Renovation-Repair to AWC -Agan Wadi Centre building at Dharapgarh, AWC-A at Gandapatrapali and completion of incomplete AWC building of Badmal including electrification works under CSR 2025-26.

Amount

Renovation/Repair to AWC (Agan Wadi Centre) building at Dharapgarh, AWC-A at Gandapatrapali and completion of incomplete AWC building of Badmal including electrification works under CSR 2025-26.

Demolition reinforced cement concrete roof and removing from the premises to a distance of 100mtr.

Surface excavation (Soft/Loose soil) not exceeding 30 cm deep and averaging 15cm deep and getting out.

Excavating over areas(Soft/loose soil) n exc 1.5 m deep and getting out.

Excavating in trenches (Soft/loose soil) n exc 1.5 m wide and n exc 1.5 m in depth for foundation.

Surface dressing n exc 15 cm deep. ( Hard/dense soil)

Sand filling under floors or in foundations including watering and consolidation.

M&L, for loose filling with aggregates (Broken bricks) of gauge 80 to 150 mm in inaguartion stone box made of brick wall.

M&L, for anti termite treatment in the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area.

Material & Labour,for Cement concrete Type B1, M15 1:2:4 (20mm graded aggregate) in foundations.

Material & Labour,for Cement concrete Type B2, 1:2:4 (40mm graded aggregate) in foundations.

M&L, for Providing, cement concrete type B1, 1:2:4 (20mm graded aggregate) in copings, water troughs including for use of form work.

M&L, for precast reinforced cement concrete cover slabs (for man holes) Type B1,1:2:4 (20mm graded aggregate) and set in 1:4 cement mortar including for use of form work.

M&L, for Providing precast cement concrete jallies, 35mm thick , including all mould ings. Type Bo,1:2:4 (12.5mm graded aggregate)

M&L, for reinforced cement concrete M20 (1:1½:3) 20mm graded aggergate in foundations, including plinth beams, bases for columns.

M&L, for reinforced cement concrete slab M20 (1:1½:3) 20mm graded aggergate supported on walls,beams and columns in floors,roofs etc.

M&L, for reinforced cement concrete chajja M20 (1:1½:3) 20mm graded aggergate supported on walls,beams and columns in floors,roofs etc.

M&L, for Reinforced cement concrete Beams, cantilevers, lintels over 1.5m span, M-20 grade, 1:1½:3, (20mm graded aggregate)

M&L, for Reinforced cement concrete column, M-20 grade, 1:1½:3, (20mm graded aggregate)

Supply & mixing liquid water proofing compound @200ml/Cement bag or as per specificationof manufacturer.

M&L, for Brickwork with fly ash bricks, straight on plan, built in 1:6 cement mortar.

M&L, for half brick thick walls with flyash bricks, straight or curved on plan to any radius, built in 1:4 cement mortar.

M&L, for Brickwork with fly ash bricks in one brick thick honey-comb walling, built in 1:4 cement mortar.

M&L, for Formwork to sides of concrete foundations, footings, bases of columns, sides and soffits (if any) of foundation and plinth beams.

Material & labour , for Formwork to soffits of roof slabs with rough finished surface.

Material & labour , for Formwork to sides and soffits of roof beams with rough finished surface.

M&L,for Formwork to chajjas of rough finished.

M&L, for Formwork to sides of pillars of rough finished surfaces and of square or rectangular.

S&F, for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube.

S&F, for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site .

S&F, for 100mm size Extruded aluminium alloy handles, fabricated type, anodised.

S&F,for 200mm size Aluminium anodised, barrel tower bolts of ex truded section.

S&F, for 100mm size Butt hinges, medium weight, cold rolled mild steel.

S&F, for mild steel grills, gates, windows, barred iron doors etc. conforming to Fe.290.Gde-E-165.

Material & labour , for mild steel bars 10mmdia and over, cut tolength, bent to shaperequired, including cranking, bending spirally for hooping for beams, hookingends and binding with and including mild steel wire(annealed) not lessthan 0.9mm dia. Or securing with clips. MAKE TATA/SAIL/JINDAL PANTHER

Ditto, but 5mm dia. and over upto and including 10mm dia in stirrups.

M&L, for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces over primed surface by forced application and laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm)

M&L, for Cement concrete floor of 100mm thick, type B-1, 1:2:4 (20mm graded aggregate) including for Use and waste of form work/screed strips,finishing surfaces of concrete topping even and fair (without using extra cement)

M&L, for 40mm thick cement concrete flooring type B-0, 1:2:4 (12.5mm graded aggregate) including use and waste of form work/screed strips and finishing surfaces of concrete topping even and fair (without using extra cement).

