Construction of Indoor Stadium at Bodhkharbo

Amount

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge

All kinds of Soil @ 70%

Ordinary @ 20%

Hard rock@10% (BP)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:

All kinds of Soil @ 70%

Ordinary @ 20%

Hard rock@10% (BP)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Dry stone soiling (anythickness) on level including cost of stone all complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size including all sort of carriage complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Including all sort of carriage

Reinforcement for RCC work including straightening, bending, cutting, placing in position and binding all complete .Hot rolled deformed bars.

Centering, shuttering including strutting propping etc and removal of formwork for:

Foundations, footings, bases of columns etc. for mass concrete

Columns, Pillars, Piers, Abutments, Posts and Struts

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Suspended floors, roofs, landings, balconies and access platforms.

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)

Providing and fixing 3.50 mm thick glass panes including wooden beading complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):2nd class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 35mm

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick 1st class kail wood.

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm &mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqmu pto 5.00 sqm).

Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)incld. carriage

Providing and applying Plaster of Paris putty of 1mm thickness over plastered surface to prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement prime

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. 13.94.1 New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer?in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)

Providing and fixing finished brass hanging type floor door stopper with necessary screws etc complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size and all sort of carriage complete

Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: Raj Nagar plain 16mm

Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

wProviding and fixing water closet squatting pan (Indian type W.C pan) with 100mm P or S trap, 10 litter low level white PVC flushing cistren , including flush pipe, with maniualy controlled device (handle lever) coforming to IS 7231 with all fittings and and fixture complet, including cutting and making good the walls and floors wherever required, white viretous Chaina Orisa pattren WC pan of size 580x440 mm with intergal type foot rests

Providing and fixng white vitreous china pedestal type water closet (European type W.C. pan) with seat and lif 10 litre low level white P.V.C flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231 with all fittings and fixtures, complte including citting and making good the wallsISI marked white solid plastic seat and lid.

Providing and fixing wash basin with white vitreous chaina padestal with CI breakets 15mm C.P brass pillar trap,32mm C.P brass weast of stranded prttern, including fittings of and brakets cutting and making good the wall and wherever required,white vitreous Chaina wash basin size 630 x450 mm with a pire of 15mm CP brass Pillar Trap.

P/fixing mirrors of superior glass with plastic moulded frame of approved quility and shape with 6mm thick hard board backing Rectangular shape 1500 x450mm.

Providing and fixing soil, waste and vent pipes and fittings:

PVC Pipe. 100mm dia (10feet long)

PVC Pipe. 75mm dia (10feet Long)

PVC Bend 110mm dia

PVC Bend 75mm dia

PVC Tee 110mm dia

PVC Tee 75mm dia

PVC Collar 110mm dia

PVC Collar 75mm dia

PVC trap 110mm dia

PVC trap 75 mm dia

PVCsoket 110 mm dia

PVC soket 75 mm dia

PVC door junction 110 mm dia

PVC door junction 75 mm dia

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in?charge.

PN-16 pipe , 25mm OD(SDR-7.4)

PN-16 pipe , 32mm OD(SDR-7.4)

P/F toilet paper holder including cost of wodden PVC play etc.

Providing and fixing wall mount Liquid soap dispenser of approved brand.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.450 mm long towel rail length of 495 mm ,78 mm wide and effective height of 88 mm weighing not less than 170 gms.

15mm c.p brass tap with elbow operation level

15 mm c.p brass 2 in 1 tap

Providing and fixing 50 ltr Gyser including all fixture complete.

Providing and fixing acessories of standard and qulity make of approved manufacture including all necessary fixture required

L-Drops for room door

L-Drops for Windows

Handles for door

Handles for window

Handles with lock system of main doors ( Godrej Make)

Providing and installation of PUF ( PUF insulated Tanks) water tank capacity 1000 ltrs of approved brand 9 syentex or any other approved brand) as per direction engineer incharge.

Supply and installation of High quality self regulating heat tracer for Specialized heating solutions for Winterisation of water pipe line including all accessories complete including supply and installation of circuit control panel with RCBO MCB,Thermostate (0-120) DEGC ,power connector,W.P. tee connector end seal, mounting kit -W.P. jb,g.i. pipe steap 4" aladhesive tape roll (50mm w x20m l) f.g adhesive tape roll (Danfoss Make or chomalox any other approved brand as per direction of site engineer)

Supplying and fixing High Quality 32 mm thick Nitrile insulation tube for water pipeline of approved brand 2 inch size (Armaflaex class-0 Armacell) including alumunium duct clading of approved quality and finishAS PER THE DIRECTION OF SITE ENGINEER.

Providing and fixing ornamental shingstak (Ladakhi wood carving over exterior windows and main entrence door) Design as per the direction of engineer in charge) including polishing all complete

Providing and laying 4.5 mm stag flooring including shock absorbing ,Anti skid,Tear resistant Abrasion resistant ,easy to maintain, Re-inforced layer for dimensional stability.

M/S AKSAF CONSTRUCTION COMPNY KARGIL

M/S TOHA AND CO

MS Sujad Hussain

A.b construction

MS HAJI HADI

TASHI FALGON

M/s Niyaz Ali

M/S ABDUL GAFFAR

m/s mohammad javeed