Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.1 LAccepted-AOC VILL BOHAN P O JAWALAMUKHI TEHSIL JAWALAMUKHI DISTT KANGRA H P | KANGRA | HIMACHAL PRADESH | 175013 | L1 | Accepted-AOC L1 lowest Bidder | |
| 2 | L2₹33.3 L+₹21,685 (0.65%)Rejected-Finance | L2 | Rejected-Finance Higest Bidder | |
| 3 | L3₹37.0 L+₹3.9 L (11.7%)Rejected-Finance | L3 | Rejected-Finance Higest Bidder |
Tender Value
₹38.2 L
EMD Value
₹77,000
Closing Date
2 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
HP,PWD Division Dehra
Construction of Three Rooms in Ground floor and two rooms in 1st Floor with verandah
2023_PWD_80633_2
EE Dehra letter No.8734-40 dt.13.10.2023
Open Tender
Civil Works
Item Rate
180 days
Dehra
Please referred to tender documents
10 documents required · 10 mandatory
₹1,500
₹77,000
29 Nov 2023
26 Oct 2023
3 Nov 2023
26 Oct 2023
2 Nov 2023
26 Oct 2023
Amount
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) in foundation and plinth above plinth level upto all floor level in cement mortar 1:6 (one cement isto six sand) and curing complete including carriage of material within all leads, lifts and other incidental, or as directed by the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax and any other taxes imposed by the Government.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of material within all leads, lifts and other incidental, or as directed by the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax and any other taxes imposed by the Government.
Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete :25mm thick including carriage of material within all leads, lifts and other incidental, or as directed by the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax and any other taxes imposed by the Government.
Providing and fixing M.S. grills (TATA/SAIL)of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer Fixed to steel windows by welding .all complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government
P/F 12 mm thick prelaminated board both side bwp phenol bonded exterior/interior grade panalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 40 mm thick frame complete including carriage of material within all leads, lifts and other incidental, or as directed by the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax and any other taxes imposed by the Government.
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : including carriage of material within all leads, lifts and other incidental, or as directed by the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax and any other taxes imposed by the Government.
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :200x10mm etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :100x10mm. etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
Providing and fixing 125mm (one hundred twenty five millimeters)fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.
Providing and fixing 100mm (one hundred twenty five millimeters)fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.
Providing and fixing 150mm (one hundred fifty millimeters) M.S. hooks and eyes complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government
Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the hade of the tiles, including rubbing and polishing omplete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) : Medium shade pigment using 50% white ement and 50% ordinary cement complete including carriage of material within all leads, lifts and other incidental, or as directed by the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax and any other taxes imposed by the Government.
Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of material within all leads, lifts and other incidental, or as directed by the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax and any other taxes imposed by the Government.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. complete with all accesseries as required as per direction of Engineer-in-Charge, including carriage of materials within all leads and lifts complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
Provding and fixing m.s holder bat clamps of approved design to C.L or S.C .L pipes embeded in and including cement concrete blocks 10X10X10 cm of 1:2:4 mix (1 cement 2 sand 4 stone grade stone aggregate 20 mm nominal size) and cost of cutting holes and making good the well etc 100 mm diametre complete with all accesseries as required as per direction of Engineer-in-Charge, including carriage of materials within all leads and lifts complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
Providing and fixing on well face pvc (d-plast) accessories for rain water including feeling the joints with approved adhesive complete PVC plain shoe 110 mm dia . complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government
Providing and fixing on well face pvc (d-plast) accessories for rain water including feeling the joints with approved adhesive complete PVC shoe 110 mm dia complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Fixing with adjustable lugs with split end tail to each jamb. complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government
Providing and fixing steel glazed doors windows and ventilators of standerd rolled steel sections joints mitred and welded with 16 x3 .15 mm lugs 10 cm . Long embedded in cement concrete blocks 15 cm x10 cmx10 cm size of 1:3:6(1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size ) or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fitting , including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint. Fixed steel windows etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government .( Fixed steel windows )
Providing and fixing steel glazed doors windows and ventilators of standerd rolled steel sections joints mitred and welded with 16 x3 .15 mm lugs 10 cm . Long embedded in cement concrete blocks 15 cm x10 cmx10 cm size of 1:3:6(1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size ) or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fitting , including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint. Top hung ventilators etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.( Top hung ventilators )
Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately)complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement isto three sand), up to all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.
Providing and applying 15mm (fifteen millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers or rounded angles in all girth and finished even and smooth as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Providing and applying 15mm (fifteen millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers or rounded angles in all girth and finished even and smooth as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Applying priming coat over new wood and wood based surfaces after and including prepering the surface by throughly cleaning oil, grease, dirt and other foreign matter sand papering and kotting with ready mixed paint brushing wood priming pink. and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
White washing with lime on celling and/or sloping roofs two coats to give an even shade including throughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Distempering with oil bound washable distemper of (Nerolac/Asian/Dulux/Berger) approved brand and manufacture (two or more coats) of required shade on new work over and including water thinnable priming coat with cement primer to give an even shade complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Providing and fixing oxidized M.S. hasps and stapples (safety type) with necessary screws etc. complete 150mm complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government
Providing under layer for plinth protechtion of 75 mm thick ( unconsolidated) bed dry brick/stone aggregated 40 mm nominal size with rmmed and consolidated and grouted with fine sand including preparation of ground complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Constructing Course rubble hammer dressed 'U shape open surface drain with side wall 15x22 cm in cement mortar 1:6 (1 Cement 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5 10 (1 Cement 5 Sand 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement 2 Sand 4 Graded stone aggregate of 20 mm 39 nominal size) and finished with a floating coat of neat cement complete as per standard design .complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Providing and fixing M.S.fan clamp type -1 of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C slab 12 during laying including painting the exposed portion of loop, all as per standard design complete.as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer,as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel of TATA/SAIL as required In trusses,gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST or any other taxes imposed by the Government.
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m²² complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST or any other taxes imposed by the Government.
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers omplete0.63 mm thick with zinc coating not less than 275 gm/m² as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST or any other taxes imposed by the Government.
Providing and fixing MS. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, 29.29 fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely)as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST or any other taxes imposed by the Government.
Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm)complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Providing and fixing M.S. railing for ramp having 50mm dia M.S. pipe handrail slip resistant with round ends at 13.40 two level at 75 cm & 90 cm height and should be extend 30 cm beyond the top and bottom of the railing with 25mm dia M.S. pipe ballusters welded to 50mm dia M.S. pipe embedded in cement concrete at 60 centimetre centre to centre duly weldded with MS flat 50 X 5mm including and applying a coat of red lead paint complete in all respect complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Rishav
ROHIT KASHYAP
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .