POTH SOLAR PUMPING WATER SUPPLY SCHEME

Amount

Civil Works

Excavation in soil mixed with single bouldres etc. requiring the use of specials T&P for foundation including lift up to 1.5M and lead up to 30M filling watering and ramming of Excavated earth in to the trenches or into the sides between foundation.

Providing & fixing of French Well of MS Pipe 200mm dia, length 1.2mtr with inlet, outlet arrangement, Coated with black synthetic enamel paint over a coat of red oxide primer as per departmental type & design complete.

Providing & fixing of Intake Chamber of size 0.6X0.6X0.6m (4mm thick MS Sheet) having inlet, outlet, Washout and overflow arrangement with Welded GI Socket, Coated with black synthetic enamel paint over a coat of red oxide primer as per departmental type & design complete.

Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:4 (1 cement : 4coarse sand) including supply of all material,labour,T&P etc.required for proper completion of work.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). including supply of all material,labour,T&P etc.required for proper completion of work.

Excavation of pipeline trench in Soil mixed with Boulder, lift upto 1.5m, lead upto 30m. Including refilling, watering, ramming of excavated earth into the trenches and removal of surplus earth upto a distance of 60m from trenches including supply of labour, T&P etc complete.

Supply and Carting, of following sizes of MSERW YST210 grade plain ended pipes from store to site of work, lowering them into trenches, laying true to alignment & gradient, laying & Jointing of Pipe by electric welding, making horizontal & vertical bends of any degree as per site conditions including cutting of pipes for making up lengths as required for completion of works & also including cost of welding materials (Advani make welding rods), all other materials,labours & T&P etc. required for proper completion of work. .

40mm dia 4.00mm thicknes.

Supply and Carting , laying jointing (including cost of jointing materials like specials and fittings, white lead, hemp and oil etc.) fixing and testing of M.S. galvanised screwed and socketed pipes (Medium quality).including cutting and threading etc. complete confirming to IS:1239 (Part-I) make of pipe:Jindal (Hisar)/Parkash Surya/ TT Swasthik

GI Pipe 15 mm dia (Medium Qualty)

GI Pipe 20 mm dia (Medium Qualty)

GI Pipe 25 mm dia (Medium Qualty)

GI Pipe 32 mm dia (Medium Qualty)

Providing and fixing gun metaled Gate valves as per IS: 778/1997

25mm dia

32mm dia

Supply And fixing of Air Valve 15mm dia

Finishing with Food grade Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’ specifications i/c appropriate priming coat, preparation of surface, etc. complete. On steel work External Dia of Pipe in 32.8mm

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Pillar thrust block as per type design , assuming Anchor block @60 m.

Centring and shuttering including strutting,ropping etc. and removal of form for thrust block.

Supply of all materials, labours, T&P. etc. to construct wheel valve chamber of internal size 0.45x0.45x0.45 mtr of stone masonary, 15mm thick cement plaster with cm 1:4 and with M.S. Cover with locking arrangement as per type design complete.

Supply of all materials, labour T&Petc Construction of R.C.C CWR of following capacities with M.S Ladder out side the tank and alluminium ladder inside of the tank M.S M.H cover with locking arrangement, supply & fixing of outlet, inlet, over flow and wash out pipes with necessary sluice vales, pipe pieces (Including cost of materials) flooring 0.60 m wide apron , painting on tank body vertical pipes, ladder, M.S M.H cover, ventilator column etc. complete with approved water proofing ( apex)/enamel paint, testing filling water for testing purpose etc. including supply of vertical pipes and special assuming bearing capacity as 10 MT/M2

supply and installation of bucket type chlorinator of 25 liters capacity.

Making ferrule connection in the existing main of G.I. or any type of pressure mains with saddle piece, service connections, fittings and fixing of G.M. ferrule including tapping the main, including the cost of all materials like GI Specials,brass bib cock and GM ferrule etc.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) including supply of all material,labour,T&P etc.required for proper completion of work.

Construction of RR dry stone massonry including supply of all material, labour, T&P etc.required for proper completion of the work.

Supply and installation of 125mm odex bore (i) Transportation of Suitable truck mounted Rig machine, air compressor OP unit camp equipage connected T&P and necessary accessores, tubewell assembly housing pipe etc. including loading, unloading erection and leveling of rig machine upto site of work etc complete in all respect as per direction of Engineer incharge required for drilling and development of mini tubewell.. (ii) Drilling of bore 125 mm size by rig machine ODEX method in alluvial, boulders pebbles, rocky stone, sticky clay etc: including lowering, welding of required kind size of MS ERW casing pipe (blind/ slotted) from ground level upto entre depth ordered by the department rates are included ms enw cashing pipe. (iii) Drilling of bore 125 mm size DTH attachment from bottom of casing shoe. (iv) Development of tubewell by the suttable are compressor unit to the satisfaction of Engineer incharge to give sand free discharge, adeast for 12 Hrs. (v)Development of tubewell by the suttable submersible OP unit complete with Lowering and lifting of pumping plant having suitable discharge including running of OP unit and yield testing of tubewell by V notch, atleast for 30 Hrs to the satisfaction of Engineer incharge. (vi) Dismantling of rig machine and other equipments and clearance of site after finishing the job. (vii)Supply and fixing of 125 mm size well cap after completion of work made from MS ERW Pipe and MS Sheet of 8 mm thick. (viii)Supply and fooing of suitable size casing shoe suitable for ODEX drilling and made From EN-24 steel. (ix) Supply of Suitable bit tube of 100 cm in length made out of seamless casing pipe attachment etc. (x)Supply and fixing of 125 size MS housing clamp 8 mm thick including nut bolt and washers complete set.(xi)Supply and foxing of 125 size MS casing pipe as per 15 3589/4270 [Blind pipe 125 mm dia 6.6mm wall thickness. (xii)Supply and fading the following size MS casing pipe as per IS 3589/4270 (alotted pipe 32 mm dia 6 4mm wall thickness

Installation of Solar Submersible Pump

Submersible -Grand Fos Make Model No.-SQF 1.2-3 for pump Head-150 M Flow-1000 LPH

Solar Pump Controller Make-Grandfos Gl 121

SOLAR PANEL

Structure (GI/Hot Dip Galvanized)

Copper Wire 4sqmm 3 Core

Installation Charges, (Civil Work For Solar Panel Installation including Conduit and Other accessories)

Narayan Datt Joshi

m/s vijay kishor singh mehta