REPAIR/MAINTENACE OF GEYSER, CEILING FANS,EXHAUST FANS AND WALL MOUNTED FAN UNDER AGE EM OF GE (KH) YOL CANTT

Amount

Taking down water storage heater of 25/35 liters capacity from electric socket and disconnecting from PVC connection and screw down kept aside for reuse at same / different location after cleaning of geyser tank , refixing the same duly grouting nuts, bolts washers and connecting to existing water connection complete, all as specified and as directed by Engineer-in-Charge. complete all as specified. Note :- Unserviceable part shall be measured and replaced separately under respective items.

Supply and replacement of heating elements 2KW 230V ISI marked round base suitable for water heater of any type including connection with suitable cable complete, all as specified and directed by Engineer-in-Charge. Make:-Theeta/Racold/Airex

Supply and replacement of heating elements 2KW 230V ISI marked triangular base suitable for water heater of any type including connection with suitable cable complete, all as specified and directed by Engineer-in-Charge. Make:-Theeta/Racold/Airex

Supply and replacement of heating elements 1.5KW 230V ISI marked triangular base suitable for water heater of any type including connection with suitable cable complete, all as specified and directed by Engineer-in-Charge. Make:-Theeta/Racold/Airex

Supply and replacement of heating elements 3KW 230V ISI marked suitable for instant water heater of any type including connection with suitable cable complete, all as specified and directed by Engineer-in-Charge. Make:-Theeta/Racold/Airex

Thermostat switch for geyser, 230 Volts, 0 degree to 90 degree centigrade temprature range to be set at 70 degree to 50 degree centigrade, ISI Marked 7 inch length suitable for hot water heater of capicity 25/35/50 liters fixed in repair complete all as specified.Make:-Theeta/Racold/Airex

S&F in replacement of defective steel inner tank of 25 Litre capacity geyser tank made out of steel sheet 2 mm thick suitable for 6 hole assembly complete, all as specified and as directed by Engineer-in-Charge.

S&F in replacement of defective steel inner tank of 25 Litre capacity geyser tank made out of steel sheet 2 mm thick suitable for 9 hole assembly complete, all as specified and as directed by Engineer-in-Charge.

S&F in replacement of defective steel inner tank of 35 Litre capacity geyser tank made out of steel sheet 2mm thick suitable for 6 hole assembly , complete, all as specified and as directed by Engineer-in-Charge.

S&F in replacement of defective steel inner tank of 35 Litre capacity geyser tank made out of steel sheet 2mm thick suitable for 9 hole assembly , complete, all as specified and as directed by Engineer-in-Charge.

PVC Connection, heavy duty, for hot and cold water, with brass nuts 15mm dia with washer, 450mm long suitable for geyser, fixed in repair complete all as specified.

S & F in repair Air release valve 15mm dia for geyser 25/35/50 liters capacity all as specified and directed.

S&F in repair fusiable plug of brass 15mm bore for geyser 25/35/50 liters all as specified and directed.

S&F in repair drain plug for wash out line of made brass for geyser 25/35/50 liters all as specified and directed.

Indicator lamp flush type (red/ Green) 230V suitable for water heater fixed in repair complete all as specified.

S&F in repair siphon assembly made out of brass of 25 /35 ltrs (9 hole) capacity geyser including necessary studs, screws and rubber gasket/washers complete all as specified and directed.

S&F in repair siphon assembly made out of brass of 25 /35 ltrs (6 hole) capacity geyser including necessary studs, screws and rubber gasket/washers complete all as specified and directed.

S&F in repair siphon assembly (as per sample exist in ground of make recold geyser) inbulid with geyser element and thermostat made out of brass of 25 ltrs capacity geyser including necessary studs, screws and rubber gasket/washers complete all as specified and directed.

Replacement of insulation material ( Glass Wool, 25 mm thick ) for geysers 25-50 ltrs capacity complete all as specified .

Repair to geysers inner water tank of 25 to 50 ltrs capacity by gas welding / brazing for water tightness complete all as spd and directed by Engr - in - Charge.

PVC insulated copper (Flexible) conductor PVC sheathed three core 1.50 sq mm, fixed in repair, complete all as specified.

Replacement of old unserviceable anchor bolt 12mm x 100mm long complete all as specifed and directed (Note - Anchor bolt shall be grouted with hammer drill only).

Painting of Geyser after due preparation of surface complete at site with super enamel synthetic white paint by spray painting machine including filling cavities with filler, one coat after cleaning all dust etc . complete all as specified and directed by Engineer-in-Charge.

