Supply of Testing equipments to Modernization of Central Laboratory PWD Zone Kota

Amount

Universal Penetrometer for LL & BT Penetration The unit is compact with in-built timer to control duration of penetration preset in factory to 5 seconds. The instrument is provided levelling screws. Ref. Standards IS: 1448 (Part 60), ASTM D 937, IP 179, BS: 4698, ASTM D217, IP 50, ISO 2137.For empirical estimation of the consistency of lubricating grease and petroleum. Made of brass with a hardened steel tip. The stem of the cone is interchangeable with all types of Penetrometers manufactured to close tolerances, providing a unified cone and ensuring that there is no shoulder between the tip and the body. Weight : 102.5 ± 0.05g Bitumen Penetration Kit Penetration Needle Transfer Dish made of copper. Aluminium Sample Containers, Set of two.

Supply, Installation and Commisloning Including Calibration of CBR Digital testing Apparatus with all accessorles without mould to meet requirments as per is 2720 Part XVI complete in all respects.

Digital Modified Marshall Apparatus 50kN, Single speed,New model for 6” dia sample and 4” dia sample

Ductility Testing Machine with digital display & cooling Designed to test three specimens simultaneously. The machine consists of a carriage moving over a lead screw. An electric motor driven reduction gear unit ensures smooth constant speed and continuous operation. The entire assembly is mounted with water bath completely encased in metal bound hardwood. It is equipped with an electric pump circulator and heater. The temperature is controlled by digital temperature controller. Two rates of travel i.e. 5 cm/min and 1cm/min are provided. Suitable for operation on 220 V, 50 Hz, Single Phase, AC supply. Ductility Mould, with Base Plate 4Nos. As per IS: 1208, ASTMD113, AASHO751

Ring and Ball Apparatus Compact user friendly and has better aesthetics. It has magnetic stirrer with heating facility and digital display of temperature, the heating can be adjusted through knob. Each unit is supplied with a bath of heat resistant glass and the following : Tapered Rings 2 Nos. Ball Centring Guide 2 Nos. Steel Balls of 9.5 mm dia 2 Nos. Ring holder 1 No. Electric Heater (Hot Plate) 1 No.

Supply, Installation and Commlsioning of Flash and Fire Point Apparatus (Close cup) for testing the Quallty of Bituman to meet requirments as per IS3209-1978 complete in all respects.

Saybolt Viscometer Apparatus Ref. Standards - ASTM D88, D 244, AASHTO T 72 For the empirical measurement of Saybolt Viscosity of petroleum products at specified temperatures between70oF and 210 F. This is also used for determining the Saybolt Furol viscosity of bituminous materials at temperatures of 250, 275, 300, 350, 400 and 450°F. It Comprises one each of Cylindrical Oil Cup, Universal Tip, Furol Tip, Bath fitted with immersion heater mounted on a stand, Dimmer stat for temperature control, Stirrer with shield. Apparatus is supplied complete with insulated handle and thermometer support, receiving flask, withdrawal tube, filter funnel, thermometer support for cup and circular spirit level. Suitable for operation on 220 V, 50 Hz, Single Phase.

Centrifuge Extractor, Capacity 1500g Electrically Operated The new design of centrifuge extractor is compact within built dimmer stat for speed variation from 0 rpm to 3600 rpm. Each unit is supplied complete with a set of 25 Filter Paper Discs. Suitable for operation on 220 V, 50 Hz, Single Phase, AC supply.

Standard Penetration Test kit (Core Cutter Assembly) Standard penetration test The equipment consist of the follwing replaceable parts Split Spoon Sampler 50.8 mm OD and 38 mm ID 1 No This sampler sonsists of Body split lengthwise 1 no shoehardened withanisdecultingedge 1 No Head fitted with a ball check valve and adapter to connect 'A' type drill rod 1 No. Drive Weight cast iron 63.5 kg 78 mm bore ID Approx 1 No Guide pipe assembly bore 73 mm OD approx AIM 022 Tripod with Pulley adn built in ladder 1 No Type Drill Rods 0.5 mtrs 1 No Manlla rope 19mm dia 10 meter long 1 No Controller This la

Supply and Fixing Weighing Scale 500gm with accuracy 0.001 g shall be provided with NABL Approved callibriation certificate

Water Bath, Double Walled, with Digital Controller Cum Indicator with stirring arrangement, inside Stainless Steel, Temp. range amb.+5°C to 80°C +/- 0.2°C

Capping Gypsum Compressive Strength : 560kgf/cm2 (56 Mpa or 8000 psi) with glass plates. As per Ref IS: 516

