Mplads 2026-27

Name of the work:-Construction of a Multipurpose Activity centre in the BC area of Teeparru village in Peravali (M), Est.Rs.25.00 Lakhs, Mplads 18 th. LS Funds Auguring and boring holes different diametres 7 depth with double under-ream for cast in situ piles in hard black soils and other ordinary soils as per IS 2911-1980 and as per approved design,including shoring,shuttering,sheeting,planking and dewatering etc.including cost and conveyance of all materials and all labour charges and tools and plants etc.complete for finished item of work and putting reinforced cement concrete M 25 grade design mix using a minimum quantity of 380 kgs.of cement per 1 cum of concrete usinh Weigh batcher/mixer using 20 mm gauge SS5 graded hard granite machine crushed metal aggregate (coarse aggregate0 from approved quarry including cost and conveyance of all materials like cement,fine aggregate (sand) coarse aggregate water etc.to site and cost of all materials ,including watering,machine mixing,laying concrete etc,complete but excluding cost of steel and its fabrication charges etc.complete for finished item of work.for 300 mm dia and 3.50 mts depth.

Auguring and boring holes different diametres 7 depth with double under-ream for cast in situ piles in hard black soils and other ordinary soils as per IS 2911-1980 and as per approved design,including shoring,shuttering,sheeting,planking and dewatering etc.including cost and conveyance of all materials and all labour charges and tools and plants etc.complete for finished item of work and putting reinforced cement concrete M 25 grade design mix using a minimum quantity of 380 kgs.of cement per 1 cum of concrete usinh Weigh batcher/mixer using 20 mm gauge SS5 graded hard granite machine crushed metal aggregate (coarse aggregate0 from approved quarry including cost and conveyance of all materials like cement,fine aggregate (sand) coarse aggregate water etc.to site and cost of all materials ,including watering,machine mixing,laying concrete etc,complete but excluding cost of steel and its fabrication charges etc.complete for finished item of work.for 300 mm dia and 3.50 mts depth.

Earth work excavation for foundations (Manual Means of buildings,Septic tank,Sump,compound wall in ordinary soils and depositing on bank with an initial lead of 10 m and depth up to 3m including all operational, incidental ,labour charges such as shoring,sheeting,planking,strutting etc.and overheads 7 contractors profit complete for finished item of work excluding dewatering charges etc.as per ss 20 b (APSS 3080 but excluding GST and seignorage charges.

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering.for Pile Caps.

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering.for Plinth beams.

Brick Masonary for panel walls with CM (1:6) prop;(cement,screened sand0 using common burnt clay bricks of class as per Table-1 of Is: 1077-1992, Non-Modular or traditional size 23x11x7 cms from approved source having minimum crushing strength of 40 kg/cm2 including cost and conveyance of all materials like cement,screened sand,bricks,water etc.to site including sales sales and other taxes on all materials and such as labour charges,like mixing cement mortar,scaff folding charges,constructing masonary,lift charges curing etc.and over heads & contractors profit complete for finished item of work (APSS No.501 & 504) but excluding GST,seignorage charges,up to Basement.

Supply and filling of Stone Dust in trenches,sides of foundations and basement with initial lead in layers not exceeding 15 cm thick,consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational,incidental,labour charges,hire charges of T&P etc.complete for finished item of work (APSS NO.309 & 3100 including cost and conveyance of all materials and labour charges,and contractors profit & over heads but excluding seignorage charges and GST etc.complete.

Plain Cement Concrete in (1:4:8) proportion nominal mix (Cement : fine aggregate;Coarse aggregate) using 40 mm size HBG SS5 machine crushed metal with concrete mixer including cost and conveyance of all materials like cement,sand 9unscreened),coarce aggregate,water etc.to site,all operational.incidental,and labour charges such as mixing,laying and ramming concrete in layers in position not exceeding 15 cm ,finishing top surface,curing concrete,over headcharges & Contractors profit etc.complete but excluding GST & Seignorage charges for finished item of work for Foundations. (APSS NO.402)

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering.for Columns..

Brick Masonary for panel walls in super structure with CM (1:8) prop;(cement,screened sand0 using common burnt clay bricks of class as per Table-1 of Is: 1077-1992, Non-Modular or traditional size 23x11x7 cms from approved source having minimum crushing strength of 40 kg/cm2 including cost and conveyance of all materials like cement,screened sand,bricks,water etc.to site including sales sales and other taxes on all materials and such as labour charges,like mixing cement mortar,scaff folding charges,constructing masonary,lift charges curing etc.and over heads & contractors profit complete for finished item of work (APSS No.501 & 504) but excluding GST,seignorage charges.

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering.for Lintels..

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering.for Sunshades.

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering.for Roof Beams..

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering.for Roof Slab.of 125 mm thick.

Providing Impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop.using screened sand 12 mm thick !average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 kg per one bag of cement,laid over roof slab when it is green,finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45 cmx45 cm including cost and conveyance of all materials like cement sand,water proofing compound,water etc.to site including sales & other taxes on all materials and operational,incidental,and labour charges for mixing mortar,laying,lift charges.rendering smooth and thread lining,curing including rounding off junctions of wall and slab etc.and overheads & contractors profit complete for finished item of work (APSS No.901 & 903) but excludingGST,Seignorage charges

Ornamental ceiling plastering 8 mm thick single coat in CM (1:3) using screened sand including cost and conveyance of all materials like Cement,Sand,water etc.to site including sales and other taxes on all materials,and all operational,incidental charges on materials and including cost of all labour charges for mixing mortar,finishing,curing as directed by Engineer-in-charge etc.and overheads & contractors profit complete for finished item of work (SS 901,903 &904) but excluding GST,seignorage charges .

