUCTIONS

G Srinivas Rao