Bid Documents for Construction Work of Public Toilet Block Near Dhangadhra Darwaja, at.Halvad Nagarpalika, under SJMMSVY (UDP-88) (Year 2023-24) Saving Grant, Dist:- Morbi

Sr. No. Description Estimated Cost Tender Cost

Construction Work of Public Toilet Block Near Dhangadhra Darwaja,

I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and

words) of the estimated rate mentioned above. Amount of my/our tender works out as under Estimated

amount put to tender Estimated amount put to tender Deduct………% below Add………% Above

In words In words………………….

The 18% GST will be Paid Separately for the tender rate shown in the Schedule B

The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer‐In‐ Charge for which no extra payment shall be made.

The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

GST and Income tax TDS will be deducted at a source while making payments of bills

Signature of Contractor Signature of Chief Officer

HALVAD NAGARPALIKA, HALVAD

Halvad Nagarpalika, Halvad

Name of Project :- Bid Documents for Construction Work of Public Toilet Block Near Dhangadhra Darwaja,

at.Halvad Nagarpalika, under SJMMSVY (UDP-88) (Year 2023-24) Saving Grant, Dist:- Morbi

Item Qty. Rate Per Amount

Excavation for foundation upto 1.5m depth including sorting out

and stacking of useful materials and disposing off the excavated

stuff upto 50 Meter lead. (A) Loose or soft soil

Providing and laying cement concrete 1:4:8 (1-Cement : 4 coarse

sand : 8-hand broken stone aggregates 40mm nominal size) and

curing complete excluding cost of formwork in (A) Foundation and

Providing and laying controlled cement concrete M.250 and curing

complete excluding the cost of formwork and reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of

columns and Mass concrete.

Providing and laying controlled cement concrete M.250 and curing

complete excluding the cost of formwork and reinforce ment for

reinforced concrete work in (D) Columns, Pillars posts and struts, 5.00 4761.83 Cmt.

upto floor two level.

Providing and laying controlled cement concrete M.250 and curing

complete excluding the cost of formwork and reinforcement for

reinforced concrete work in (C) Slabs, landing, shelves, Balconies, 5.00 4656.42 Cmt.

Lintels, Beams, Girders and Cantilever upto floor two level.

Providing and laying cement concrete 1:3:6 (1- Cement : 3Coarse

sand : 6- crushed stone aggregates 20 mm nominal size) and

curing complete including cost of formwork in (A) Wall Caps /

Providing and laying ordinary cement concrete 1:2:4 (1 Cement 2-

coarse sand : 4- graded stone aggregates 20 mm nominal size) for

R.C.C lintel including finishing smooth with, curing etc. complete 1.00 10218.98 Cmt.

including the cost of formwork but excluding the cost of

Providing and Laying controlled cement concrete M.150 and

finishing smooth with curing etc. complete including the cost of

formwork but excluding the cost of reinforsement for R.C.C work in 3.00 6771.96 Cmt.

(iii) Slabs having more than 10 cm and upto 13 cm. Thickness

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm. in

depth consolidating each disposited layer by ramming and

HALVAD NAGARPALIKA, HALVAD

Providing formwork of ordinary timber planking so as to give a

rough finish including centering shuttering strutting and propping

etc. Height of propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the same for in situ 48.00 180.40 Smt.

reinforced concrete and plain concrete work in. (A) Foundations

Footings Bases of Columns etc. and Mass concrete.

Providing formwork of ordinary timber planking so as to give a

rough finish including centering shuttering strutting and propping

etc. height of propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the same for in situ 37.00 315.69 Smt.

reinforced concrete and plain concrete work in. (G) Columns

PillarsPosts and struts. (1) Square Rectangular Polygonal in plan.

Providing formwork of ordinary timber planking so as to give a

rough finish including centering shuttering strutting and propping

etc. Height of propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the same for in situ 20.00 263.90 Smt.

reinforced concrete and plain concrete work in. (B) Flat surfaces

such as soffits of supspened floors slabs Landings and the like. (1)

Floors etc. upto 200 mm in thickness.

Providing formwork of ordinary timber planking so as to give a

rough finish including centering shuttering strutting and propping

etc. height of propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the same for in situ 20.00 205.45 Smt.

reinforced concrete and plain concrete work in. (H) (1) Sides and

soffits of Beams Beam Haunchings cantilevers Girders Bressumers

and Lintels not exceeding 1 M. in Depth.

Providing and laying cement concrete 1:2:4 (1-Cement : 2 Coarse

sand : 4-graded stone aggregates 20 mm nominal size) for

reinforced concrete Chhajjas not exceeding 10cm. thickness upto

floor two level including finishing the exposed surfaces with cement 1.00 6672.74 Cmt.

mortar 1:3 (1-cement, 3 Fine sand) to give a smooth and even

surface centering and formwork and curing complete excluding cost

of reinforcement.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two 1885.00 77.29 Kg.

Coursed rubble masonry with hard stone of approved quality in

foundations and plinth in Cement Mortar 1:6 (1Cement : 6-coarse 4.00 3476.26 Cmt.

sand) etc. complete.

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B) Conventional

Extra for brick work in superstructure above plinth level upto floor

two level (B) Conventional

HALVAD NAGARPALIKA, HALVAD

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B) Conventional

Extra for brick work in superstructure above plinth level upto floor

two level (B) Conventional

Extra for brick work in superstructure above floor two level Item

No. 1(6.12) (B) Conventional

(i) Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar

1:4 (1-Cement : 4-coarse sand) in foundation and plinth (B)

Extra for half brick masonry in superstructure above plinth level

upto floor two level. (B) Conventional

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (iii) Cement mortar 1:6 (1-cement:6-

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (ii) Cement mortar

1:4 (1-cement :4-sand)

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (ii) Cement mortar

1:4 (1-cement :4-sand)

Extra over items 1 to 69, 71 to 87 and 90 for interior plastering

above floor two level for every additional storey height. (1) Single 22.00 185.09 Smt.

