Construction of access road to ESS AND 30 m road Providing and Laying f Interlocking Tiles on Kaccha Portion of 30m Road in Sector-162 Noida

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. 304 (3.13-ib)

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Construction of sranular sub-base by provkllna close araded material, spra1dln11 In uniform layers with motor grader on prepared surface, mbclng by· mix In place method with front end loadar at OMC. and compactln1 with vibratory rolier to achieve the desired density, complate as per clause 401

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam (wmm) specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.. 406(4.12)

Earth work in embankment in ordinary soil embankment to be in 20cm layer including ramming dressing the surface to required levels with half tonne steel or wooden rammer and rolling every third and top most layer in roller 8 to 10 tonne capacity and including 1.50mtr, lift and all lead (earth shall be brought from a place with including cartage of earth by mechanically transport and T & P Labour etc required for proper completion earth shall be arranged by the contractor at his own cost.

M-150 Brick Work in 1:4 Cement & Coarse sand of 2.20 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work

12 mm cement plaster of mix 1:4(1 cement: 4 coarse sand)

Neat cement punning. including supply all materials, labour and T & P etc. Complete as per direction of Engineer in Charge.

Plain/ Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M30 using batching plant transit mixer & manual placing (9.14 G,case-II)

Plain/ Reinforced Cement Concrete for wall & slab etc. complete as per Drawing and Technical Specifications. C-RCC Grade M30 using batching plant transit mixer & Concrete pump (9.15 C)