REPAIRS AND ATTEND DAY TO DAY COMPLAINTS IN PAPNASH AND ANAND NAGAR MARRIED ACCN AND MAINTENANCE AND REPAIR TO INTERNAL ELECTRIFICATION, FITTING AND FIXTURES IN TECH AREA AT AFS BIDAR

Amount

Note for attending complaints :- (a) Contractor shall detail his supervisor to office of Engineer-in-Charge daily by 9.00 AM who will report to concerned Engineer-in-Charge / JE to receive all complaints related to (plumbing / Carpenter / blockages / electrical, etc) of entire area under this contract. (b) Contractor shall provide service providers for all the Complaint cell as per the complaints list given alongwith all requisite tools, equipments, including safety measures for attending complaint and ensure completion report by 5.00 PM same day. (c) The complaints related to internal plumbing / blockages (WC / bath / kitchen / electrical, etc) shall be attended on the same day (within 12 hour). (d) In case of any complaint pertaining to Plumbing/Sewage/ electrical is not attended on same day, penalty @ Rs. 100/- per complaint will be deducted from contractor payments.

Supply and Fixing in repairs 15mm dia bore GI tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed

Supply and Fixing in repairs 20mm dia bore GI tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

Supply and Fixing in repairs 15mm medium grade GI Elbows, sockets, Tee (ISI Mark), complete all as specified and as directed.

Supply and Fixing in repairs 15mm medium grade GI Union sockets, (ISI Mark), complete all as specified and as directed.

Supply and Fixing in repairs 15mm medium grade GI Nipple 1/2'' X 3" (ISI Mark), complete all as specified and as directed.

Supply and Fixing in repairs GI plug cap for 15mm dia pipe complete all as specified and as directed.

Supply and Fixing in repairs GI plug cap for 20mm dia pipe complete all as specified and as directed.

Supply and Fixing in reparis CI brackets for WHB/Sink (including mortar/concrete for embedding bracket) complete all as specified and as directed

Supply and Fixing in repairs Vitreous china white colour One Piece Closet of size 515x345x355mm with integtated cistern, soft close seat cover and twin flush fittings with P' or 'S' Trap complete all as required. Make: Parryware CAT No. C8650 (P-180) or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Vitreous china white colour wall hung with dual flush cistern Closet of size 665x360x725mm with ioft close seat cover and twin flush fittings with Trap complete all as required. Make: Parryware CAT No. C022N and C716 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs vitreous china wash down water closet (Padestal Pattern) white (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with recessed bottom and connection to drain or out going pipe and flushing pipe complete all specified and as directed. Make: Parryware CAT No. C8964 (S-Trap) or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Vitreous china squatting Pan 'Orrisa' Pattern size 580 x 420 mm white with integral foot rest , P or S Trap, and lime concrete bedding complete making good disturb ground complete all as specified and as directed. Make: Parryware CAT No. C0126CS or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 450mm long etc complete all as specified and as directed. Make: Parryware CAT No. E8333 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Stainless steel sink made out of 1.00mm thick sheet or more for kitchen with plug, washers, waste pipe, connecting union overall size 495mmx420mm with bowl size 410mmx330mmx160mm including 32mm bore PTMT Waste coupling, fixing in cement mortar on to dwarf wall or fixing cantilever brackets complete all as specified and as directed.

Supply and Fixing in repairs Stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe, connecting union overall size 915mm x 460mm with bowl size 10mm x 330mm x 160mm including 32mm bore PTMT Waste coupling, fixing in cement mortar on to dwarf wall or fixing cantilever brackets complete all as specified and as directed.

