Loading
Loading…
Loading…
Tender Value
₹12.1 L
EMD Value
₹24,240
Closing Date
29 Aug 2026, 4:00 pm2d left
EXECUTIVE ENGINEER WSMP DIVISION SGR
OFFICE OF THE EXECUTIVE ENGINEER WSMP DIVISION SGR
Augmentation of Existing Wornout Pipes Placement of Water Supply in Various Places of Master Plan Areas UNDER District CAPEX.
2026_PHE_320866_1
E-NIT No.14/WSMP of 07-2026 Date-13/08/2026
Open Tender
Civil Works - Water Works
Percentage
30 days
SRINAGAR
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
EXECUTIVE ENGINEER WSMP DIVISION SGR
₹24,240
Yes
13 Aug 2026
13 Aug 2026
31 Aug 2026
13 Aug 2026
29 Aug 2026
13 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling manually/ mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: Bituminous road. | - | Sqm | 1 | - |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soils. | 1 | Cum | - | - |
| 3 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed 1 meter from cutting edge: All kinds of soils. | - | Cum | - | - |
| 4 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work.
I. 80 mm dia nominal bore | - | Mtr | 1 | - |
| 5 | II. 65 mm dia nominal bore | - | Mtr | 1 | - |
| 6 | II. 50 mm dia nominal bore | - | Mtr | - | - |
| 7 | II. 40 mm dia nominal bore | - | Mtr | - | - |
| 8 | V. 25 mm dia nominal bore | - | Mtr | - | - |
| 9 | VI. 20 mm dia nominal bore | - | Mtr | - | - |
| 10 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
I. 80 mm dia. nominal bore | - | No | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.53 MB
BOQ_1068147.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].