Taking down ceiling fan of any sweep, any size/make from existing position of any height by disconnecting electrical connections and transporting to workshop. Inspection of ceiling fan in presence of Engrs- in - charge/JE (or rep of department) after dismentling spares parts. Transporting ceiling fan back from work shop to site including hanging/ fixing and connecting up etc complete all as required at site and directed by Engr - in - Charge.

M&L for complete repair and maintenance of unserviceable ceiling fan of 1200mm/1400mm sweep at work shop, incl dismantling complete the ceiling fan parts i.e. blades, fan rod, canopy, connection, inspecting serviceability of all the parts, re fixing of serviceable parts after cleaning and replacement of unserviceable parts with company's genuine parts i.e. capacitor, bearing, bushes, shaft, bracket, rubber bush, connecting wire, PVC connector, aluminium clamp for rod, bracket, bush rod, blade and greasing/oiling etc assembling, cleaning and testing of ceiling fan as directed. Note: (i) Unserviceable parts as above shall be measured and paid separately under relevant items of Sch 'A' as supply only. (ii) Rewinding of stator will be measured & paid for separately under relevant item of Sch 'A'. (iii) Writing of MES Nos and painting of ceiling fan shall be measured & paid separately uner relevant item of Sch 'A'. (iv) A register will be maintained by the contractor for record of repair duly signed by JE and Engr-in-Charge & contractor. (v) Cost of minor part i.e. Cotterr pin, PVC connector, screws shall deemed to be included in the quoted rate.

Removing of old burnt winding wiring any type, cleaning stator complete for burnt wiring, carbon residue and rewinding of stator winding of any type/any make fan/ any stator design ceiling fan of 1200mm sweep with superior quality super enameled winding copper wire of existing specification, gauge and weight with superior quality insulation for satisfactory functioning fan in presence of JE incharge complete all as directed by Engr-in-Charge

Supply only ball bearing of existing number suitable for ceiling fan 1200/ 1400mm sweep of approved makes including necessary greasing complete all as specified and directed. Make : NBC/ SKF/FAG

Supply only gun metal bush of existing size suitable for 1200/ 1400mm sweep ceiling fan complete all as specified and directed.

Supply only capacitor 2.5 MFD complete all as specified and directed.MAKE- USHA/Havells/Epcos/BAJAJ

Supply only capacitor 4 MFD complete all as specified and directed.MAKE- USHA/Havells/Epcos/BAJAJ

Supply only down rod 15mm bore, 300mm long fixed one end with mild steel U clamp, nut, lockable bolt, rubber reel, lock pin and other end having threaded/ drilled hole end, suitable nut, bolt, split pin and check nut or aluminium clamp duly white painted suitable for all size and makes of ceiling fan complete all as specified and directed.

All as per Srl Item No. 31 here-in-before but 450mm long

Supply only blade of 1200mm sweep of ceiling fan complete all as specified and directed.

M&L for painting one coat of synthetic enamel paint (white) using spray machine painting on the surface of ceiling fan of 1200/ 1400mm sweep (Including blade) complete after preparation of surface i.e cleaning, washing of surfaces filling cavities with filler, cleaning dust and writing MES No. complete , all as specified and directed by Engr-in-Charge

Supply only U clamp/ brass bracket assy with rubber reel with nuts, bolt 10mm dia, lock/ split pin, washer suitable for ceiling fan clamp complete all as specified and directed.

Supply only top and bottom canopy of plastic with steel screw suitable for rod for fan of 1200/ 1400mm sweep complete all as specified and directed.

Supply only ceiling fan stamping suitable for ceiling fan 1200mm complete all as specified and directed.

Taking down wall mounted fan of any sweep, any size/make from existing position of any height by disconnecting electric connections and transporting to workshop. Inspection of ceiling fan in presence of Engr- in - charge/JE (or rep of department) after dismentling spares parts. Transporting wall mounted fan back from work shop to site including hanging/ fixing and connecting up etc complete all as required at site and directed by Engr - in - Charge.

M&L for complete Repair and maintenance of unserviceable wall mounted fan of any sweep at work shop, including dismantling complete the parts i.e. blades, fan cover, connection, inspecting serviceability of all the parts, re fixing of serviceable parts after cleaning and replacement of unserviceable parts with company's genuine parts i.e. capacitor, bearing, bushes, shaft, Plastic blades ,connecting wire, PVC connector and greasing/oiling etc assembling, cleaning and testing of wall mounted fan as directed. Note: (i) Unserviceable parts as above shall be measured and paid separately under relevant items of Sch 'A' as supply only. (ii) Rewinding of stator will be measured & paid for separately under relevant item of Sch 'A'. (iii) Painting of ceiling fan shall be measured & paid separately uner relevant item of Sch 'A'. (iv) A register will be maintained by the contractor for record of repair duly signed by JE and Engr-in-Charge & contractor. (v) Cost of minor part i.e. Cotterr pin, PVC connector, screws shall deemed to be included in the quoted rate .

M&L for rewinding stator of wall mounted fan 300 mm sweep with super enameled copper winding wire of existing specification, gauge and weight including insulating material complete all as specified and directed

Supply only ball bearing of wall mounted fan suitable for 300mm sweep as per existing ball bearing including necessary greasing complete all as specified and directed.NBC/SKF/FAG Norma

Supply only of plastic blade complete set suitable for wall mounted fan upto 300mm sweep complete all as specified.

Taking down carefully exhaust fan of any sweep, any size/make from existing position of any height by disconnecting electric connections and transporting to workshop. Inspection of ceiling fan in presence of Engr- in - charge/JE (or rep of department) after dismentling spares parts. Transporting exhaust fan back from work shop to site including hanging/ fixing and connecting up etc complete all as required at site and directed by Engr - in - Charge.

M&L for complete Repair and maintenance of unserviceable exhaust fan of any sweep at work shop, including dismantling complete the parts i.e. blades, fan cover, connection, inspecting serviceability of all the parts, re fixing of serviceable parts after cleaning and replacement of unserviceable parts with company's genuine parts i.e. capacitor, bearing, bushes, shaft, connecting wire, PVC connectorand greasing/oiling etc assembling, cleaning and testing of exhaust fan as directed. Note: (i) Unserviceable parts as above shall be measured and paid separately under relevant items of Sch 'A' as supply only. (ii) Rewinding of stator will be measured & paid for separately under relevant item of Sch 'A'. (iii) Painting of ceiling fan shall be measured & paid separately uner relevant item of Sch 'A'. (iv) A register will be maintained by the contractor for record of repair duly signed by JE and Engr-in-Charge & contractor. (v) Cost of minor part i.e. Cotterr pin, PVC connector, screws shall deemed to be included in the quoted rate.

M&L for rewinding stator of exhaust fan 450mm sweep with super enameled copper winding wire of existing specification, gauge and weight including insulating material complete all as specified and directed

M&L for rewinding stator of exhaust fan 300mm sweep with super enameled copper winding wire of existing specification, gauge and weight including insulating material complete all as specified and directed

M&L for rewinding stator of exhaust fan 250/200mm sweep with super enameled copper winding wire of existing specification, gauge and weight including insulating material complete all as specified and directed

Supply only ball bearing of exhaust fan suitable for 200 to 450mm sweep as per existing ball bearing including necessary greasing complete all as specified and directed.Make:-NBC/SKF/FAG Norma

S & F in replacement of mounting legs with rubber suitable for any type of exhaust fan complete all as specified and directed

Supply only of steel blade suitable for exhuast fan upto 300mm sweep complete all as specified.

Supply only of plastic blade complete set suitable for exhuast fan upto 300mm sweep complete all as specified.

Supply only of plastic body, suitable for exhaust fan of size 300 mm sweep and making necessary connection complete all as spd and directed by Engr - in - Charge.

Supply & fix exhaust fan louvers suitable upto 300mm sweep exhuast fan complete with necessary nut, bolt iron work complete.

Supply & fix XPM Jaali at wall opening for exhaust fan of size 300mm/380mm /450mm sweep of suitable size as directed by Engr-in-Charge.

Supply only capacitor 1 µF 50 Hz suitable for Exhaust fan.MAKE- USHA/Havells/Epcos/BAJAJ

Supply only capacitor 1.8 MFD 50 Hz suitable for Exhaust fan.MAKE- USHA/Havells/Epcos/BAJAJ

M&L for painting one coat of synthetic enamel paint (black) using spray machine painting on the surface of exhaust fan of size upto 450 mm sweep (including louvers and other parts of exhaust fan) complete after preparation of surface i.e cleaning, washing of surfaces filling cavities with filler, cleaning dust and dirt all as specified and directed by Engr-in-Charge

PVC insulated copper (Flexible) conductor PVC sheathed three core .50 sq mm, fixed in repair, complete all as specified.