Supply and Fixing in repairs Vitreous China Wash Hand Basins, size 530 X 410 mm (Flat Back or Angle Back type) including 32mm bore PTMT Waste coupling and PVC connection pipe of 15mm x 450mm long, a Pair of Angle iron Brackets duly Painted/Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. Make : Parryware CAT No C041C or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Vitreous China bowl urinal flat back, size of 380 x 405 x 590 mm white (minimum),with grating and union for discharge pipe including including 32mm bore PTMT Waste coupling and PVC connection pipe of 15mm x 450mm long complete all as specified and as directed. Make: Parryware CAT No. C0583 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs 15mm bore chromium plated cast copper alloy Bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make: Parryware CAT No. G0204A1 or Techno commercial equivalent of approved makes specified here-in-after

Supply and Fixing in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 500cm long and 125cm wide with chromium plated bracket guard and railing completeall as specified and as directed. Make: Parryware CAT No. T6009A1 or Techno commercial equivalent of approved makes specified here-in-after

Supply and Fixing in repairs Wash basin oval shape counter top of size 555x450x205mm in any coloured including 32mm bore CP Waste coupling and PVC connection pipe of 15mm x 450mm long complete all as specified and as directed. Make : Parryware CAT No C0407 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs 15mm bore Brass CP mixer(3 in 1) with wall flange ( provision for over head shower and hand shower) for mixing hot & Cold water screwed down for iron pipe complete all as directed. Make : Parryware CAT No G022FA1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs 15mm bore ABS hand shower Multiflow 100mm with 1.5M SS tube & ABS Hook complete all as specified and as directed. Make : Parryware CAT No G022FA1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs 15mm bore CP 2- Way bib cock double handle with wall flangess, glossy finish complete all as specified and as directed. Make : Parryware CAT No G021ZA1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs Brass CP Health Faucet with 1 m SS Chrome plated tube & hook complete all as specified and directed. Make : Parryware CAT No T9805A1 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing in repairs 5mm thick glass corner glass shelf of 300mm radius with CP brass railing fixed with brass Brackets complete all as specified and directed. (Make: Parryware CAT No. T6010A1 or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs brass peg set of six with screws complete all as specified and directed. (Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs SS towel Rack 600mm with screws complete all as specified and directed. (Make: Parryware CAT No. T6908A1 or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs 15mm dia angle stop cock with wall flange, fancy type of chromium plated complete all as specified and as directed. (Make: Parryware CAT No. G0253A1 or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs Toilet paper Holder with Cover of chromium plated complete all as specified and as directed. (Make: Parryware CAT No. T5914A1 or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs Stainless steel Soap dish complete all as specified and as directed. (Make: Parryware CAT No. T5903A1 or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs SS grating 100mm dia complete all as specified and as directed. (Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs SS grating with waste hole 100mm dia complete all as specified and as directed. (Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs PVC waste pipe 32mm bore of length 900mm for WHB/Sink/Urinal etc. complete all as specified and as directed. (Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs PVC waste pipe 40mm bore of length 900mm for WHB/Sink/Urinal etc. complete all as specified and as directed. (Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs brass spindles of any size, complete all as specified and as directed.

Supply and Fixing in repairs Syphon for low level flushing cistern complete all as specified and as directed. (Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs Ball cock with ball for low level flushing cistern complete all as specified and as directed. (Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs handle with lever for low level flushing cistern complete all as specified and as directed. (Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs PVC washer for Bib cock 15mm dia complete all as specified and as directed.

Supply and Fixing in repairs PVC washer for low level flushing cistern complete all as specified and as directed.

Supply and Fixing in repairs 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, fancy type of chromium plated complete all as specified and as directed. (Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs Brass CP15mm bore centre hole basin mixer Hot & Cold water Pillar taps complete all as specified and as directed. (Make: Parryware CAT No. G0214A1 or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs CP Pillar cock 15mm dia bore screwed down pressure complete all as specified and as directed. (Make: Parryware CAT No. G0202A1 or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs brass chromium plated shower rose 150mm size with or without swivel joints any size including fixing to steel pipe of 15mm bore complete all as specified and as directed. (Make: Parryware CAT No. T5135A1 or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs tubular towel rail 20mm dia D type 60cm long between flanges chromium plated all as specified and directed. (Make: Parryware CAT No. T5901A1 or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs Brass Towel ring Complete all as specified and directed. (Make: Parryware CAT No. T5902A1 or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs plastic water closet seat black/white closed pattern with recessed bottom and cover and mild steel chromium plated or aluminium device complete all as specified and as directed. (Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. (Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs CP waste coupling 32mm dia for glazed ware sinks, basins etc, complete all as specified and as directed. (Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs CP waste coupling 40mm dia for glazed ware sinks, basins etc, complete all as specified and as directed. (Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs PVC connection 450mm long of 15mm bore with pair of brass check nuts , complete all as specified and as directed. Make: Prayag or Equivalent

