Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
29 Apr 2026, 11:00 amClosed
Single Packet
Normal Tender
No
Not Applicable
Total Value Wise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
81
2 conditions · 2 needing a document upload
i) Only the manufacturers should quote and if they intend to quote through authorized agent, the authorization by the firm should be tender specific. (ii) In a tender authorized agent on behalf of the Principal/OEM or Principal/OEM itself can bid but both cannot bid simultaneously for the same item/product in the same tender. (iii) If an agent submits a bid on behalf of the Principal/OEM, the same agent shall not submit a bid on behalf of another Principal/OEM in the same tender for the same item/product. (iv) The authorised agent's/distributor's price will not exceed the price at which the manufacturer would have quoted. (v) Violation of any of the above conditions will liable the offer to be summarily rejected.
Firms to attach documentary evidence of their successful performance for tendered/similar item in Indian Railways within three years from the date of opening of this tender. This evidence must include: - Copies of CRN/CRAC in case of Gem/ IC. Failure to provide this documentary evidence of successful supply will result in summary rejection of the offer. Please note that submission of only a purchase order copy will not be considered as proof of past performance.
17 conditions
Please check as above
LIQUIDATED DAMAGE (LD) ON DELAYED SUPPLY: For delayed supplies, Recovery of Liquidated Damage (LD) shall be levied @1/2% (half percent) of the price of the store per week or part of the week during which delivery is accepted and the upper limit for recovery of LD in supply contracts is 10%(ten percent) of the value of contract irrespective of delays, unless otherwise provided, specifically in the contract.
Firm to note that single use plastic should not be used in packing, if material to be supplied otherwise it will be rejected. Collection of non-bio-degradables old waste after successful delivery of the product/material from consignee place will be arranged by the supplier.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
3 locations across Gujarat, Maharashtra · 1,341 Numbers total
Spanner
81255928B
81255928B
Open - Indigenous
Goods
Valsad, Gujarat
₹0
Exempted
29 Apr 2026
31 Mar 2026
16 items · 1,341 Numbers total
Supply of Round Ring Type Spanner suitable for tightening and loosening of 41 mm fish bolts u sed in railway track fittings, manufactured from high-strength forged steel such as Chrome Vanadium steel o r equivalent carbon steel (EN-8/C45), duly heat treated for strength and durability and suitable for heavy-dut y field use in P.Way maintenance. The spanner shall be of 41 mm size with an overall length of approximatel y 840 mm to provide higher leverage for tightening fish plates and other track fastenings, with an approxima te weight of 3.5 kg. The spanner shall have a blackened/phosphated/painted or equivalent anti-corrosive fini sh and shall be capable of withstanding repeated high-torque applications under field conditions. [ Warrant y Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| PERMANENT WAY INSPECTOR P W DEPOT VALSAD, WR | Gujarat | 115.00 Numbers |
| PERMANENT WAY INSPECTOR PALGHAR, WR | Maharashtra | 40.00 Numbers |
| Total | 155 Numbers | |
Supply of light weight special spanner for fish plate bolts, double open-ended type with 15 deg ree jaw angle, having 36 mm and 41 mm sizes at either end, and overall length between 680 mm and 760 m m. The spanner shall be forged, heat treated by controlled oil bath process to achieve 380 - 400 BHN hardne ss, with black phosphated finish. Approximate weight shall be 1300 g +/- 5%. The spanner shall be capable of withstanding minimum 500 Nm torque without breakage or deformation and shall conform to JUS-4835 or equivalent standard, suitable for heavy-duty P.Way field use. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SENIOR SECTION ENGINEER(P.WAY) DADAR, WR | Maharashtra | 26.00 Numbers |
| Total | 26 Numbers | |
Supply of light weight special spanner for fish plate bolts, double open-ended type with 15 deg ree jaw angle, having 32 mm and 36 mm sizes at either end, and overall length between 680 mm and 760 m m. The spanner shall be forged, heat treated by controlled oil bath process to achieve 380 - 400 BHN hardne ss, with black phosphated finish. Approximate weight shall be 1300g +/- 5%. The spanner shall be capable o f withstanding minimum 500 Nm torque without breakage or deformation and shall conform to JUS - 4835 or equivalent standard, suitable for heavy-duty P.Way field use. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| PERMANENT WAY INSPECTOR P W DEPOT VALSAD, WR | Gujarat | 100.00 Numbers |
