SPECIAL REPAIRS TO SNCOs LIVING ACCN BLDG NO P 6/1, P 6/2, P 6/3 AND PROVN OF CERTAIN SANCTIONED WORKS AT AF STATION CHANDIGARH

Amount

Building Work

Taking down cement plaster of any description on brick or concrete surfaces of wall/ceiling and the like including racking out joints, hacking for keys, scrubbing down with water complete all as specified and as directed. Note : The quoted rates shall deemed to be included for necessary scafolding and form works. Nothing extra shall be admissible on this account.

Demolition of brick work built in cement mortar including all quoins arches, pillars etc complete all as specified and as directed.

M&L for brick work with old size sub class “B” bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

M&L for brick work with old size sub class “B” bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 (EXCEPT BRICKS) complete all as specified and as directed. Note:- Serviceable bricks retrieved against item No 3 here-in-before shall be reused after removal of mortar & proper cleaning.

M&L for brick work with old size sub class “B” bricks straight or curved on plan exc. 6mtr mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work with old size sub class “B” bricks straight or curved on plan exc. 6mtr mean radius built in CM 1:6 (EXCEPT BRICKS) complete all as specified and as directed. Note:- Serviceable bricks retrieved against item No 3 here-in-before shall be reused after removal of mortar & proper cleaning.

M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and fair without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar (1:3) on concrete surfaces (such as chajjas, balcony, mumty and staircase flight ceiling etc.) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered/unplastered surfaces of wall and applying two coats of water based distemper over 1mm thick wall care putty to smoothening the surface over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered/unplastered ceiling surfaces of any description and applying three coats of white wash complete all as specified and as directed.

M&L for Preparation of new plastered/unplastered wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of shade as approved by the GE (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer (of same manufacturer) applied @ 0.90 litre/10 sqm complete all as specified and as directed.

Complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of shade as approved by the GE (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer (of same manufacturer) applied @ 0.90 litre/10 sqm complete all as specified and as directed. Note for item No 13 & 14:- Weather proof exterior emulsion paint and primer shall be of the same manufacturer.

M&L for complete removal of existing treatment on walls by wire brushes etc and applying two coats of water based distemper over 1mm thick wall care putty to smoothening the surface over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment of ceilings by wire brushes etc and applying two coats of water based distemper over 1mm thick wall care putty to smoothening the surface over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment of ceilings by wire brushes etc and applying three coats of white wash complete all as specified and as directed.

M&L for prepartation of old painted wooden surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for prepartation of old painted steel or iron surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for cutting out cracks to V-section in existing RCC roofs or terracing etc, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.

M&L for roughening/preparing of surfaces of concrete floor/slab/wall etc by wire brushing, sweeping, cleaning and washing down to remove all loose dust etc and brushing neat cement slurry @ 3.00 kg/Sqm complete all as specified and as directed.

Dismantling floor, health or wall tilling including cement mortar bedding (but not backing), removing debris out side the MOD land to a designated place earmarked by the by local administration complete all as specified and as directed.

Demolition of lime concrete/lean concrete/brick bats from floor/sunken portion exc. 15 cm thickness (above ground level) and removing debris out side the MOD land to a designated place earmarked by the by local administration complete all as specified and as directed.

M&L for Water proofing treatment to sunken portion of WCs and bathroom etc. by applying cement slurry mixed with Acrylic based polymer modified cementitious composite compound coating of make as approved in Technical Instruction 5/ 2003 as follows:- (a) 15 mm thick rendering in cement sand mortar (1:4) mixed with integral water proofing compound @ 2 % by weight of cement on floor and walls, finishing the surfaces even and smooth without using extra cement. The surface shall then be cured and allowed to dry. (b) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm. This layer shall be allowed to air cure for 4 hrs. (c) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.126 Kg/Sqm. This layer shall be allowed to air cure for 4 hours followed with water curing for 48 hours. Note: Water proofing compound shall be measured and paid separately as supply only.

M&L for Plain cement concrete (1:5:10) type E-2, using 40 mm graded brick aggregates as in filling to sunken portion/sub base of floors complete all as specified and as directed.

M&L for 25 mm thick PCC (1:2:4), type B-0 using 12.5mm graded crushed stone aggregate as in flooring finished even & rough to receive the bedding mortar/topping layer complete all as specified and as directed.

Supply only liquid water proofing compound of approved make complete all as specified and as directed.

S&F 40 mm bore Steel water tubes galvanised, medium grade, as in spout for sunken floor, fixed in wall, inside end fixed with wire netting and external beveled edge at 45 degree complete all as specified and as directed.

Taking down Chowkhats with shutters without taking of shutter from the frame of any description exceeding 1.50 Sqm but not exceeding 4.00 Sqm each and making good the disturbed portion by plastering in CM 1:4/tilling work as per existing specifications complete all as specified and as directed. Note for Item Nos 29 & 30 :The quoted rates shall deemed to be included for plastering/tilling work as required for making good of existing surface. Nothing extra shall be admissible on this account.