Supply and Fixing in repairs PVC connection 600mm long of 15mm bore with pair of brass check nuts , complete all as specified and as directed. (Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and as directed. (Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after)

Supply and Fixing in repairs Rotational moulded polyethene water storage tanks double layered 1000 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including dismantling of existing water tank,including 20mm Ball Valves, 20mm Tank nipple complete all as specified and as directed.

Supply and Fixing in repairs Rotational moulded polyethene water storage tanks double layered 500 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including dismantling of existing water tank,including 20mm Ball Valves, 20mm Tank nipple, complete all as specified and as directed.

Cleaning and removal of scale and dirt etc from exc 250 & n.exc 500 ltr of capacity tanks and from mouths of circulating pipes etc.

Cleaning and removal of scale and dirt etc from exc 500 & n.exc 1000 ltr of capacity tanks and from mouths of circulating pipes etc.

Supply and Fixing in repairs PVC OH tank covers for 500/1000 ltrs fixing with suitable arrangement complete all as specified and as directed.

Supply and fixing in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc. complete all as specified and as directed.

Supply and Fixing in repairs 110mm dia PVC (SWR) pipes single socketed Type 'B' in any length with rubber joints fixed to walls etc. complete all as specified and as directed.

Supply and Fixing in repairs 75mm dia PVC (SWR) pipes single socketed Type 'B' in any length with rubber joints fixed to walls etc complete all as specified and as directed.

Supply and Fixing in repairs PVC (SWR) bends 110mm dia any radius with access door complete all as specified and as directed.

Supply and Fixing in repairs PVC (SWR) bends 75 mm dia any radius with access door complete all as specified and as directed.

Supply and Fixing in repairs PVC (SWR) junction single,(Single T) 110mm dia equal or unequal with access door complete all as specified and as directed.

Supply and Fixing in repairs PVC (SWR) junction single,(Single T) 75mm dia equal or unequal with access door complete all as specified and as directed.

Supply and Fixing in repairs PVC (SWR) branch piece, (Single Y) 110mm dia equal or unequal with access door complete all as specified and as directed.

Supply and Fixing in repairs PVC (SWR) branch piece, (Single Y) 75mm dia equal or unequal with access door complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc.complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and Labour for Coloured Non - skid Ceramic tiles Class-iia 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material and Labour for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material & Labour for Vitrified ceramic tiles 10mm thick light shade (square/ rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including including 10 mm thick backing coat in CM 1:4 complete all as specified and as directed.

Material and Labour for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles as in skirting/dado including 10mm thick rendering in CM 1:4.etc,complete all as specified and as directed.

Material and Labour for Granite (of any type) 18-20 mm thick, work table, rubbed and polished in steps, jambs, piller, window cills, cooking platforms and like including pointing in white cement (1:2),with admixtures of pigment to match with shade of granite complete all as specified and as directed.

Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubing down with water etc.complete all as specified and as directed.

Material and Labour for Rendering 15 mm thick in CM (1:6) on fair faces of brick or concrete surfaces finished even and smooth with out using extra cement in external surfaces complete all as specified and as directed.

Material and Labour for Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of chalk whiting primer complete all as specified and as directed.

Taking down shutters of any description n exc 1 sqm each and refixing in the same opening after easing and adjusting complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each and refixing in the same opening after easing and adjusting complete all as specified and as directed.

Taking down shutters of any description exc 2 sqm each and refixing in the same opening after easing and adjusting complete all as specified and as directed.

Supply and Fixing in repairs Butt Hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised 100 mm long complete all as specified and as directed.