| Total | 100 Numbers | |
Supply of light weight special spanner for fish plate bolts, double open-ended type with 15 deg ree jaw angle, having 32 mm and 36 mm sizes at either end, and overall length between 680 mm and 760 mm. The spanner shall be forged, heat treated by controlled oil bath process to achieve 380 - 400 BHN hard ness, with black phosphated finish. Approximate weight shall be 1300 g +/- 5%. The spanner shall be capabl e of withstanding minimum 500 Nm torque without breakage or deformation and shall conform to JUS-4835 o r equivalent standard, suitable for heavy-duty P.Way field use. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| PERMANENT WAY INSPECTOR P W DEPOT VALSAD, WR | Gujarat | 100.00 Numbers |
| Total | 100 Numbers | |
Light weight spanner for fish plate bolts as per following specification: (1) Double open ended with 15 degree angle (2) Size 32mm and 36mm at either end. (3) Length 680mm (min) 760mm(Max). (4) Ma nufactured by forging process with black hosphate finishing (5) Heat treatment with controlled oil hath proce ss. hardness of final product 380-400 BHN (6) Approx weight 1300 gm-5% (7) Capacity to habndle 500 NM To rque without breakage special spanner fish plate bolts conforming to JUS-4835 Or similar. [ Warranty Perio d: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| PERMANENT WAY INSPECTOR P W DEPOT VALSAD, WR | Gujarat | 65.00 Numbers |
| Total | 65 Numbers | |
Supply of light weight special spanner for fish plate bolts, double open-ended type with 15degr ee jaw angle, having 36 mm and 41 mm sizes at either end, and overall length between 680 mm and 760 m m. The spanner shall be forged, heat treated by controlled oil bath process to achieve 380 - 400 BHN hardne ss, with black phosphated finish. Approximate weight shall be 1300 g +/- 5%. The spanner shall be capable of withstanding minimum 500 Nm torque without breakage or deformation and shall conform to JUS-4835 or equivalent standard, suitable for heavy-duty P.Way field use. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| PERMANENT WAY INSPECTOR P W DEPOT VALSAD, WR | Gujarat | 100.00 Numbers |
| Total | 100 Numbers | |
Supply of light weight special spanner for fish plate bolts, double open-ended type with 15 deg ree jaw angle, having 36 mm and 41 mm sizes at either end, and overall length between 680 mm and 760 m m. The spanner shall be forged, heat treated by controlled oil bath process to achieve 380 - 400 BHN hardne ss, with black phosphated finish. Approximate weight shall be 1300 g +/- 5%. The spanner shall be capable of withstanding minimum 500 Nm torque without breakage or deformation and shall conform to JUS-4835 or equivalent standard, suitable for heavy-duty P.Way field use. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| PERMANENT WAY INSPECTOR P W DEPOT VALSAD, WR | Gujarat | 100.00 Numbers |
| Total | 100 Numbers | |
Supply of light weight special spanner for fish plate bolts, double open-ended type with 15 deg ree jaw angle, having 36 mm and 41 mm sizes at either end, and overall length between 680 mm and 760 m m. The spanner shall be forged, heat treated by controlled oil bath process to achieve 380 - 400 BHN hardne ss, with black phosphated finish. Approximate weight shall be 1300 g +/- 5%. The spanner shall be capable of withstanding minimum 500 Nm torque without breakage or deformation and shall conform to JUS-4835 or equivalent standard, suitable for heavy-duty P.Way field use. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| PERMANENT WAY INSPECTOR P W DEPOT VALSAD, WR | Gujarat | 65.00 Numbers |
| Total | 65 Numbers | |
Supply of Adjustable Spanner, conforming to IS: 6149-1984, Grade-II, of nominal length 305 m m (12 inches), suitable for tightening and loosening of nuts, bolts and fittings used in railway track, worksho p and maintenance activities. The spanner shall be manufactured from high-strength forged carbon steel or alloy steel, duly heat treated to ensure adequate strength, toughness and resistance to wear. The adjustable jaw shall have smooth and precise movement, with proper jaw alignment and minimum play under load. The spanner shall have a corrosion-resistant finish such as blackened, chrome plated or equivalent, suitable for r epeated heavy-duty field use.Make: Reputed make such as Taparia (Product ID 1173-12 / 1173N-12) or equiv alent. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| PERMANENT WAY INSPECTOR P W DEPOT VALSAD, WR | Gujarat | 100.00 Numbers |
| Total | 100 Numbers | |