Taking down Chowkhats with shutters without taking of shutter from the frame of any description not exceeding 1.50 Sqm each and making good the disturbed portion by plastering in CM 1:4/tilling work as per existing specifications complete all as specified and as directed.

Taking down Shutters of any description exc 1 sqm and n exc 2 sqm each and making good the disturbed portion in CM 1:4 & finished the surface as per existing specifications complete all as specified and as directed.

Taking down and Refixing Shutters (in the same opening) of any description exc 1 sqm and n exc 2 sqm each after easing and adjusting also refixing builders hardware as required including renewal of unserviceable screws etc complete all as specified and as directed.

S&F factory made pressed steel frames for doors with one or more rebates of size 125mmx60mm, made out of 1.25mm thick sheet, including necessary fixing lugs, hinges, lock strike plate, with & including backfilling of chowkhats in cement concrete 1:2:4 (type Bo) using 12.50 mm graded stone aggregate complete all as specified and as directed.

S&F factory made pressed steel frames for doors with one or more rebates of size 165mmx60mm made out of 1.25mm thick sheet including necessary fixing lugs, hinges, lock strike plate, with and including backfilling of chowkhat in cement concrete 1:2:4 (type B0) using 12.50 mm graded stone aggregate complete all as specified and as directed.

S&F 30mm thick Factory made Flush shutters (Double leaf), solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

S&F 35 mm thick 2nd class hardwood (Hollock) glazed and skeleton shutters, open rebated and prepared to receive wire cloth, glass etc. (without Sash Bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire cloth etc., sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc., drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming to FE-290 (Gde E-165) complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with and including MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisturproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 125mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 100mm size Stainless steel butt hinges of approved make complete all as specified and as directed.

S&F Factory made box type steel windows with pintol hinges, 2 Nos 150mm mild steel tower bolts to each shutter, steel handle including holdfasts with glazing bars, dovetailed or Welded and one shop coat of zinc chromate primer with and including cutting holes for holdfast and making good to disturbed area in cement mortar 1:4 complete all as specified and shown on Drawing No CEAF/STD-184-2012 Sheets 1/3 & 3/3.

S&F Factory made box type steel windows with pintol hinges, 2 Nos 150mm mild steel tower bolts to each shutter, steel handle including holdfasts without glazing bars, including flat iron 12 x 3 mm for securing wire mesh, dovetailed or welded and one shop coat of zinc chromate primer with and including cutting holes for holdfast and making good to disturbed area in cement mortar 1:4 complete all as specified and shown on Drawing No CEAF/STD-185-2012 Sheets 1/2 & 2/2.

S&F Factory made box type steel ventilator fixed type, dovetailed or welded and with over one shop coat of zinc chromate primer, including holdfast with and including cutting holes for holdfast and making good to disturbed area in cement mortar 1:4 complete all as specified and shown on Drawing No CEAF/STD-186-2012 Sheets 1/1.

M&L for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders, framed balusters; walk ways; railings; and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F 3mm thick Plain Sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified and as directed.

S&F 3mm thick figured glass, pin headed type not exceeding 0.5 Sq. m in each pane complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, not otherwise described, over10cm width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide complete all as specified and as directed.

Hacking out old broken glass from metal frame or wooden frames incl punching or drilling out old glazing pins/spring clips of any area complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

S&F 100 mm size MS butt hinges medium weight cold rolled complete all as specified and as directed.

S&F 150mm size aluminum handle, 'D' type, anodized, ISI marked complete all as specified and as directed.

S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and as directed.

S&F 250 mm size MS door spring including roller and roller plate by means of welding complete all as specified and as directed.

S&F 250 mm size MS door spring including roller and roller plate by means of welding as in repair/replacement complete all as specified and as directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples fixed as in repair/replacement complete all as specified and as directed.

S&F door stopper aluminium alloy body with rubber shoes of size not less than 140mm fixed in bottom rail of shutter complete all as specified and as directed

S&F MS Chromium plated curtain rod 25 mm dia with and including MS Chromium plated decorative round finials on either ends and having a visually balanced appearance and MS Chromium plated brackets fixed to wall with 30mm wooden steel screws and PVC rawal plug anchors fixed as in repairs/replacement complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc complete all as specified and as directed.

Cutting chases, pinning in brick walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth for GI/PVC pipes complete all as specified and as directed.

S&F Steel water tubes, 15 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and as directed.

Refixing old steel tubing with new fittings/connections in new or old position (Walls, ceiling, floors) 15mm bore of pipe complete all as specified and as directed. Note:- Serviceable pipe retrieved against item No 61 here-in-before shall be reused after proper cleaning.

S&F Steel water tubes, 20mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and as directed.