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. Brushing neat cement slurry with 3.0kg of cement per sq. metre

S&F, Non - skid Ceramic colored tiles 7 to 8 mm thick,area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. over screed bed or bedding layer of 15mm thick of 1:4 cement mortar, set and jointed in neat cement slurry and pointed in white or coloured cement to match. Make KAJARIA/ SOMANY/ HR JOHNSON / CERA SANITARY WARE LTD./ ASIAN GRANITO / ORIENT BELL/ HSIL/ NITCO

Supply and fixing, for Vitrified Ceramic colored tiles 8 mm or over thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. over Screed bed or bedding layer of mortar 15 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match.

S&F, for Glazed ceramic colored tiles in vertical surface of size 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match. Make KAJARIA/ SOMANY/ HR JOHNSON / CERA SANITARY WARE LTD./ ASIAN GRANITO / ORIENT BELL/ HSIL/ NITCO

Material & labour,for rendering 10mm thick cement plaster on fair faces of concrete surfaces.

Material & labour,for rendering 5mm thick cement plaster on fair faces of concrete surfaces.

M&L, for rendering 12mm thick cement plaster on fair faces of brick wall surfaces.

M&L, for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in 1:4 cement mortar.

S&F, 600mmX600mmX20mm thick Granite stone (of any type) table rubbed,fixed over 20mm thick screed bed of cement mortar (1:4) and polished, grooving letters of any numbers finished with golden colour.

M&L, for preparing new plastered surfcaes wall, Chalk whiting, on plastered surfaces, preparatory to white washing and applying two coat of white wash

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior int of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. MAKE ASIAN/BERGER/NEROLAC

Preparation of old plastered or unplastred wall/ceiling surfaces by brushing with steel wire brush, scraping down smoke soot, mould moss efflorescent salt, treating oil and applying two coats of distemper oil emulsion as per the direction of E-in-C.

M&L, for applying two coat of synthetic enamel paint on steel surfaces over a priming coat of red oxide.

Supply and labour for applying one coat of heat resisting paint over APP based polymeric membrane .

S&F, for 1000 ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in MES SSR Part I-2009 including for 25mm dia. ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule. Make SINTEX/SUPREME/PLASTO

S&F, for 25mm dia low density polyet hylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. Make KASTA/SUPREME/FINOLEX/ASTRAL LTD./ASHIRVAD PVT.LTD./DUTRON/PRINCE

Ditto but 20mm dia LDPE pipes.

Supply & fixing 20mm dia. bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms).

M&L, for 20mm dia. stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm-92gms) .

M&L, for Water closet (Squatt pattern) complete including provision of cement concrete bedding,setting the trap and pan in cement concrete (1 cement, 2 sand and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated), PVC connections 15mm size with PTMT nuts of length 300mm, 10 ltr capacity PVC valveless, syphonic action type, flushing cistern,flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern low level, white, with inlet, ball valve, float and handle including brackets.MAKE CERA/PARRYWARE/HINDWARE/JAGUAR/KOHLER

S&F, 75mm dia. PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor. Make KASTA/SUPREME/FINOLEX/ASTRAL LTD./ASHIRVAD PVT.LTD./DUTRON/PRINCE

S&F, for Vitreous China Urinal, Half stall type, white,PVC connections 15mm size with PTMT nuts of length 300mm, MAKE CERA / PARRYWARE / HINDWARE / GAGUAR / KOHLER

S&F, 75mm dia. PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

S&F, 75mm dia. PVC (SWR) bends any radius

M&L, for Concrete bed to 100mm dia. drain pipes including forming cradles in cement concrete 1:3:6, Type-C2

S&F, for 75mm dia. PVC (SWR) vent cowl.

Providing and laying Vitrified tiles in floor (Size of Tile 600 x 600 mm) (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (MAKE FOR VITRIFIED TILES: JOHNSON / KAJARIA / SOMANY / NITCO /ORIENT BELL), (MAKE FOR ADHESIVE: MYK LATICRETE / ROFF / PIDILITE).

Supply & fixing of 6 to 32 Amp rating,Single Pole, 240 V, 10KA 'C' Curve miniature circuit breaker (MCB) in the existing MCB DB complete with connection, testing & commissioning.The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab etc.

Supply & fixing of 40A, 30mA, Double Pole RCCB for earth leakage protection. The material shall be of ISI marked. Make- Havells, V-Guard, Polycab, Anchor, Legrand, Siemens

Cutting chases for concealed conduit wiring etc. and making good, cutting not exc 10 cm girth.

Material & Labour for one light or one fan point wiring in PVC conduit with 1.5 sq.mm single core FRLS copper conductor cables to be controlled by one switch. The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab etc.

Material & Labour for circuit/submain wiring alongwith earth wire with 2 x 1.5 Sq. MM + 1 x 1.5 Sq. MM Earth Wire of FR PVC Insulated copper conductor, single core cable in PVC conduit in recessed as required. The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab etc.

