SPECIAL REPAIR TO LVG BAY (BLDG NO P -410) AT HARNI AREA, AT EME SCHOOL VADODARA

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as directed.

M & L for preparing old steel surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

Note to Item No 1 to 5 above:- ( i) Items are to be operated above 6.0 m height from GL, hence Safety precautions to be followed as per respective IS Codes. ii) Cost against each item quoted by bidder is deemed to have taken into consideration above aspects and necessary tools and plants required, while quoting.)

S & F in repairs mild steel, plain, black sheet 1.25mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

S & F 1.25mm thick, 150mm dia Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges

S&F in repairf PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 150 mm dia.

Demolition of existing PCC /lean concrete in ground floor and pavings n exc 15 cm thickness including floor tiles and removing rubbish off the premises.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) 75mm thick as in sub base to floor

M&L cement concrete 1:2:4 type B-0 (using 12.5 mm graded aggregate) 25mm thick as in floor, finishing even and smooth with out using extra cement.

S & F 28 mm wide Glass dividing strips, 3 mm thick inserted in position, conform to design

S & F hand rails, half round or other steel section straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M & L for non skid coloured ceramic tile 8 to 9 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile color including screed bed or bedding layer of mortar 15mm thick for in CM 1:6 (Tile pattern and decoration may be as suggested by Engineer-in-charge)

M&L for non skid coloured ceramic tile 8 to 9 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , as in skirting etc set over and including high performence adhisive manufactured by somani ezifix tile adhisive or equivalent mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout manufactured by somani ezy grout or equivalnet of pigment matching to tile color including rendering of mortar 10 mm thick for laying floor finishes with CM 1:4 (Tile pattern and decoration may be as suggested by Engineer-in-charge)

M & L for Glazed ceramic coloured walls tiles in vertical surfaces 300x450/350x450/250x300 6mm to 7 mm thick set set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm rendering for screed bed on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles (Tile pattern and decoration may be as suggested by Engineer-in-charge).

M & L for machine cut kota stone slab flooring 20 - 25mm thick set over and including high performence adhesive manufactured by somani ezifix tile adhesive or equivalent mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout manufactured by somani ezy grout or equivalnet of pigment matching to tile color including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6

M & L for machine cut kota stone slab 20 - 25mm thick in skirting, riser etc set over and including high performence adhisive manufactured by somani ezifix tile adhisive or equivalent mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout manufactured by somani ezy grout or equivalnet of pigment matching to tile color including 10mm rendering for screed bed on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5sqm each

Taking down chowkats or frame with shutter (without taking off shutter from the frame) Exc 1.5 Sq m but n.exc 4.00 Sq m each

S&F aluminium powder coated of any colour (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F of Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete all as per the directions of Engineer-in-charge.

S&F 4.00mm thick sheet glass, ordinary quality and glazing with rubber beading or with glazing clips, all as specified and directed.

S&F 4.00 mm thick plain, white Acrylic transparent sheet fixed with coach screw and washer in roof, cladding etc. to wood/steel member all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

M&L for 100mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with aluminium door frame with screw complete all as specified and directed.

S & F 125 mm size extruded aluminium alloy handles, febricated type anodised

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M & L For Green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including screed bed or backing coat 10 mm thick in CM 1:4

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described.

Hacking out old broken glass exc 1.50 sqm (any thickness, size, quality or description)from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc,

M & L for Brickwork with sub class ‘B’old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6

Demolition of cement concrete (reinforced) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work all as directed.

Taking down cement plaster on brick/concrete surface including raking out joints hacking for key scrubbing down with water etc.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6, finished even and smooth (without using extra cement)

M&L for Rendering in two layer on fair faces of brick work or concrete surfaces of wall, 5 mm thick in CM 1:4 mixed with WPC as per manufacturers instructions finished even and smooth without using extra cement over 10 mm thick rendering in cement mortar 1:6 (WPC will be measured and paid separately).

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces of ceiling in cement mortar 1:4 finished even and smooth (without using extra cement)

Supply only Integral water proofing compound all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying three coats of white wash matching to existing wall surface.

M & L for preparation of newly plastered surfaces of walls/ceilings of roof projection and chajjas etc. and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old/new surfaces.

M & L for complete removal of old existing treatment completely by scrapping and or rubbing of wall and applying three coats of white wash

M & L for complete removal of old existing external treatment completely by scrapping and or rubbing of walls/ceilings of roof projection and chajjas etc. and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old/new surfaces.

M & L for preparing new plastered surfaces of ceiling and applying three coats of white wash.

M & L for preparing old plastered surfaces of ceiling and applying a coat of white wash on ceiling to match the existing surfaces.

S & F solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing and matching with door shutter shade. The door frame shall be tied to the wall using 75/100mm long MS screw as directed .

S & F 30mm thick factory made both sides prelam panel PVC door shutter consisting of frame made out of MS tube of 19 gauges thickness and size 19mm x 19mm for stiles, top and bottom rails, MS frame shall have a coat of steel primer of approved make and manufacture. MS frame shall be covered with 5mm thick heat moulded prelam PVC C channel size 30mm thickness, 70mm width, out of which 50mm should be flat and 20mm shall be tappered in 45 degree < on either sides forming stiles and 5mm, 95mm wide prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide. prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tappered on both sides to form lock rail. Top rail, bottom rail and lock rail shall be provided either sides of the panel 10mm (5mm x2) thick 20mm wide cross PVC sheet shall be provided as gap insert for top rail, and bottom rail paneling of 5mm thick both side prelam PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with 7mm (5mm+2mm) thick 15mm wide. PVC sheet beading on inner side and jointed together with solvant cement adhesive, an additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of C channel using PVC solvant adhesive etc. complete all as specified and directed.

S & F 150mm aluminium anodised barrel tower bolts of extruded section and fixed.

S & F in repair tubular curtain rails 25mm dia stainless steel 202 grade drapery type complete all as specified directed

S & F in repairs stainless steel socket fancy type with bracket for 25mm dia stainless steel tubular curtain rod (design of socket shall be approved by GE/AGE at the time of execution) as directed

Complete removal of existing water proofing treatment of any type incl taking down plaster, padding of any description , cleaning, flushing out junctions of parapet wall washing down with water etc to prepare surface for new WPT including removing off rubbish at out side MD land. and all as specified and directed

M&L for 50 mm avg thick PCC padding in cement concrete type B0 (1:2:4) using 12.5 mm graded stone aggr mixed with WPC as per manufacturer's instructions over roof for laying of WPT all as specified and directed. (WPC will be measured and paid separately).

M&L for 10mm thick rendering on roof in CM 1:3 mixed with WPC as per manufacturer's instructions of cement for finished even and smooth without using extra cement over PCC surface for laying APP membrane on roof (WPC will be measured and paid separately).

M&L for water Proofing treatment to roof slabs by applying one coat of bituminious/polymerized primer confirming to IS-3384 @ 0.30 Ltrs/Sqm, and laying actetic polypropylene (APP) modified membrane pre fabricated , reinforced with non woven polyester, of minium 3.50 Kg/Sqm 3 mm thick (minium) with minium 75 mm side overlaps and minium 100 mm end overlaps and applying one coat of aluminium paint @ 0.11 Kg/Sqm over APP membrane complete all as specified and directed by Engr-In-Charge

M & L for brushing with neat cement slurry @ 3Kg/Sqm

Cutting grooves in brick parapet wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 for sealing APP membrane in brick parapet wall complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, all as directed by Engr-in-Charge.

S & F 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

S & F 20 mm dia CPVC pipes (Internal dia 15 mm bore) SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Taking up or down 20mm bore steel tubing and connections, all as directed by Engr-in-Charge.

S & F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

S & F 25 mm dia CPVC pipes (Internal dia 20 mm bore) SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge.

S & F 25mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

S & F 32 mm dia CPVC pipes (Internal dia 25 mm bore) SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Dismantling cast iron pipes, jointed in cement mortar for 100 mm bore

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall or laid in floors all as specified and as directed.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches all as specified and as directed.

Dismantling cast iron pipes, jointed in cement mortar for 75 mm bore

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall/trenches or in floors all as specified and as directed.

S & F in repairs 110mm bore PVC (SWR) bends any radius all as specified and as directed.

S & F in repairs 110mm bore PVC (SWR) bends any radius with oval access door all as specified and as directed.

S & F in repairs 75mm bore PVC (SWR) bends any radius all as specified and as directed.

S & F in repairs 75mm bore PVC (SWR) bends any radius with oval access doors all as specified and as directed.

S & F in repair 75mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent all as specified and as directed.

S & F in repairs 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal or with parallel branches with access door all as specified and as directed

S & F in repairs 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal or with parallel branches with access door all as specified and as directed

S & F in repairs stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incliding bolts and nuts and securing ends of stays to walls and roofs for 110mm bore pipe all as specified and as directed

S & F repairs stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incliding bolts and nuts and securing ends of stays to walls and roofs for 75mm bore pipe all as specified and as directed

S & F 110mm PVC (SWR) vent cowl all as specified and as directed

S & F 75mm PVC (SWR) vent cowl all as specified and as directed

S & F in repairs 15mm bore chromium plated fancy type bib tap long body, screwed down, high pressure for iron pipe or for brass ferrule

S & F in repairs stop valves/Angle valve15mm bore fancy type chromium plated screwed both ends for iron pipe or for unions and fixed

S & F in repair concealed stop cock fancy type with sheet flange cast copper alloy, scrwed down high precure with round operating knob for 15 mm bore pipe bore and fixed all as specified and directed.

S & F in repairs 25mm dia bore gun-metal,globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed

S & F in repairs 125mm dia chromium plated shower rose with swivel joints including fixing to GI union complete

Dismantling of water storage tank of 500 ltrs capacity.

S & F 500 Ltrs Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S & F in repairs 20mm dia brass chrome plated tubular towel rail complete.

S & F in repairs Ball brass valves, for 25 mm bore of pipe high pressure, with polythene float and fly- nut complate, screwed for iron pipe or brass ferrule and fixed

S &F repairs vitrous china wash down water closet pan (pedestal pettern) white including white plastic water closet seat and back with flat bottom and cover mild steel chromium plated or aluminium anodised hinging device (excluding flaushing cistern and flush pipe) but encluding fixing bolt and necessary connection with existing pipes completed all sepecified and directed.

S&F in repairs PVC flushing cistren low level, 10 ltr capacity with syphonic action type ball valve. Incl inlet ball valve, PVC band 32mm complete all as specified.

S & F 110mm PVC (SWR) WC connector with lip ring all as specified and as directed.

S & F 110mm PVC (SWR) WC connector bent type to fit WC outlet all as specified and as directed.

S & F 110mm PVC (SWR) junction single, (Single T, 'Y' type) equal or unequal all as specified and as directed.

S & F 75mm PVC (SWR) junction single, (Single, 'Y' type T) equal or unequal all as specified and as directed.

S&F in repair vitreous china Wash hand basin, white , flat back size 550x400 mm except taps, CP waste coupling but incl brackets all as specified.

Supply and fixing in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe.

S & F in repair 32 mm dia stainless steel waste coupling for wash hand basin all as specified and directed. Make : Prayag or equivalant.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm

M&L for sunken treatment of WC/Bath with polymeric membrance (APP based) with non woven polyster mat as reinforcement including water tightness test with filling of water for continuous 48 hours with following :-

Demolition of existing PCC /lean concrete including floor tiles and removing rubbish off the premises.

M&L for 15 mm thick plaster in sunken portion with CM 1:3 mixed with water proofing compound as per manufacturers instructions finished even and smooth without using extra cement all as directed. Note . (WPC will be measured and paid separately).

M&L for providing & laying APP based polymeric membrance of weight of 3 kg/sqm with non woven polyster fibre as reinforcement over a coat of bituminious/polymerized primer confirming to IS-3384 @ 0.30 Ltrs/Sqm by torch application with side over laps & longitudinal joints over laps etc as per manufacturer instructions complete all as specified and as directed..

M&L for sunken portion filled with lean concrete 1:5:10 using brick/lime aggregate and finish the surfaces rough to receive sub base complete all as specified and as directed.

M & L for 25 mm thick cement concrete in flooring type Bo, 1:2:4 (12.5mm graded aggregate) with water proofing compound as per Manufacturers instructions for laying floor tiles. Note (WPC will be measured and paid separately).

Taking down existing UNSV copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.and making good disturbed surfaces of walls, floors, etc

Dismantling and taking out submain wiring 2/3/4/6 wire of any size, segregating for material for reuse, making good disturbed surface of walls/floors to match with existing surface and taking out from site all as directed by Engineer-in-Charge.

M&L for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLS cable 1100 volts grade, conforming IS 694 & color code in conduit system of wiring, drawn in and including medium grade PVC conduit not less than 20 mm dia concealed, including cutting chases, finishing of slote by means of cement mortor making good to the existing surface of the wall & touch up with the existing colour of wall with three coats and making good disturbed surface complete, sunk in pressed steel terminal boxes of required size not less than 1.6mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified for :-

One light point controlled by one switch 6 Amp one way

One fan point controlled by one switch 6 Amp one way

One exhaust fan point controlled by one switch 6 Amp one way

One bell point controlled by one switch 6 Amp one way

One 3 pin switch socket combination 6 amp on the independent board.

One 3 pin switch socket combination on same board with other switches.

One light point controlled by two 2 way switches

All as described as peritem No 107 above but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 2.5 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board.

S & F MCB DB SPN 12 way factory made IP 42 protection class metal double door with 200 Amp rated bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc completed.Make: Legrand/Schneider/L&T

S & F MCB DB VTPN 4 way factory made IP 42 protection class metal double door with 200 Amp rated bus bar 240/430V complete all as directed by Engr-incharge. Make: Legrand/Schneider/L&T equivalent

S & F MCBs 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 Sqmm terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB. Make: Legrand/Schneider/L&T as under:-

MCB SPN 32 Amps.

MCB SP 6 to 40 Amps

S&F DX3 RCBOs double pole 240Volt, AC type 30mA ISI marked as per IS-12640-2 integrated label holder, ergonomic design with colour cooled ON/OFF indication on dolly with front face indication for earth leakage fault having IP 20 protected terminals of size 35 sqmm of 25 Amps capacity, CAT Part No 411326 of make : Legrand or equivalent in Schneider/L&T

S&F MCCB TPN 4 pole 160 Amps 240/415 Volts 25 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB Make: Legrand/Schneider/L&T

S&F switch piano flush type single pole, one way 6amp, 240V, Make: Anchor/SSK/CONA.

S&F switch piano flush type single pole, two way 16 amp, 240V, Make: Anchor/SSK/CONA.

S&F switch socket combination 2 in 1, 5 pin 6 amp, 240 V, Make: Anchor/SSK/CONA. or in equivalent

S&F switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type 240 V, Make: Anchor/SSK/CONA. or in equivalent.

S&F S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd

S&F ceiling rose 65x17mm three terminals 230/250V, ISI marked .

S& F lamp holder,PVC/Polycarbonate type and back plate suitable for batten fitting along with 09 watt LED Lamp of make : Philips/Bajaj/Wipro

S&F flush type bell push 5 amp, 240V duly marked for bell complete.

S&F Electronic ding dong bell AC 230V single pole .make Anchor/ Bajaj

S&F sheet metal enclosures with socket plug top, and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB upto 20 Amps, 240 Volt capacity fixed flush to wall surface including making good to damaged surface of wall to match with existing specification and tested on completion complete including taking out old all as directed.

M&L for Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor. NOTE : Two runs of single core 4 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

M&L for Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 6.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 6.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor. NOTE : Two runs of single core 6 sqmm and one run of 6.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

Supply and fixing LED light fitting 1 x 22 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable sizecomplete

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

S & F wall security light LED type 35 W complete all as directed and specified by Engr-In-Charge. Make- Havells, Phillips/Wipro/CG.

M&L for replacement of 25 mm bore light grade GI pipe fixed as bracket, on poles any type, not less than 1.0 m long and bent to shape as required complete with sutiable clamp made out of 25x4mm Flat Iron duly fixed 12mm dia nuts, bolts, washers etc.suitable for steel tubular / PCC pole complete all as specified and directed by Engineer-in-Charge.

Supply, fixing, testing & commissioning of Exhaust fan 450 mm sweep, heavy duty aluminum rust proof body & blades, with louvers for protection from birds, 230 Volt AC supply, rated power input not more that 45watt, with louvers fixed outside bldg for auto opening and closing connecting up including provison of cable from ceiling rose to fan. Make : CG/Bajaj/Havells or equivalent. Similar to Crompton Greaves model No Trans Air 9" Note:- Old unserviceable exhaust fan deposite in AGE(E&M) store yard.

Earthing complete with galvanized steel plate electrode 60 cm x 60 cm x 6 mm surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25 meter below ground level with top edge of the earth plate at a depth of not less than 1.50 meter below ground level connected to galvanized iron or steel earth wire, 4 mm dia (No. 8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron, earth wire protected by galvanized steel pipe 15 mm dia (Light grade) & connected to main switch or main control board all as shown in electrical plate No. 3 of SSR-2009 Part I & including necessary excavation and earth work in any type of soil strata The rate also include charcoal and salt in alternate layers 20 mm dia pipe (Light grade) for watering, protection pipe, funnel, wire mesh, PCC chamber in cement concrete (1:3:6) type C-I, 40 mm thick RCC (1:2:4) type B-1 cover and CI frame etc. NOTES: - (i) The unit rate includes earthing wire and protection pipe up to 7.5 metre.(ii) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe bends elbow shall be deemed included in the rate.

Harsh Infrastructure

City Light

Chanda Construction Co.

Badri Electricals

Shree Vaishno Enterprises