Supply of Adjustable Spanner, conforming to IS: 6149-1984, Grade-II, of nominal length 305 m m (12 inches), suitable for tightening and loosening of nuts, bolts and fittings used in railway track, worksho p and maintenance activities. The spanner shall be manufactured from high-strength forged carbon steel or alloy steel, duly heat treated to ensure adequate strength, toughness and resistance to wear. The adjustable jaw shall have smooth and precise movement, with proper jaw alignment and minimum play under load. The spanner shall have a corrosion-resistant finish such as blackened, chrome plated or equivalent, suitable for r epeated heavy-duty field use. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| PERMANENT WAY INSPECTOR P W DEPOT VALSAD, WR | Gujarat | 100.00 Numbers |
| Total | 100 Numbers | |
Supply of Adjustable Spanner, conforming to IS: 6149-1984, Grade-II, of nominal length 305 m m (12 inches), suitable for tightening and loosening of nuts, bolts and fittings used in railway track, worksho p and maintenance activities. The spanner shall be manufactured from high-strength forged carbon steel or alloy steel, duly heat treated to ensure adequate strength, toughness and resistance to wear. The adjustable jaw shall have smooth and precise movement, with proper jaw alignment and minimum play under load. The spanner shall have a corrosion-resistant finish such as blackened, chrome plated or equivalent, suitable for r epeated heavy-duty field use. Make: Reputed make such as Taparia (Product ID 1173-12 / 1173N-12) or equi valent. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| PERMANENT WAY INSPECTOR P W DEPOT VALSAD, WR | Gujarat | 50.00 Numbers |
| Total | 50 Numbers | |
Supply of Round Ring Type Spanner suitable for tightening and loosening of 41 mm fish bolts u sed in railway track fittings, manufactured from high-strength forged steel such as Chrome Vanadium steel o r equivalent carbon steel (EN-8/C45), duly heat treated for strength and durability and suitable for heavy-dut y field use in P.Way maintenance. The spanner shall be of 41 mm size with an overall length of approximatel y 840 mm to provide higher leverage for tightening fish plates and other track fastenings, with an approxima te weight of 3.5 kg. The spanner shall have a blackened/phosphated/painted or equivalent anti-corrosive fini sh and shall be capable of withstanding repeated high-torque applications under field conditions. [ Warrant y Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SENIOR SECTION ENGINEER(P.WAY) DADAR, WR | Maharashtra | 35.00 Numbers |
| Total | 35 Numbers | |
Stainless Steel T-Spanner with socket size 18 mm ( +/- 0.5 mm). The spanner shall be forged f rom high-grade stainless steel (AISI 304 or equivalent), corrosion-resistant, and suitable for outdoor railway c onditions. Overall length shall be minimum 600 mm, providing sufficient leverage for opening and tightening of screws/bolts. Finish shall be smooth, burr-free, and robust for repeated heavy-duty use.Make: Taparia / G edore / or equivalent. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| PERMANENT WAY INSPECTOR P W DEPOT VALSAD, WR | Gujarat | 100.00 Numbers |
| Total | 100 Numbers | |
Stainless Steel T-Spanner with socket size 18 mm (+/- 0.5 mm). The spanner shall be forged fr om high-grade stainless steel (AISI 304 or equivalent), corrosion-resistant, and suitable for outdoor railway c onditions.Overall length shall be minimum 600 mm, providing sufficient leverage for opening and tightening of screws/bolts. Finish shall be smooth, burr-free, and robust for repeated heavy-duty use.Make: Taparia / G edore / or equivalent. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| PERMANENT WAY INSPECTOR P W DEPOT VALSAD, WR | Gujarat | 100.00 Numbers |
| Total | 100 Numbers | |
Stainless Steel T-Spanner with socket size 18 mm (+/- 0.5 mm). The spanner shall be forged fr om high-grade stainless steel (AISI 304 or equivalent), corrosion-resistant, and suitable for outdoor railway c onditions.Overall length shall be minimum 600 mm, providing sufficient leverage for opening and tightening of screws/bolts. Finish shall be smooth, burr-free, and robust for repeated heavy-duty use.Make: Taparia / G edore / or equivalent. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| PERMANENT WAY INSPECTOR PALGHAR, WR | Maharashtra | 80.00 Numbers |
| Total | 80 Numbers | |
Stainless Steel T-Spanner with socket size 18 mm (+/- 0.5 mm). The spanner shall be forged fr om high-grade stainless steel (AISI 304 or equivalent), corrosion-resistant, and suitable for outdoor railway c onditions.Overall length shall be minimum 600 mm, providing sufficient leverage for opening and tightening of screws/bolts. Finish shall be smooth, burr-free, and robust for repeated heavy-duty use.Make: Taparia / G edore / or equivalent. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| PERMANENT WAY INSPECTOR P W DEPOT VALSAD, WR | Gujarat | 65.00 Numbers |
| Total | 65 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .