ANNUAL RATE CONTRACT FOR PROVIDING AND REPAIRING SIGNAGES FOR BRTS BUS SHELTERS, MARKER POLE AND CITY BUS STOPS NORTH (KATARGAM) ZONE, WEST (RANDER) ZONE AND CENTRAL ZONE IN SURAT CITY.

NAME OF WORK :- ANNUAL RATE CONTRACT FOR PROVIDING AND REPAIRING SIGNAGES FOR BRTS BUS SHELTERS,

MARKER POLE AND CITY BUS STOPS NORTH (KATARGAM) ZONE, WEST (RANDER) ZONE AND CENTRAL ZONE IN SURAT

Item Description Quanity Rate Unit Amount

Excavation for foundation includ.sorting out & stacking of useful materials &

1 disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc.

Comp. (A) Loose or Soft soil. Executed With Manual Labours

(1) Up to 1.5 Mt. depth 6.00 212.52 C.M.

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded stone

agg. 20 mm nominal size)& curing comp. Includ.cost of form work but exclu.

2 Cost of reinforcement for reinforced concrete work in : (A) Foundation, 6.00 4250.50 C.M.

footing, Base of columns and Mass concrete.

Providing & fixing Aluminium Composite panel of alum decor, Indobond &

Flexibond make to all Sufaces 4mm thick in required colours of exterior

consisting of two layers of aluminium skins of 0.25mm thick sandwiching a

thermo plastic core in continuous lamination process with PVDF coating of

exterior grades ensuring long life colour and fungal resistance. Base frame

work with aluminium sections shall be fixed over the all surfaces, ACP shall

be fixed to the frame work as cladding it includes cost of labour , Materials

,accessories,adhesive, scaffolding,wastages, transport,taxes,fixing into a neat

finish in aesthetic point of view, without any undulations in facias all complete

as per drawing and instruction of engineeer in-charge.

Providing and sticking vinyl with eight colour eco solvent and epson printing.

The Vinyl shall be of 100 microns 3M media. The vinyl shall be laminated by

80 microns film after the printing and before sticking. The sample of the same

shall be approved by the Engineer-in-charge and shall be stuck in line and level

without any crease or bubbles on the prelaminated board / acrylic sheet using

3M adhesives surface. The graphics shall be provided. The contractor shall

4 check the graphic size and the available surface before printing. The 3M vinyl 800.00 754.32 S.M.

signage shall be stuck firmly on 3mm thick SS 304L grade sheet as per

designs. The sheet shall be firmly fixed using SS 20mm dia studs as per the

designs. The contractor shall ensure that the signage sheets are fixed in correct

line, level and plumb. The rates shall be excluding SS sheet but including

signage material including fixing and other related costs like transportation,

electricity etc.

Providing and fixing of flex signage with printing for external use and with

uniformity so that the same can be backlit. The flex is to be fixed neatly with

adhesive to M.S. frame, stretched in line and level. The flex to be 15 ounce of

5 LG Media for backlit and printed on vientech machine. The graphic size is to 130.00 924.00 S.M.

be cross checked with the area available before printing. The graphic shall be

Providing and erecting on site 6mm thick colour acrylic sheet with 3M make

Defuser film of UV resistant type with graphic profile cut in colour acrylic.

The entire surface shall be water proof and air tight with necessary gaskets.

6 The corners shall be properly made. The acrylic to acrylic joints at the corners 33.00 3069.00 S.M.

shall be evenly chamfered before sticking. The item includes necessary

hardware to fix the acrylic signage to the MS structure. Do as specified by

Engineer in Charge.

Providing and fixing in position 10mm thick acrylic sheet UV resistant as per

designs on ETM counters for signages. The acrylic sheet shall be firmly

screwed to the M.S. members so as to withstand wind speeds upto 47m/s. The

7 joints of the sheets shall be well champhered and jointed using silicone 33.00 4593.00 S.M.

sealants of Dow corning. The rates shall be inclusive of all kinds of

scaffolding, staging, tools, tackles, hardware and adhesives. The work shall be

done to the complete satisfaction of the Engineer in charge.

Providing and fixing in position 8mm thick acrylic sheet UV resistant as per

designs on ETM counters for signages. The acrylic sheet shall be firmly

screwed to the M.S. members so as to withstand wind speeds upto 47m/s. The

8 joints of the sheets shall be well champhered and jointed using silicone 165.00 3720.00 S.M.

sealants of Dow corning. The rates shall be inclusive of all kinds of

scaffolding, staging, tools, tackles, hardware and adhesives. The work shall be

done to the complete satisfaction of the Engineer in charge.

Item Description Quanity Rate Unit Amount

Fabricating, supplying, cutting, bending and fixing GI plain sheet JINDAL /

HINDALCO make or equivalent of 1mm / 2mm / 3mm thickness fixed to MS

framing with S.S. screws in counter sunk / S.S. rivets, S.S washers, necessary

9 accessories and hardware complete as per detailed drawing and design. (Only 65.00 88.00 KG

finished measurements shall be paid., M.S. framing shall not be part of this

item.) The sheet type shall be finalised by the Engineer in charge.

Providing, erecting and fixing in position structural steel sections of Yst

grade of TATA, Kamdhenu, Jindal of Asian confirming to IS:4923 purlins,

roof trusses, columns, side runners, ties, bracings, framing etc, including all

types of base plate, gusset plate, cap plate, bearing plate, stiffner, cleats etc.

complete and structural steel confirming to IS:226 including necessary pipes,

rolled joists, channels, angles, tees, MS flats, angle cleats, gusset plate, bright

bars, chequered plates, cross plates as per required thickness including cutting,

10 welding, riveting as per structural details and good engineering practice 650.00 90.47 KG

grinding and cleaning the members as specified by Engineer in charge. (only

finished measurements shall be paid for billing purpose). No extra payment

shall be made for grouting that has to be done under the base plate to get full

bearing on supporting sub strata. The paint shall be oil paint in three coats to

get an even look over a coat of red lead paint as per the instruction of the

engineer-in-charge. The rate shall also be inclusive of screws, bolts, nuts,

washers, hinges, pivots etc.

Remove Eco Vinayl from Existing Marker pole, BRTS Bus shelter and City

11 Bus Stop 335.00 124.00 S.M.

SIGNATURE OF THE CONTRACTOR.

EXECUTIVE ENGINEER

TRAFFIC BRTS PROJECT CELL

SURAT MUNICIPAL CORPORATION