Refixing old steel tubing with new fittings/connections in new or old position (Walls, ceiling, floors) 20mm bore of pipe complete all as specified and as directed. Note:- Serviceable pipe retrieved against item No 62 here-in-before shall be reused after proper cleaning.

S&F Bib taps, long body cast copper alloy, chromium plated, fancy type, screwed down, with crutch or butterfly handle, screwed for 15 mm bore of iron pipe or for brass ferrule fixed as in repairs/replacement complete all as specified and as directed.

S&F Angle valve cast copper alloy, chromium plated, fancy type,screwed down, with crutch or butterfly handle, screwed for 15 mm bore of iron pipe or for brass ferrule fixed as in repairs/replacement complete all as specified and as directed.

S&F Brass CP basin mixer for mixing hot & cold water screwed down for 15mm bore of iron pipe fixed as in repairs/replacement complete all as specified and as directed.

S&F Stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (Concealed type), screwed down, with crutch or butterfly handle, screwed for 15 mm bore of iron pipe or for brass ferrule fixed as in repairs/replacement complete all as specified and as directed.

S&F PVC waste pipe 32 mm dia bore of approved make suitable for Urinal/WHB fixed as in repairs/replacement complete all as specified and as directed.

S&F Brass chromium plated shower rose 125mm size, with Arm swivel joints, including fixing to steel pipe or union fixed as in repairs/replacement complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm fixed as in repairs/replacement complete all as specified and as directed.

S&F Vitreous China Counter Top (Self Rimming) wash hand basin, White in colour of size 630mm x 500mm including circular cutting and tucked in granite slab with and including Cast Copper alloy chromium plated fancy type single lever Basin Mixer fixed to 15mm bore of iron pipe, 32mm dia Brass CP waste fitting and connection to waste pipe fixed as in repairs/replacement complete all as specified and as directed.

S&F Vitreous China Squatting Pan, `Orrisa' pattern, size 580 x440 mm White, with integral foot rests (excluding flushing cistern and flush pipe but including CI P/S trap) set and jointed including embedding in concrete as in repairs/replacement complete all as specified and as directed.

S&F Vitreous China Wash down water closet (Pedestal Pattern), Snow White in Colour of size 570x460x380mm with and including Plastic Seat Cover of same colour closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device fixed as in repairs/replacement complete all as specified and as directed.

S&F PVC valve less, syphonic action type, flushing cistern 10 Ltr capacity, low level, White, with inlet, ball valve, float and handle including brackets, low level flushing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any and fixed as in repairs/replacement complete all as specified and as directed.

S&F Vitreous China Urinal, half stall type, flat back, White, complete including providing and fixing plugs, bedding urinal against wall in cement mortar [1:2], securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, including CI Brackets, grating and union for discharge pipe, CP Urinal spreader, CP screws etc fixed as in repairs/replacement complete all as specified and as directed.

S&F Grating doom 125 mm dia of PTMT (Minimum weight 40 gms) fixed as in repairs/replacement complete all as specified and as directed.

S&F High density polyethylene pipes (HDPE) 40 mm bore of pressure rating 6 Kgf/Sqcm, fixed to walls, ceiling or in floors etc with necessary fittings such socket, L Bends, Tee, Reducer etc complete all as specified and as directed.

S&F Stainless Steel Peg Set of 6 Pegs, 45 centimetre long of approved make fixed as in repairs/replacement complete all as specified and as directed.

S&F Shelf of PTMT fixed with and including chromium plated brass screws and wooden /plastic cleats (Min wt 300gms) complete all as specified and as directed.

S&F Brass Chromium Plated Tubular Towel Rail, 20mm dia, D Type, 600 mm long between flanges fixed as in repairs/replacement complete all as specified and as directed.

S&F Health faucet (ABS Body) stainless steel chromium plated suitable for 15 mm dia bore of pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position as in repairs/replacement complete all as specified and as directed.

Demolition of cement concrete of any description and in any position, removing debris out side the MOD land to a designated place earmarked by the by local administration complete all as specified and as directed.

M&L for 50 mm thick PCC 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection/pavings and shafts etc including making joints at 3.00 metre intervals and at each corner, the joints shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation etc or for soft, wells, cesspits, manholes, pier hoes, etc n.exc 10 sqm on plan and n.exc 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and exc 1.5m but n.exc 3.0m in depth for foundations etc or plinth beam etc n.exc 10 Sqm on plan and exc 1.5m but n.exc 3.0m in depth and getting out in soft/loose soil complete all as specified and directed.

Excavation over areas n.exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation over areas exc 1.5 m but n.exc 3.0 m deep and getting out in soft/loose soil complete all as specified and as directed.

Demolition and breaking up drain pipes 150/200mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.

M&L for Plain Cement Concrete 1:3:6 Type C2 using 40mm graded stone aggregate, bed to drain pipes of 150mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

M&L for Plain Cement Concrete 1:3:6 Type C2 using 40mm graded stone aggregate, bed to drain pipes of 200mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

M&L for Reinforced concrete pipes, Class NP2, 200mm bore of pipe with one collar per length of pipe laid, jointed and tested after they are laid complete all as specified and as directed.