Supply and Fixing in repairs Aluminum anodised bow handle fabricated type extruded section of 150mm long complete all as specified and as directed.

Supply and Fixing in repairs Aluminum anodised bow handle fabricated type extruded section of 100mm long complete all as specified and as directed.

Supply and Fixing in repairs anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed.

Supply and Fixing in repairs Aluminum anodised barrel tower bolts of extruded section 100mm long complete all as specified and as directed.

Supply and Fixing in repairs Aluminum aodised sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Supply and Fixing in repairs150 mm over all length of cover plate of floor Door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor,complete all as specified and as directed.

Supply and Fixing in repairs 300mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fixed in repairs aluminium (extruded) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

Supply and Fixing in repairs Mortice lock brass 4 levers vertical type, size 100mm complete all as specified and as directed.

Supply and Fixing in repairs stainless steel 25mm dia Curtain rods with finial supports etc, with wall thickness not less than 1.2 mm, complete all as specified and directed.

Supply and Fixing in repairs 25mm dia cromium plated fancy type decorated approved design brackets with end sockets to hold the curtain rod properly complete all as specified.

Supply and Fixing in repairs 12mm thick prelaminated particle board interior grade, both side laminated with decorative choice, fixed with screws to timber frames work for shutters of ward robes ,cabinets etc complete all as specified and as directed.

Supply and Fixing in repairs Galvanised mild steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staplescomplete, complete all as specified and as directed.

Hacking out old broken glass (any thickness size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

Material and Labour for sheet glass 4mm thick ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

Material and Labour for Sheet glass 5.5mm thick ,ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each pane, complete all as specified and as directed.

Material and Labour for Welding in repairs n.exc 2.5cm in length and n.exc 6mm thickness of metal including cleaning and preparing the surface complete all as specified and as directed.

Material and Labour for Welding in repairs exc 2.5cm but n. exc 5.0cm in length and n.exc 6mm thickness of metal including cleaning and preparing the surface complete all as specified and as directed.

Supply and Fixing for in reapirs stainless steel Auto closing hinges for fixing cabinet doors in kitchen cabinet system with self closing mechanism which allows the cabinet door to close smoothly complete all as specified and as directed.

Supply and Fixing in repairs 40mm dia cup boards knobs, mild steel bright finished fixed with nut, screws and washers or brass polished complete all as specified and as directed.

Supply and Fixing in repairs Oil putty glazing with spring Clips in metal surrounds n exc 0.5 Sqm in each panel etc complete all as specified and as directed.

Supply and Fixing in repairs Oil putty glazing with spring Clips in metal surrounds n exc 0.5 Sqm in each panel etc complete all as specified and as directed.

Taking down existing unserviceable point wiring of any description/type/ size of light / fan / tube / power / two way / bell etc on TW batten / conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators / light fittings etc and seperating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

Taking down existing unserviceable light fittings sketch type / box type / building security light fitings complete by un screwing from boards / walls / buildings and making good disturbed surface to match with existing finish complete all as directed.

Taking down old unserviceable / burnt submain wiring of aluminium conductor cable of any size, complete all as specified and as directed.

Material and labour for, Concealed point wiring complete as specified with 1100V grade with 1,5 Sqmm single core PVC insulated cable, copper conductor multistranded passing through and including PVC concealed 20mm dia (light duty) conduit and conduit accessories with concealed MS / PVC box and logic modular white plate of suitable size as required at site with PVC insulated unsheathed stranded copper conductor of size 1.5 Sqmm as earth wire connected to common earth dolly as specified for one light point controlled by one switch all as specified and as directed Note : Rate shall deemed to include cost of cutting wall / floor / ceiling and making chasses and MS box in concealed for cutting and sinking for boxes and making good to walls matching to adjacent surfaces.

All as per Serial item No 109 here-in-above, but in same board with other switches for 5 Amp switch socket with earth wire 1.5 sq mm PVC insulated multistranded copper conductor cable all as directed by Engineer-in-Charge.

All as per Serial item No 109 here-in-above, but for 5 Amp switch socket on independent board with earth wire 1.5 sq mm PVC insulated multistranded copper conductor cable all as directed by Engineer-in-Charge.

All as per Serial item No 109 here-in-above, but size of cable 2.5 sq mm for 15 Amp switch socket with earth wire 1.5 sq mm PVC insulated multistranded copper conductor cable all as directed by Engineer-in-Charge.

Material and labour for point wiring complete as specified with 1100 V grade with 1.5 Sqmm single core PVC insulated unsheathed cable, copper conductor multistranded passing through including heavy duty PVC casing capping with all accessories surface type on wall/roof/floor/with concealed MS box / Surface type PVC box as required at site with laminated top cover duly earthed with 1.5 sq mm multistranded PVC insulated copper conductor cable for one light point /bell point /fan point controlled by one switch

All as per Serial item No 113 here-in-above, but in same board with other switches for 5 Amp switch socket with earth wire 1.5 sq mm PVC insulated multistranded copper conductor cable all as directed by Engineer-in-Charge.

All as per Serial item No 113 here-in-above, but for 5 Amp switch socket on independent board with earth wire 1.5 sq mm PVC insulated multistranded copper conductor cable all as directed by Engineer-in-Charge.

All as per Serial item No 113 here-in-above, but size of cable 2.5 sq mm for 15 Amp switch socket with earth wire 1.5 sq mm PVC insulated multistranded copper conductor cable all as directed by Engineer-in-Charge.

Supply and fix in replacement switch piano flush, single pole, one way, 5/6 Amp, all as directed by Engineer in Charge.

Supply and fix in replacement switch piano flush, single pole, one way, 15 Amp, all as directed by Engineer in Charge.

Supply and fix in replacement switch bell push piano, flush, single pole, 5/6 Amp, all as directed by Engineer in Charge.

Supply and fix in replacement socket outlet 3 Pin 5 Amp, flush type, all as directed by Engineer in Charge.

Supply and fix in replacement socket outlet multipurpose, 3 Pin 15/16 and 3 pin 5/6Amp, 240 Volt, controlled by one switch all as directed by Engineer in Charge.

Supply and fix in replacement switch modular type, 1 Module, single pole one way 6 Amp with all accessories all as directed by Engineer-in-Charge,

Supply and fix in replacement switch modular type, 2 M, single pole one way 16 Amp with all accessories all as directed by Engineer-in-Charge.

Supply and fix in replacement socket outlet 3 Pin 6 Amp, modular type, 1 M, all accessories all as directed by Engineer-in-Charge.

Supply and fix in replacement socket outlet multipurpose 3 Pin 16 modular type with all accessories all as directed by Engineer-in-Charge.

Supply and fix in repair modular switch 2 way 6 Amps 1 module 230 Volts AC complete all as specified and directed.

Supply and fix in repair modular bell push flush type 6 Amps 1 module 230 Volts AC complete all as specified and directed.

Supply and fix in repair Modular white cover plate with frame & plastic boxes 8 module 230 Volts AC complete all as specified and directed.

Supply and fix in repair Modular white cover plate with frame & plastic boxes 6 module 230 Volts AC complete all as specified and directed.

Supply and fix in repair Modular white cover plate with frame & plastic boxes 4 module 230 Volts AC complete all as specified and directed.

Supply and fix in replacement ceiling rose 3 terminal 5 Amps 230 volts PVC / Polycarbonate, insulated body complete all as specified and as directed.

Supply and fix in replacement lamp holder, angular type, PVC/ polycarbonate with back plate of capacity 5 Amps 230 volts suitable for general lighting system complete all as specified and as directed.

Supply and fix in replacement bell AC 230 Volt Ding Dong type.240 Volt AC supply , All as directed Engineer in Charge.

Supply and fix in repairs fan regulator , AC, 230V, single pole electronic, step type, complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Two module, Fan regulator any watt, step type, AC, 230V, electronic, complete all as specified and directed by Engineer-in-Charge.

Disconnection and removing the unserviceable MCB plug and socket unit and S&F Single pole and neutral enclosure with a two pin earth plug and socket complete and controlled by one single pole MCB 20 Amps 240 Volts, complete all as specified and as directed.

Supply and fix in repairs, MCB DB SPN 4 way (Horizontal), double door with Sheet metal enclosure, flush mounted, prewired, 240 V, AC, 50 Hz, Factory made, powder coated, IP-42 protection conforming to IS-13032 universal mounting with 200 Amps rated copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, etc complete all as specified and as directed. Notes : i) All unused modules shall be provided with blanking plate for which the cost is deemed to be included in the cost of MCB DBs. ii) MCB/ Isolators will be measured and paid separately as supply and fix under respective items.

All as per Serial Item No 137 here-in-above, but MCB SPN 8 way.

All as per Serial Item No 137 here-in-above, but MCB SPN 12 way.

All as per Serial Item No 137 here-in-above, but MCB TPN 4 way.

All as per Serial Item No 137 here-in-above, but MCB TPN 6 way.

All as per Serial Item No 137 here-in-above, but MCB TPN 8 way.

Supply and fix in repairs, MCB SP 5 - 32 Amps, C-curve, 10 ka breaking capacity, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs, MCB SPN 6 - 32 Amps, C-curve, 10 ka breaking capacity, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs, MCB SPN 40 to 63 Amps, C-curve, 10 ka breaking capacity, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs, MCB TPN 16 to 32 Amps, C-curve, 10 ka breaking capacity, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs, MCB TPN 40 to 100 Amps, C-curve, 10 ka breaking capacity, complete all as specified and as directed by Engineer-in-Charge.

S & F sheet metal enclosure, MCCB VTPN, 8 way Double door Ready to use DBs - Provided with insulated vertical phase bus-bars |neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cable ties | blanking plates and circuit identification labels With provision for 4 Pole MCCB upto 200 A as incomer and SP/SPN/TPN MCB s as outgoing complete all as specified and directed. Model:- DBVTM004DD, Make-L&T or techno commercial equivalent in approved makes specified here-in-after.

Supply and fixing in replacement MCCB of 125 Amp 4 pole 25 KA in existing panel board connecting with proper size link set, incoming ,out going cable electrically connected and making necessary modification in existing panel as required at site complete all as specified and directed by Engineer-in-Charge .

All as per Serial item No 149, here-in-above, but of rating 100 Amp 4 pole 25 KA

All as per Serial item No 149, here-in-above, but of rating of 63 Amp 4 pole 16 KA

Supply and Fix in repairs, high efficient LED light fitting luminaire 20 - 22 W with extruded Aluminium batten (4 feet), system efficacy 100 lm/W, IP- 20 protection, surge protection 2 kV, driver efficiency >85%, power factor > 0.95, THD ≤20%, ,colour rendering index CRI >80, temperature range 0 to 45 degree centigrade, CCT: 6500K, Voltage range 140-270V AC suitable for Surface, Wall and Conduit mounting complete all as specified and as directed.

Supply and Fix in repairs, high efficient LED light fitting luminaire 10-12W with extruded Aluminium batten(2 ft) , system efficacy 100lm/W, IP20 protection, , surge protection 2 kV, driver efficiency >85%, power factor > 0.95, THD ≤20%,colour rendering index CRI >80, temperature range 0 to 45 degree centigrade, CCT: 6500K, Voltage range 140-270V AC suitable for Surface, Wall and Conduit mounting complete all as specified and as directed.

S & Fix in replacement LED bulb 9 W complete all as specified and as directed.

S & Fix in replacement LED bulb 30 W complete all as specified and as directed.

Supply and fix in repairs, 70 W high efficient LED Bldg security light fixture, single piece Aluminum Pressure Die Cast Housing Luminaire system efficacy >120lm/W, high purity polycarbonate/glass diffuser, with silicon gaskets for IP66 protection, in built electronic driver with phase to phase protection at 440V with high voltage cut off and should have auto recovery features, Metal fully potted and encapsulated driver to protect against moisture with of constant current low/over voltage protection (Under Voltage protection should Survive Input Voltage Stress of 100V ) duly wired up to terminal block, surge protection 4 kV within the driver compartment, IEC 60598 to be followed, driver efficiency >88%, power factor > 0.95, THD ≤10%,driver make must be as luminares LED used to be SMD LED,secondary optics is must for better light distribution, LED must be mounted on quality MCPCB and to avoid mutiple soldering and frequent failure of LED chip, LED complete all as specified and as directed.

Supply and fix in repairs, 45W high efficient LED Bldg security light fixture, single piece Aluminum Pressure Die Cast Housing Luminaire system efficacy >120lm/W, hgh purity polycarbonate/glass diffuser, with silicon gaskets for IP66 protection,in built electronic driver with phase to phase protection at 440V with high voltage cut off and should have auto recovery features, Metal fully potted and encapsulated driver to protect against moisture with of constant current low/over voltage protection (Under Voltage protection should Survive Input Voltage Stress of 100V duly wired up to terminal block, surge protection 4 kV within the driver compartment, IEC 60598 to be followed, driver efficiency >88%, power factor > 0.95, THD ≤10%,driver make must be as luminares LED used to be SMD LED,secondary optics is must for better light distribution, standard, LED must be mounted on quality MCPCB & avoid mutiple soldering and frequent failure of LED chip, LED complete all as specified and as directed.

S & F in replacement 34 W IP LED panel white/warm as required made from CRC housing with full window acrylic diffuser indoor ( recessed/ surface mounted ) 2 ftX2 ft lightning fixture flat light dissipater. The CCT should be between 3000 k to 6500 K including taking down light existing unsv light fitting complete all as specified and as directed.

S & F 34 W IP LED panel white / warm light as required made from CRC housing with full window acrylic diffuser indoor ( recessed/ Pendent) 1 ftX4 ft lightning fixture flat light dissipater. The CCT should be between 3000 k to 6500 K including taking down light existing unsv light fitting complete all as specified and as directed.

S & F in repairs, Recess mounted LED spot light fitting 30 W, 240 V, with high efficiency of 140 lm/W complete with electronic driver with all accessoaires inernally prewired and necessary mounting arrangements, including provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including suitable LED Driver complete all as directed by Engineer-in-Charge. Make : Bajaj Cat Part No BRDCSL 30W NW/WH/WW, or equivalent in approved makes specified here-in-after.

S & F in repairs, Recess mounted LED spot light fitting 40 W, 240 V, with high efficiency of 140 lm/W complete with electronic driver with all accessoaires inernally prewired and necessary mounting arrangements, including provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including suitable LED Driver complete all as directed by Engineer-in-Charge. Make : Bajaj Cat Part No BXDR 40W WW, or equivalent in approved makes specified here-in-after.

S & F in repairs, IP 65 Rated LED Bollard light 8W/10W , provision of new 3 core multistranded copper conductor of size 23/0.193 from control DB to fitting including suitable LED Driver complete all as directed by Engineer-in-Charge. Model : Havells Cat Part No BAMBOOBLS8WLED830PSYMTOPC or techno commercial equivalent in Crompton and Bajaj.

S & F in repairs, IP 65 Rated Decorative landscape 25 W, LED Post Top, pressure die cast with PC diffusers, high efficiency light ideal for herirage sight, provision of new 3 core multistranded copper conductor of size 23/0.193 from control DB to fitting including suitable LED Driver complete all as directed by Engineer-in-Charge. Model :- CORALPT25W OF Havells or technocommercial equivalent makes specified here-in-after.

Disconnection and removing burnt / unserviceable wiring and providing Material and labour for Sub main wiring / power wiring complete with two runs of 4.0 Sqmm, PVC insulated, unsheathed FRLS cable, 1100 Volts grade, multistranded with copper conductor, drawn through and including suitable size of rigid non metallic PVC conduit pipe and accessories on surface wall/floors/ with one run of PVC insulated, 4.0 Sqmm FRLS copper conductor for earth continuity complete all as specified and as directed. NOTE :- Two runs of main copper conductor, one run of copper conductor for earth continuity and one run of conduit shall be measured as one unit length.

All as per Serial item No 164 here-in-above, but with 2 runs of 6.0 Sqmm for phase and neutral and 1 run of 6.0 Sqmm for earth wire complete all as specified and as directed. NOTE :- Two runs of main copper conductor, one run of copper conductor for earth continuity and one run of conduit shall be measured as one unit length.

All as per Serial item No 164 here-in-above, but with 2 runs of 10 Sqmm for phase and neutral and 1 run of 10.0 sqmm for earth wire complete all as specified and as directed. NOTE :- Two runs of main copper conductor, one run of copper conductor for earth continuity and one run of conduit shall be measured as one unit length.

Supply and fixing in replacement switch socket combination flush type universal 2 in 1, 3 pin 5 Amps 230 volts ISI Marked complete all as specified and as directed.

Supply and fixing in replacement switch socket combination flush type universal 2 in 1, 3 pin 15 Amps 230 volts ISI Marked complete all as specified and as directed.

Supply and fixing in replacement modular switch socket combination flush type, 3 pin 5 Amps 230 volts ISI Marked complete all as specified and as directed.

Supply and fixing in replacement modular switch socket combination 3 module, 6 pin 16 Amps 230 volts ISI Marked complete all as specified and as directed.

Supply and fixing in replacement modular white cover plate with frame, 2 module complete all as specified and as directed.

Supply and fixing in replacement modular white cover plate with frame, 3 module complete all as specified and as directed.

Supply and fixing in replacement modular white cover plate with frame, 4 module complete all as specified and as directed.

Supply and fixing in replacement modular white cover plate with frame, 6 module complete all as specified and as directed.

Supply and fixing in replacement modular white cover plate with frame, 8 module complete all as specified and as directed.

Dismantling the earth chamber, Excavating and removing the unserviceable earthing materials along with unserviceable earth electrodes from the existing u/s earth pits and M & L for providing earthing with GI earth plate electrode 600 mm x 600 mm x 6.3 mm thick burried directly in ground vertically to depth of not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to GI earth strip of 25x4mm by means of bolts, nuts, washers of GI and provision of earth lead, GI protection pipe with 15mm light grade galvanized including necessary earth work in any type of soil, PCC 1:3:6 type CI (using 20 mm graded stone aggregate) earth chamber and PCC 1:2:4 type B- 1 , RCC cover slab 50 mm thick with 6 mm dia MS bars, 75 mm c/c, complete all as shown in SSR Pt - 1 electrical plate No 3 complete all as specified and as directed. NOTE :- Unit rate Qoted is deemed to include the cost or excavation and earth work, RFR, Removal in any type of soil, PCC Chamber, funnel , RCC Cover Slab etc complete.

Dismantling unserviceable corroded building security light bracket , Supply and fix brackets made out of 40 mm dia GI tubing medium grade upto 1.5 m long including bending welding drilling holes as required and fixing with flat iron clamps 32 x 6 mm thick 2 nos with suitable nut bolts and washers to steel tubular / concrete poles complete all as specified and as directed.

Supply and fix in repair Modular metal flush box with 3 module 230 Volts AC complete all as specified and directed.

Supply and fix in repair Modular metal flush box with 4 module 230 Volts AC complete all as specified and directed.

Supply and fix in repair Modular metal flush box with 6 module 230 Volts AC complete all as specified and directed.

S & F in repair Modular metal flush box 8 module 230 Volts AC complete all as specified and directed.

S & Fix in replacement industrial metal plug with socket with three phase 3P+N+E, 4 module 5 pin 63 amps complete all as specified and as directed.

S & Fix in replacement industrial metal plug with socket with three phase 3P+N+E, 4 module 5 pin 32 amps complete all as specified and as directed.

RAMESH CONSTRUCTION COMPANY (BID ID -3427627)

GOWRIPRIYA ENTERPRISES (BID ID -3438863)