Material & Labour for circuit/submain wiring alongwith earth wire with 2 x 4 Sq. MM + 1 x 4 Sq. MM Earth Wire of FR PVC Insulated copper conductor, single core cable in PVC conduit in recessed as required. The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab etc.

Material & Labour for circuit/submain wiring alongwith earth wire with 2 x 2.5 Sq. MM + 1 x 2.5 Sq. MM Earth Wire of FR PVC Insulated copper conductor, single core cable in PVC conduit in recessed as required. The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab etc.

Material & Labour for Ceiling rose, 3 Phase/ 3 Pin, PVC/Polycarbonate, Isolated Body. The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab etc.

Supply & fixing of modular switches 1 Way, 6 Amp, 1 Module in the existing switch board including connectio & testing. The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab etc.

Supplying & fixing of 2/3 Pin, 6 A, Combined Socket , 2 Module.The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab etc.

Supply & fixing of modular switches 1 Way, 16 Amp, 1 Module in the existing switch board including connectio & testing. The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab etc.

Supplying & fixing of 2/3 Pin, 6 A/16A Combined Socket , 2 Module.The material to be used shalle of ISI marked & of reputed make like Legrand, Havells, V-Guard, Polycab etc.

Material & Labour for modular white cover plate with frame, 2 Module. The material to be used shall be of ISI marked or conforming to relevant IS & of reputed make like Legrand, Havells, V-Guard, Polycab etc.

Material & Labour for modular white cover plate with frame, 3 Module. The material to be used shall be of ISI marked or conforming to relevant IS & of reputed make like Legrand, Havells, V-Guard, Polycab etc.

Material & Labour for modular white cover plate with frame, 4 Module. The material to be used shall be of ISI marked or conforming to relevant IS & of reputed make like Legrand, Havells, V-Guard, Polycab etc.

Material & Labour for modular white cover plate with frame, 12 Module. The material to be used shall be of ISI marked or conforming to relevant IS & of reputed make like Legrand, Havells, V-Guard, Polycab etc.

Material & Labour for Modular Metal Flush Box, 2 Module. The material to be used shall be reputed make like Legrand, Havells, V-Guard, Polycab etc.

Material & Labour for Modular Metal Flush Box, 3 Module. The material to be used shall be reputed make like Legrand, Havells, V-Guard, Polycab etc.

Material & Labour for Modular Metal Flush Box, 4 Module. The material to be used shall be reputed make like Legrand, Havells, V-Guard, Polycab etc.

Material & Labour for Modular Metal Flush Box, 12 Module. The material to be used shall be reputed make like Legrand, Havells, V-Guard, Polycab etc.

Supply & fixing of 1 x 20 Watt, 220 V AC, LED Light fittings with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make of LED Light fittings to be provided shall be of Phillips/Bajaj/Havells, Syska.

Material & Labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or buried in ground or drawn in conduit pipe for loop earthing etc. as required with 4mm dia galvanized iron wire.

Supply & fixing of exhaust fan, steel body AC single phase, 230 V, 300MM Sweep with Blades & Frame and Louvers.

Supply & fixing of fans complete with blades, down rods, eletronic regulator and accessories, 230 V, 1200 MM Sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five Star rated with brushless direct current motor (BLDC).

Supply & fixing of 60 Watt LED Street light fittings, 230 V AC, outdoor type with high pressure die cast aluminium housing and heat resistant complete driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. It also includes suitabe GI bracket and clamps for fixing the street light fittings on the wall. Make: Syska/Surya/Bajaj/Phillips/ Havells/Crompton

Supplying & fixing of 6 way double door, single pole neutral sheet steel MCB distribution board, 240 V, on surface/recess, complete with neutral bus bar, earth bus bar, din rail, powder painted including interconnection, testing & earthin etc. as required. It includes wall cutting & making good the same for fixing of above MCB distribution board. The material to be used shall be reputed make like Legrand, Havells, V-Guard, Polycab etc.

Material & Labour for earthing with GI earth Pipe of 4.5 Meter Long, 40 MM Dia Including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.This also includes earth excavation, earth pit chamber construction and earth refilling.

Supply & fixing of 300MM Sweep Wall Mounted Fan, 230 V, 50 Hz, Oscillating Type, Variable Speed with Pull Cord. Make: V-Guard, Bajaj, Havells, Crompton

M & L for digging of 350 Feet Deep Borewell including insertion of HDPE pipe & 1 Set of 1 HP, 12/16 Stage submerssible water pump including Water Pipe: 350 Feets, Submerssible Power Cable: 200 Feets, 1 Set of Pump Starter with Water Level Controller. It includes requisite minor civil works to provision the water pump in existing Tubewell. The material to be used shall be reputed make & should be conforming to relevant IS.

SUJIT KU DANG (BID ID -897543)

RAJESH KUMAR PATRA (BID ID -897537)