WBPWD/AE/PESD-II/e-NIQ-20 of 2023-24

Amount

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC Average run 8 mtr

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC On Board

Average run 4.5 mtr

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board andbakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment 2+12 way Make:-Legrand Enclosure (607712) [D-9/13]

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment 4 Way [D-9/11]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection 6-32 A SP Make:-Legrand [D-6/7]

6-32 A DP Make:-Legrand [D-6/7]

Supply of following 1.1 Kv grade XLPE insulated Armoured Aluminium cables- 2 core 6 sqmm cable for roof top light and Exhisting building to main switch connection [ Make- Gloster/Polycab/ KEI] [NS]

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc. [F-3/5(i)]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : upto 2 core 6 sqmm [F-4/7(a)]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 2 core 6 sqmm cable [F-5/8(b)(ii)]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 1.5sqmm [NS]

2.5sqmm [F-5/9(i)]

4 sqmm [F-5/9(ii)]

6 sqmm [F-5/9(iii)]

Supplying and Drawing 1.1 KV single core stranded 'FR'PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 3 x 22/0.3 (1.5 sqmm) [E-9/1(b)]

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC [E-9/1(s)] for Computer and power point

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC [E-9/1(v)] for Main switch to SPNDB

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles 19 mm dia 3 mm thick polythene pipe without earth continuity wire [E-3/6(a)]

Supply of 4' single LED tube light (Make:- Philips, Master LED tube 1200 mm 18W 865 T 8 I- 2100 lumen or equivalent make of Bajaj/Havells )[NS]

Supply of 4' twin LED tube light with complete set (Make:- Philips TMC 501 P 2xT-LED 22W P3242, including Master LED tube 1200 mm 18W 865 T 8 I- 2100 lumen or equivalent make of Bajaj/Havells )[NS]

Spply of 230 V, AC Ceiling fan complete with blade, canopy, down rod upto 1 ft.1200 mm (48") sweep, [Make- ORIENT New Breeze or Usha or Havells] [NS]

Supply of 9'' sweep AC exhaust fan (EPC heavy duty) 1370 r.p.m. . [NS]

Supply of 45W LED street light of following specifications on the roof top -[Make-Crompton, Cat No. TRP-409-45-57-SL-GL-NSG Or equivalent make of Bajaj/Phillips [NS ]

Supplying & Fixing LED bulk head light fitting (Make:-Philips, Model:-WT140W LED or equivalent make of Bajaj/Havells/Crompton )

Supply of 10W LED lamp (Make:- Bajaj/Crompton/ Philips / Havells ) [NS]

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [C-2/17]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [C-3/21(a)]

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 23 cm (9") [C-4/28(a)]

Supply & Fixing louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long) 23 cm (9") [ for Al] [D-14/32(a)]

Fixing only lamp [C-2/11]

Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box. [D-14/31]

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. [E-6/18(a)]

S & F 80mm. (3”) dia x 2 mtrs. Long G.I mini pole (ISI-M) with welded base plate of 225mm. x 225mm. x 6mm. thick with necy. holes for HPSV/LED light fittings incl providing (6:3:1) base block dimension 0.45x0.45x0.60 mtr above from ground leavel cemented 3 mm thick incl 8"x 6"x 4" GI loop box as per direction of E.I.C. including Supply and laying 3 x 1.5 sqmm FRLS copper conductor PVC insulated from loop box to light fittings via Mini pole and Arm bracket including painting of pole and Arm bracket including S & F 40mm dia 1.5mtr long GI Arm Bracket.

Supply & Fixing two nos of 240 V, 20 A Piano key type switch (Brand approved by EIC) with 1 no 6A MCB on sheet metal switch board incl. S & F 200x150x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. for Street Light [NS]

Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil [G-1/1(b)]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe [G-1/2(a)]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. [G-2/4(a)]

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages Solid GI Wire No. 4 SWG [G-2/5(a)(i)]

SAIBAL SARKAR

DEB SHANKAR LAYEK