M&L for Reinforced concrete pipes, Class NP2, 150mm bore of pipe with one collar per length of pipe laid, jointed and tested after they are laid complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layer n.exc 25cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated surplus soil n.exc 50mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed.

M&L for PCC 1:4:8, Type D2 using 40mm graded stone aggregate as in fdn, filling and mass concrete complete all as specified and as directed.

M&L for Cast iron floor trap, 75mm dia of outlet with grating including jointing to waste pipe and fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as in repairs/replacement complete all as specified and as directed.

M&L for Cast iron floor trap, 100mm dia of outlet with grating including jointing to waste pipe and fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as in repairs/replacement complete all as specified and as directed.

S&F 100 mm bore Cast iron (sand cast) soil, waste and vent pipes with or without ears in any length with cement joints, laid in trenches or in floors with and including dismantling of existing pipes or connections complete all as specified and as directed.

S&F 75 mm bore Cast iron (sand cast) soil, waste and vent pipes with or without ears in any length with cement joints, laid in trenches or in floors with and including dismantling of existing pipes or connections complete all as specified and as directed.

S&F 100 mm bore Cast iron (sand cast) soil, waste and vent pipes with or without ears in any length with cement joints, fixed to walls with and including dismantling of existing pipes or connections complete all as specified and as directed.

S&F 75 mm bore Cast iron (sand cast) soil, waste and vent pipes with or without ears in any length with cement joints, fixed to walls with and including dismantling of existing pipes or connections complete all as specified and as directed.

S&F Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door 75mm bore of pipe as in repair/replacement complete all as specified and as directed.

S&F Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) with duck's foot or heel rest 100 mm bore of pipe as in repair/replacement complete all as specified and as directed.

S&F Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) with duck's foot or heel rest 75mm bore of pipe as in repair/replacement complete all as specified and as directed.

S&F Cast iron Branch pieces, single, T- equal or unequal, ordinary or inverted with spigot or socket type or with parallel branches with oval access door, 100 mm bore of pipe as in repair/replacement complete all as specified and as directed.

S&F Cast iron Branch pieces, single, T- equal or unequal, ordinary or inverted with spigot or socket type or with parallel branches with oval access door, 75 mm bore of pipe as in repair/replacement complete all as specified and as directed.

S&F Cast iron cowls 100mm bore of pipe as in repair/replacement complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes of pressure rating 6 Kgf/Sqcm, single socketed in any length with rubber ring joints fixed to wall and making good the mouth of rain water pipe with and including taking down old existing pipes (any size or pattern) with all fittings complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes of pressure rating 6 Kgf/Sqcm, single socketed in any length with rubber ring joints laid in trenches/floor and making good the mouth of rain water pipe with and including taking down old existing pipes (any size or pattern) with all fittings complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends any radius, fixed with solvent cement in any position as per site requirement complete all as specified and as directed.

S&F Stack Clamps for 110mm bore of pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

Disconnecting existing water tanks of capacity exceeding 250 litres but not exceeding 500 litres, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting, if required, reconnecting and refixing in position complete all as specified and as directed.

Disconnecting existing water tanks of capacity exceeding 500 litres but not exceeding 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting, if required, reconnecting and refixing in position complete all as specified and as directed.

Dismantling water tanks of capacity exceeding 250litres but not exceeding 500 litres complete all as specified and as directed.

Dismantling water tanks of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks, Double Layered of 500 litres capacity (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks, Double Layered of 1000 litres capacity (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. complete all as specified and as directed.

S&F Ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, ISI marked (Minimum weight 210 gms), screwed & suitable for iron pipe 20 mm bore fixed as in repairs/replacement complete all as specified and as directed.

S&F Gun metal, globe or gate valve, with iron wheel head screwed both ends for iron pipe 20mm bore fixed as in repairs/replacement complete all as specified and as directed.

M&L for First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick, joint free (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18Sqm, laid in floors over and including 15 mm thick screed bed in cement mortar (1:6), set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and as directed.

M&L for first quality glazed ceramic tiles coloured of size 450mmx300mmx7mm thick (designer pattern) fixed in pattern to wall (combination of dark & light colour with border) as in skirting, dado, over and including 10 mm thick rendering in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and as directed.

M&L for First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick, joint free (square/ rectangular) area of each tile exceeding 0.18Sqm but not exceeding 0.38Sqm, laid in floors over and including 15 mm thick screed bed in cement mortar (1:6), set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and as directed.

All as per item No 129 here-in-before but as in dado/skirting over and including 10mm thick rendering in CM 1:4, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and as directed.

Demolition of Reinforcement cement concrete of any description and in any position not otherwise specially provided for as in isolated wall/windows, chhaja, facia, Balconies, precast cover slab etc (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in cement mortar complete all as specified and as directed

M&L for Machine cut Pre polished Kota stone slab flooring 18-20 mm thick over and including 15mm thick screed in CM (1:6) laid and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Machine cut Pre polished Kota stone slab 18-20 mm thick as in riser of steps, skirting, dado and pillar etc laid over and including 10mm thick rendering in CM (1:4), set and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Machine cut Marble tiles 18-20mm thick (Makrana White), bedded over 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of tiles including grinding, moulding and polishing complete all as specified and as directed.

M&L for Machine cut Marble tiles 18-20mm thick (Makrana White), as in riser of steps, skirting, dado and pillar etc laid over and including 10mm thick rendering in CM (1:4), set and jointed with grey cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete all as specified and as directed.

M&L for Machine cut Granite tiles16-18mm thick (of any type), bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Machine cut Granite tiles16-18mm thick (of any type), as in riser of steps, skirting, dado and pillar etc laid over and including 10mm thick rendering in CM (1:4), set and jointed with grey cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete all as specified and as directed.

M&L for Rounding to edges of stone slabs (one edge) 16 to 18/18 to 20mm thick as in steps, jambs, pillars, cooking platforms and the likes including rubbing and polishing complete all as specified and as directed.

M&L for RCC (1:1.5:3) type A-1(using 20mm graded stone aggregate) as in chajjas, fins, louvers, roof projections, beam and lintels etc after removing/taking down of loose concrete and preparation of roof surfaces by application of Anti corrosion primer such as Dr fixit rust remover or equivalent with and including welding additional main bars/distribution bars if found necessary by inserting into adequate depth in beam by drilling, pinning reinforcement old bars/new bars including necessary sacaffolding and form work as required upto the height of 3.5 mtr complete all as specified and as directed. Note:- (a) Rates quoted against the item shall deemed to be included for necessary scaffolding etc. (b) Reinforcement, Anti corrosion primer/Chemical shall be measured and paid seprately.

M&L for RCC (1:1.5:3) type A-1(using 20mm graded stone aggregate) as in chajjas, fins, louvers, roof projections, beam and lintels etc after removing/taking down of loose concrete and preparation of roof surfaces by application of Anti corrosion primer such as Dr fixit rust remover or equivalent with and including welding additional main bars/distribution bars if found necessary by inserting into adequate depth in beam by drilling, pinning reinforcement old bars/new bars including necessary sacaffolding and form work as required exceeding 3.5mtr and upto the height of 7.5mtr complete all as specified and as directed. Note:- (a) Rates quoted against the item shall deemed to be included for necessary scaffolding etc. (b) Reinforcement, Anti corrosion primer/Chemical shall be measured and paid seprately.

Supply only Nitozinc anti corrosion primer of M/S FOSROC or equivalent make as approved by the GE complete all as specified and as directed.

Demolition of cement concrete (Reinforced), of any description & in any position (below or above ground level), any thickness and any length, (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M&L for reinforced cement concrete (1:1.5:3), type A-1, (using 20 mm graded crushed stone aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for TMT Mild steel bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders and including mild steel wire (annealed) not less than 0.9mm dia etc complete all as specified and directed.

M&L for form work to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams: and similar works; vertical or to batter for flat rough finished surfaces complete all as specified and directed.

M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions size of square, rectangular or polygonal for flat rough finished surfaces complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc for flat rough finished surfaces complete all as specified and directed.

M&L for use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) fair finished surface of concrete complete all as specified and as directed.

M&L for form work to edges of concrete flats, treads breaks in floors , window cills , concrete railing, opening in concrete walls, floors and roofs RCC/PCC bands floors roofs n exc 20 cm wide and sides of RCC/PCC bands in walls , horizontal or sloping and similar work exc 10 cm and not exc 20 cm wide surface finished rough complete all as specified and directed.

Dismantling boarding of any description fixed in any position with nails complete all as specified and as directed.

M&L for 18 mm/19 mm thick pre laminated board grade BWR with decorative type laminate 0.9mm thick type-I of surface finish (colour as approved by the GE) on both sides fixed with approved adhesive as per manufacturer's instructions and fixed with screws to timber frame as in cupboards shutter, shelves, pelmets etc with and including 6mm beading of 1st class HW (teak) all around complete all as specified and as directed.

Dismantling timber framed work as in fillets, rails, posts, rafters, purlins etc., under 40 Sq. Cm in section complete all as specified and as directed.

S&F 2nd class hard wood plain fillets, square, rectangular or triangular in section of sectional area exc 13 & n. exc 25 sqcm, wrought finished secured with screws complete all as specified and as directed.

S&F Continuous (piano) hinges, stainless steel, bright finish or electro galvanised 30 mm wide flap (when open) complete all as specified and as directed.

S&F 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F 100mm size aluminum handle, 'D' type extruded aluminum alloy anodized, fabricated type complete all as specified and as directed.

S&F magnet catcher suitable for kitchen cabinet/cupboard with steel plate as required complete all as specified and as directed.

S&F 100 mm size aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

M&L for cutting holes in brick walls exc half brick but n exc full brick in cement mortar for inserting holdfasts and making good dismantled/disturbed portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-0 as required complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:3 mixed with integral water proofing compound for repair of distressed RCC member including scaffolding for suitable working platform as in column, beams, chajja and roof projection, facia etc by using chicken wire mess, finishing the surfaces even and fair without using extra cement with and including taking down existing disintegrated and loose plaster complete all as specified and as directed. Note : (i) Rendering shall be done in two layers. First Layer 10mm thick and Second layer 5 mm thick over and including wire netting of galvanised mild steel wires of 0.91mm dia and average size of wire mess 20mm fixed with tinned tacks. (ii) Removing all disintegrated and loose plaster and cleaning the rust from exposed reinforcement, removing rusted scales by chipping and cleaning by wire brushes. (iii) Water proofing compound shall be measured and paid separately

M&L for Raking out joints/pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs, built in cement plaster etc complete all as specified and as directed.

M&L for Flush pointing to brick walls in cement mortar 1:3 complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1, using 20 mm graded mechanically crushed stone aggregates as in padding to sunken floor, covering to junction of floor and vertical walls including chamfering on edges complete all as specified and as directed.

M&L for RCC M-25 design mix as in foundation, including rafts , footings , foundation beams, plinth beams; bases for columns, etc ; basement slabs, under- reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-25 design mix as in columns, pillars, piers, posts and struts etc complete all as specified and directed.

M&L for RCC M-25 design mix as in beams , cantilevers, bressummers, lintels over 1.5 m span etc complete all as specified and directed.

M&L for RCC M-25 design mix as in slabs supported on walls, beams and columns in floors , roofs, landings , balconies, canopies, deck slabs and shelves etc complete all as specified and directed.

M&L for coloured vitrified ceramic tiles 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick screed bed in CM 1:4 over 25 mm thick PCC 1:2:4 Type B1 over sub base 100 mm thick in PCC 1:4:8 Type D2 complete all as specified and directed.

Labour only for earth filling under floor or in foundation including watering and consolidation complete all as specified and directed.

M&L for treating the back fill in contact with foundation @ 7.5 litre of emulsion per square metre of vertical surface area, complete all as specified and directed.

M&L for treating the top surface of filled earth @ 5 litre of emulsion per square metre of surface area, complete all as specified and directed.

M&L for hard core of gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface with broken stone aggregate complete all as specified and directed.

M&L for coloured vitrified ceramic tiles 10 mm thick (Square/rectangular) in vertical surfaces, such as skirting, dados and riser to steps etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for 100 mm thick plain cement concrete 1:4:8, type D2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for providing and laying 60mm thick Factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footh path, parks, lawns, drive ways or light traffic parking etc of required strength, thickness and shape/size, made by vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

ELECRIFICATION WORK

Taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete all as specified and as directed.

M&L for Point wiring with 1.5 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn in existing concealed conduits incuding provision of 1.5 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including MS sunken box or pressed steel terminal boxes made out of MS sheet of thickness not less than 1.2mm with provision of new 3 mm thick plastic laminated sheet top cover over sunken box for housing the switches, socket outlets, fan regulators etc. with brass screws and brass washers with and including making good the disturbed surfaces as per existing for one light/fan point controlled by one switch complete all as per specified and as directed.

All as per item No 181 here-in-before but for one socket outlet point 5 Amps on same board.

All as per item No 181 here-in-before but for one socket outlet point 5 Amps on independent board.

All as per item No 181 here-in-before but with 2.5 sqmm cable for 3 pin 15 amps switch socket outlet (Power point).

S&F switch piano 6 Amps flush type single pole one way 230 volt , AC supply complete all as specified and as directed.

S&F switch piano 16 Amps flush type single pole one way 230 volt , AC supply, complete all as specified and as directed.

S&F socket outlet 3 pin 6 amps 230 volt AC flush type specified, complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 pin 6/16 amps 230 volt. flush type, complete all as specified and as directed.

S&F fan regulator electronic step type , 250 volts, AC supply suitable for ceiling fan of any type/make/sweep complete all as specified and as directed.

M&L for Sub main wiring with two single core 4 sqmm (nominal area) stranded copper conductor FRLSH PVC insulated and unsheathed cable drawn in existing concealed conduits including one run of continuous PVC insulated stranded copper conductor FRLSH cable 4 sqmm (nominal area) for earth continuity complete all as specified and as directed. Note :- 2 runs of 4sqmm copper conductor phase and neutral and one run of same size earth wire & making good shall be measured as one unit length)

M&L for Sub main wiring with two single core 6 sqmm (nominal area) stranded copper conductor FRLSH PVC insulated and unsheathed cable drawn inexisting concealed conduits including one run of continuous PVC insulated stranded copper conductor FRLSH cable 6 sqmm (nominal area) for earth continuity complete all as specified and as directed. Note :- 2 runs of 6sqmm copper conductor phase and neutral and one run of same size earth wire & making good shall be measured as one unit length)

S&F ceiling roses 3 phase/PVC/polycarbonate, isolated body complete all as specified and as directed.

S&F LED lights fitting 4 feet long 1x 20W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F LED light fitting mirror type with high output diffuser 2 feet long 1X10W 220V AC decorative with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

S&F 40mm dia medium grade Galvanised Iron brackets 1.20m long bent to shape with 2 Nos Flat Iron clamps duly grouted /anchored in wall with and including grouting material as required complete all as specified and as directed.

S&F MCCB FP 125 Amps 415 volts, breaking capacity 25KA with adjustable thermal & magnetic settings ISI marked complete all as specified and as directed.

S&F Industrial exhaust fan of sweep 300mm, metallic body with louvers shutter, voltage 230V, 50 Hz, single phase, Min. 1400 RPM, Copper wound, heavy duty with double ball bearings, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose with and including cutting round shaped opening of suitable size in brick walls fixed with 4 Nos anchor bolts/nuts and making good the disturbed surface complete all as specified and as directed.

S&F MCB single pole 240 volts, 50Hz , breaking capacity 10KA, B curve 6A to 32A, ISI marked all as specified and as directed.

S&F MCB SPN 240 volts, 50Hz , breaking capacity 10KA, B curve 6A to 32A, ISI marked all as specified and as directed.

S&F MCB FP 415 volts, 50Hz , breaking capacity 10KA, B curve 40 Amps to 63 Amps ISI marked complete all as specified and as directed.

S&F factory made sheet metal enclosures suitable for MCCB as incoming VTPN 415V and MCBs double door, 4 ways with 200 Amps bus bar flush mounted with IP-43 protection and making connections with suitable size of lugs complete all as specified and as directed. Note: MCCB/MCBs shall be measured and paid seprately.

S&F factory made sheet metal enclosures distribution board SPN 8 ways double door , IP 43 protection, 240 volts, with shrouded neutral bar & insulated bus bar and earth link, suitable for MCBs as incomer and out going complete dully grouted on the wall (flush) and making connections with suitable size of lugs and making good the disturbed surface to match existing surface all as specified and as directed.

All as per item No 203 here-in-before but distribution board SPN 12 ways double door

M&L for earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick buried directly in ground vertically (depth of pit not less than 2.25 m below normal ground level), with top edge of earth plate not less than 1.5 m below normal ground level, earth plate surrounded from all sides by 15cm thick packed alternate layers of charcoal dust and common salt, electrode connections using galvanized lead wire 4mm dia (upto body of equipment) by means of nuts, bolts, check nuts & GI washers, connected to main switch board or main control board or test point, protected by galvanized iron pipe light grade 15mm dia bore, and watering pipe 20 mm bore GI light grade pipe with funnel & wire mesh, including all necessary excavation & earth work, PCC chamber in PCC (1:2:4) type B-1 & RCC cover, all as shown in electrical plate No 3 of MES Schedule Part-I (2009), testing on completion complete all as specified and directed. Note(s) :- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with XPM not less than 4Kg/Sqm. (ii) PCC chamber shall be constructed 500 mm away from the edge of earth pit. (iii) Rate shall include GI lead wire and protection pipe of length 7.5m, GI pipe beyond 7.5m length required at site shall be measured and paid separately. (iv) Earth resistance should be less than 3 Ohm. In case the test results are not found below 3 Ohm, complete earthing will be redone without any extra cost to Govt.

All as per description of item No 205 here-in-before but with and including taking out old earthing materials complete all as specified and directed.

All as per description of item No 205 here-in-before but using galvanised iron strip 25x4mm as earth lead protected by galvanized iron pipe light grade 32mm dia bore complete all as specified and directed.

M&L for Sub main wiring with two single core 10 sqmm (nominal area) stranded copper conductor FRLSH PVC insulated and unsheathed cable drawn in existing concealed conduits including one run of continuous PVC insulated stranded copper conductor FRLSH cable 10 sqmm (nominal area) for earth continuity, including taking out and removal of old sub main wiring complete all as specified and as directed. Note :- 2 runs of 10sqmm copper conductor phase and neutral and one run of same size earth wire & making good shall be measured as one unit length)

Disconnecting & taking out defective underground cable any size and any type from trenches, pole, pipe, floor and wall etc complete all as specified and as directed.

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated and armoured, heavy duty, electric power cable, cross sectional area 50 Sqmm 3.5 core aluminum conductor 1100volts grade under ground cable including both side connection with cable lugs etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc complete all as specified and as directed. Note: Excavation, Returning filling & removal of earth, sand cushioning and bricks for protection of cable shall be measured and paid separtely.

All as per Item No 210 here-in-before but power cable of cross sectional area 35 Sqmm 3.5 core complete all as specified and as directed.

All as per Item No 210 here-in-before but power cable of cross sectional area 120 Sqmm 3.5 core complete all as specified and as directed.

All as per Item No 210 here-in-before but power cable of cross sectional area 95 Sqmm 3.5 core complete all as specified and as directed.

M&L for sand cushioning with a layer of dry river sand and punning to provide required cover as per SSR part -I complete all as specified and as directed. Note : Punned down thickness (overall 18cm) shall be considered for measurement and payment.

Supply & laying old size sub class B bricks laid flat and dry perpendicular to the direction of cable adjacent to each other over the cable for protection complete all as specified and as directed.

M&L for non metallic PVC conduit concealed in wall exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc of 25mm dia with and including making good the disturbed surface complete all as specified and as directed.

S&F factory made sheet metal enclosures two pin and earth plug & socket with metallic top and MCB SP 32 Amps 240 volts and making connections with suitable size of lugs complete all as specified and as directed.

S&F MCB single pole 240 volts, 50Hz , 63 Amps C curve ISI marked complete all as specified and as directed.

Taking down old UNSV switches/sockets/fan regulators/ceiling roses/holders etc of any type and size complete all as specified and as directed.

Taking down old UNSV light fittings of any type and size complete all as specified and as directed.

Taking down old UNSV DBS with cutouts/MCBs etc of any type and size complete all as specified and as directed.

Taking down carefully submain wiring/service connections etc and making good distrubed surfaces complete all as specified and as directed.

Disconnecting and taking down the existing ceiling fan of 1200/1400 mm sweep of any make and depositing in MES store yard complete all as specified and as directed.

M&L for preparation/Cleaning properly surface of ceiling fans and applying one coat of superior quality synthetic enamelled paint white with spray gun with and incl writing MES No, servicing/oiling/greasing for proper working, refixing at original position, making electrical connections and testing complete all as specified and as directed. Note: Serviceable Ceiling fans taken down against item No 222 here-in-before shall be reused/refixed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessores, 230V, 1400mm sweep, Min air delivery 210 CGM with service value 6.00 (BEE) Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

All as per Item No 226 here-in-before but 1200mm sweep complete all as specified and as directed.

S&F Outdoor type enclosures fabricated from 3.15 mm thick CRCA sheet duly powder coated floor mounted double door type with 04 nos legs made of 40x40x5 mm thick angle iron with and incl 160 amp MCCB four pole 25 KA complete all as specified and as directed.

M&L for Point wiring with 1.5 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn in and including non metallic rigid PVC concealed conduits with all standard fittings ie Tee junction, bends incuding new sunken terminal boxes duly epoxy painted for mounting modular switches/sockets etc with inner/outer plates and 1.5 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, for one light/fan point controlled by one switch complete all as per specified and as directed.

All as per item No 229 here-in-before but for one socket outlet point three pin multipurpose 5 Amps on independent board.

All as per item No 229 here-in-before but for one socket outlet point three pin multipurpose 5 Amps on same board.

S&F Modular switch 6 Amps one way 230 volts 1 module complete all as specified and as directed.

S&F Modular socket outlet 2/3 pin 6 Amps one way 230 volts 2 modules complete all as specified and as directed.

S&F modular Type fan regulator 120W 2 modules suitable for ceiling fan of any type/make/sweep complete all as specified and as directed.

M&L for Sub main wiring with two single core 4 sqmm (nominal area) stranded copper conductor FRLSH PVC insulated and unsheathed cable drawn in and including 20mm dia or higher size non metallic rigid PVC concealed conduits with all standard fittings ie Tee junction, bends etc ISI marked including one run of continuous PVC insulated stranded copper conductor FRLSH cable 4 sqmm (nominal area) for earth continuity complete all as specified and as directed. Note :- 2 runs of 4sqmm copper conductor phase and neutral and one run of same size earth wire including one run of PVC conduit with cutting chasing & making good shall be measured as one unit length.

M&L for Sub main wiring with two single core 10 sqmm (nominal area) stranded copper conductor FRLSH PVC insulated and unsheathed cable drawn in and including 20mm dia or higher size non metallic rigid PVC concealed conduits with all standard fittings ie Tee junction, bends etc ISI marked including one run of continuous PVC insulated stranded copper conductor FRLSH cable 10 sqmm (nominal area) for earth continuity complete all as specified and as directed. Note :- 2 runs of 10sqmm copper conductor phase and neutral and one run of same size earth wire including one run of PVC conduit with cutting chasing & making good shall be measured as one unit length.

Note: The Total amount shall subject to adjustment of credit of Rs. 61192 for old Materials as per Schedule of Credit.

Anil Kumar Gupta (BID ID -3153235)