Plastering 12 mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like Cement,Sand,water etc.to site including sales and other taxes on all materials,and all operational,incidental charges on materials and including cost of all labour charges for mixing mortar,finishing,curing as directed by Engineer-in-charge etc.and overheads & contractors profit complete for finished item of work (SS 901,903 &904) but excluding GST,seignorage charges for Super structure for inside wall surfaces.

Providing and fixing factory made solid Wood Polymer Composite (WPC) singl extruded Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine.The ready / assembled door frame is fixed to the wall using hold fast or bolt fasteners.Aminimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.

Supply and fixing of Flush door shutters, solid bond wood block board type with teak ply on both faces.: 25 mmthick conforming to IS:2202 of size 1.20 x 2.10 mt including cost and conveyance of all materials and labour charges as per specifications (APSS NO.1001 & 1002)

Providing and fixing factory made UPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of UPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made.

Supplying, Fitting and placing HYSD Bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded

Cost and supply of MS Grills with MS flats and squares including cost and conveyance to work spot and fabrication charges of steel like cutting rods, welding grills placing in position etc., complete.

Cost,and supply&fixing of R.C.C Ventilators including cost and conveyance of all materials and labour charges etc complete.

Flooring with virtified polished Floor Tiles of ! St quality and make as approved by Engineer in charge of size not less than 598 mm x 598 mm, 8 mm thickness regular finish and normal colours with borders and design as per the approved flooring pattern as directed by the Engineer-in-charge,laying tiles using spacers of 2mm thick set over a base coat of CM (1:8) prop,12 mm thick using screened sand over CC bed already laid on RR roof slab,including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed neatly with white cement paste to full depth mixed with pigment of matchingshade including cost and conveyance of aa materials like cement,sand,water,tiles,white cement etc.to site (excluding cost of CC bed) including cost of all materials,cost of base coat and all labour charges for mixing of cement mortar,laying tiles to required slope as directed by the Engineer-in-charge etc.and over heads & contractors profit but excluding seignorage charges & VAT complete for finished item of work (APSS NO.701 & 707)

Painting to New walls with 2 coats of Acrylic emulsion paint of approved brand and shade over a primery coat making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and and remains of loose powdered materials including cost and conveyance of all materials to work site and all operational charges etc complete for finished item of work for External walls..

Painting to New walls with 2 coats of Acrylic emulsion paint of approved brand and shade over a primery coat making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and and remains of loose powdered materials including cost and conveyance of all materials to work site and all operational charges etc complete for finished item of work for internal

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying kniffing paste filler by putty knife/muslin pad, air dry for 2-3 hours, sand with 180 and 320 No, emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work Internal Walls

Supply and fixing of 20mm outer dia 2.00 mm thick Heavy grade with IS:9537 part 3 FRLS regid PVC pipe (ISI MARK) concealed in Roof Slabs with all required MS deep boxes and all accessories including and labour charges etc., complete. Makes : Sudhakar

Supply and Fixing of 25mm outer dia Medium grade ( 2.00 mm Thick ) with IS:9537 part 3 FRLS regid P.V.C. pipe (ISI MARK) concealed in wall with all required MS Deep Boxes and all accessories including masonary work for light, fan and separate plug point with MS modular switch box including all labour charges etc., complete. for EPABX, LAN, and CCTV, Run of mains, light, fan points. Makes : Sudhakar

Wiring with 2 runs of 22/0.3mm (1.00 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and Modular cover frame to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings Make of COPPER FLEXIBLE CABLES (AS PER IS:694) - Category I (ELEC-1.5.1.a) : Goldmedal Make of MODULAR SWITCHES AND ACCESSORIES - Category II (ELEC-1.8.2) : Goldmedal (Curve/Air) Make of CEILING ROSE 3 plate - Gold Medal Olive Make of MODULAR COVER FRAMES - Category II (ELEC-1.8.4) : Goldmedal (Curve/Air)

Supply and run of 1 of 14 /0.3mm (1.5 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for Earth continuity including all labour charges etc., complete.

Supply and run of 2 of 56/0.3mm (4 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe For Mains inlcuding all labour charges etc., complete. Make of COPPER FLEXIBLE CABLES (AS PER IS:694) - Category I (ELEC-1.5.1.a) : Finolex /Polycab

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Make of Modular Switches - Category II (ELEC-1.8.2): Goldmedal (Curve/Air)

Supply and Fixing of 16A or 20A, Modular socket with 16A or 20 A switch control modular type with front cover plate including all labour charges etc., complete. Make of Modular Switches - Category II (ELEC-1.8.2):Goldmedal (Curve/Air)

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete with Earth Connection and not Less than Two Years warranty. LED BATTEN LIGHT MAKE - CATEGORY- I (ELEC-3.8.13) : GoldMedal

Supply and transportation of 20W LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass/ temperature protective polycarbonate diffuser, supply input voltage 120 - 270V AC, P.F > 0.90, high power LEDs having System Efficacy >=120 lumens/watt and junction temperature < 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec- 3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I

Supply and fixing of Batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 7 W LED bulb (for new installation). Makes of PVC batten holder : GM G Home / Gold Medal Olive / Million Zoom /Vimal opel/ Anchor/Vihan/ Havells Reo Makes of Bulb : Phillips /Crompton / Bajaj / Havells / GM/HPLSyska / GoldMedal.

Supply of 48" (1200mm) Sweep star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator. Makes( ELEC-5.1.3 ) : Crompton HS Plus

Supply and Fixing of 2 Module Modular type Electronic step type Fan Regulator. CATEGORY- II Make of Fan Regulator : Goldmedal (Curve/Air)