Supply and Fixing Standard Penetration Kit (core- Cutter assembly without Generator shall be provided with NABL Approved certificate Engine 5.5Hp Capacity, Drillout Core Sample Upto 150mm Dia x 400mm Depth, Diamond Core Cutting Bit And Barrel 100mm Dia x 200mm Depth

Humidity Fire Equipment, Due Humidity Fire with Digital Display Controller

Supply and fixing Measuring cylinder 200 ml, Galss plate, piunger of 10 mm dia, stop watch, base plate Glass plate size 450x450x10mm base plate ss 304 Digital stop clock cum timeer 1/1000 second with NABL calibriation certificate

Integral Type compression proving Ring Dial auge 25 and 100 Ton

Digital Room Thermometer with humidity Indicator

Pycnometer {should be as per IS: 2386 (Part 3)}

Supply and Fixing Deslcators Set with plastic knob 150mm shall be provided with callibration certificate

Riffle Box/Riffle sample divider 16 slot

Infrared Moisture Meter

Crushing Mould Big and Smalll/Crushing value appartus

Micro Controller Based Compression Testing Machine Capacity 3000 KN with Touch Panel Display and flexure testing attachment 100 KN Automatic Pace Rate Controller Operation of a Micro Controller based Compression Testing Machine is controlled by an intelligent Pace Rate Controller. This facilitates Automatic Pace Rate Control, Data Logging, Data Printing, Load Hold etc. It has a full 3term PID feedback control which uses a high torque Stepper Motor. It consists of a Loading Unit, an Electrically Operated Hydraulic Pump & an Intelligent Pace Rate Controller. Compression Testing Machine with digital display, this machine has automatic pace rate control with the facility of data logging, storage& printing for analysis. The operation of the machine is detailed in the operating manual supplied with the machine. The operation is user friendly with a menu driven interface and prompts for an operator. Key Features • Meets the Exceeds specifications of IS 14858 (2000),Machines Conforming to ASTM C-39, AASHTO T-22,BS, • Automatic Pace Rate Control at a preset value. • Pace deviation bar graph. • Automatic stress determination and display. • Overload safety protection.

Supply, installation and Commisoning of solubilty test Apparatus for testing the solubility of Bitumen to meet requirments as per IS-123-1978 complete in all respects.

Supply, installation and commisiloning of Solubility Test Apparatous for testing the Solubility of Bitumen to meet requlrment as per IS-1216-1978 complete in all respects.

Digital Room Thermometer with humidity Indicator

Automatic Compactor for Bituminous Mixes Of 4’’ And 6’’ Dia Samples Ref. EN 12697-10-30 • Rugged construction to withstand hard work. • Fully automatic and easy to operate. • Uniform compaction. • Automatic Blow Counter. The Automatic compactor eliminates the laborious process of manual compaction and allows achievement of even degree of compaction is achieved. The drive mechanism lifts the weight of 4.5 kg and drops it through a height of 457 mm. The rammer foot is removable, which facilitates preheating. A compaction pedestal with specimen holder is fixed to the base. An automatic blow counter enables the number of blows to be preset before each test and automatically stops the machine on completion. Suitable for operation on 230 V, 50 Hz, single phase, AC supply. Ref. Standard ASTM – D5581:1996, D 6926-04 The equipment is used for measurement of the resistance to plastic flow of cylindrical specimen of bituminous mixes. • Weight of rammer - 10.2 Kg • Provision for accommodating - 6” mould specimen

Universal Testing Machine Computerised Capacity (1000 ton) and Piller type with Hydraulic jaws Operationj of a Micro Controller oasea Universal Testing Machine is Controlled by an intelligent pace rate controller this facilitated Automatice pace rate contral data logging data printing load hold etc it has a full 3 term PID feed back control which uses as high torque stepper motor it consists of a loading unit an electrikcally operated Hydrolic pump and an intelligent pace rate controller in addition to all the features of universal testing machine with digital display the machine has automatice pace rate control with the facility of data logging storage and printing for analysis the operation of the machine is detailed in the operationg manual supplied with the machine the operation is user friendly with a menu driven interface and prompts for an operator Min clearance between platens 370 mm Max horizontal clearance 340mm platen size 222 sqm mm Specimen size 100mm and 150mm cube 100mm and 150 mm dia cylinder.

Supply and Fixing Digital Vernier caliper 12" shall be provided with NABL Approved callibriation certificate

Supply, installation and Commisloning of ARRB-IV Roughometer with DMI cable for testing the Roughness and undulation of road to meet requrment as per IRC: SP-16-2019 completer in all respects with sultabel computer and Printer.