20mm thick sand faced cement plaster on walls upto height

metres above ground level consisting of 12mm thick backing coat

of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of 97.00 315.69 Smt.

C.M. 1:1 (1-cement : 1-sand) etc.complete.

Applying two coats of putty & two coats of primer of approved

brand and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar 147.00 40.59 Smt.

dropping and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of 97.00 120.26 Smt.

loose powdered materials.etc complete

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

even shade including throughly brushing the surface free from 147.00 84.37 Smt.

mortar droppings and other foreign matter and sand papered

HALVAD NAGARPALIKA, HALVAD

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 (1 cement: 6 coarse sand) on

new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color 17.00 1467.72 Smt.

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for antiskit

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color 9.00 1467.72 Smt.

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for antiskit

Providing and fixing one side polish 18mm thick granite stone for

partition in urinal area

Providing and laying Vitrified tiles 8 to 10 mm thick, 24'' x 24'' in

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand) finishing with flush

pointing in white cement.

Providing and laying white glazed tiles 6mm thick in skrting risers

of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white cement slurry

Providing and fixing standared extruded of alluminium section of

size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour

anodized alluminium frame for ventilation with 5 mm thick frosted 3.00 1175.56 Smt.

glass as details etc complete for Ventilation

Provoding and fixing flush door shutters, solid core construction

with frame of first class hardwood with cross board and face veneer

or plywood face panels, including anodised alluminium butt hinges

with necessary screws. (B) Non-decorative type and block board 7.00 1829.74 Smt.

core anodised alluminium butt hinges in flush door shutters (2)

Point wiring for Light/Fan/Bell/Primary point with 2-1.5 sq.mm. &

earth wire of 1.5 sq.mm. (Green) both are of ISI marked 1.1kv

grade FRLS PVC insulated multi strand copper wires upto max

length of 10 mt., in below type of pipe erected with 6A TISSINO

Type ISI marked flush type switch/bell push and accessories

erected on metal/PVC/Wooden Box covered with 3mm thick PC

(Poly carbonate)/Acrylic/Laminated Sheet, with necessary Lamp

holder/ceiling rose/HD connector as directed.

(a) with medium class rigid PVC pipe and accessories erected

flushed on wall/ceiling complete. 10.00 354.51 Point

HALVAD NAGARPALIKA, HALVAD

Providing laying and jointing in true line and level 32mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be 10.00 119.15 Rmt.

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be 20.00 91.84 Rmt.

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be 50.00 72.65 Rmt.

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing and fixing ball cock of approved. quality as directed. (B)

Abonite (ii) 50mm dia. 1.00 137.89 Each

Providing and fixing Urinal of Jaguar make (Model No.69109000)

URS-WHT-13253N with auto closing concealed urinal flush valve

(Model No.: PRS-CHR-073, model No. 84818020) as per direction 8.00 13228.98 Each

of Engineer in Charge.

Providing and fixing metropole flush valve regular 40mm size

(Model No.FLV-CHR-1093N)

Providing and fixing Gun metal check or non-return fullway wheel

valve.(D) 32mm dia.

Providing and fixing of florentine prime pillar cock with extend

(Model No.FLP-CHR-5031PM)

Providing and fixing 2 way bib cock with wall flange (Model No.FLP-

Providing and fixing 600mm x 450mm bevelled edge mirrror of

superior glass mounted on 6mm thick A.C. sheet or plywood sheet

and fixing to wooden pluge with C.P. brass screws and washers.

Providing and fixing 100mm sand cast iron grating for gully, floor

Providing and fixing M.I. fisher union for washbasin or sink. (A)

Providing and fixing C.P. brass waste for washbasin or sink. (A)

HALVAD NAGARPALIKA, HALVAD

Providing and fixing wall hung basin with fixing accessories 3.00 15255.04 Each

Providing and fixing water closet squatting Pan (Indian type W.C.

Pan) size 580mm (Earthwork, bed concrete, foot reste and trap to

be measured and paid for separately) (A) Vitreous China.(I) Long 2.00 987.14 Each

pattern = White colour

Providing and fixing in position cowel went to pipes.(C) 100mm dia

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2

working pressure poluthene pipes of the following outside Dia. Low

densidy, complete with special falnge compression type fittings, 20.00 339.05 Rmt.

wall clipsetc. including making good the wall ceiling and

floor.(G)110 mm

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including 5.00 586.27 Each

the cost of cutting and making good the walls.

Providing and laying (to level or slopes) and jointing with stiff

mixture of Cement Mortar in proportion 1:1 Salt glazed stoneware

pipes including testing of pipes and joints complete. (B) 150mm

Providing and laying Cement concrete 1:5:10 (1-Cement : 5Fine

sand :10-Graded stone aggregate 40mm nominal size) bedding for

stoneware pipes of following internal dia meters with necessary 30.00 213.71 Rmt.

formwork and curing complete.(B) 150mm dia. (166mm Ave. bed

Extra over item 24.1 for providing salt Glazed stoneware fittings.(i)

Bends of required degree (any redious) of following nominal 5.00 58.97 Each

diameters.(B) 150mm dia.

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm

size (inside) with standard weight.(i) Square mouth traps. (B)

150mm x 100mm size P or R type

Providing laying (to level or slopes) and jointing reinforced concrete

Light duty non-pressure pipes I.S. class NP2 of the following

internal diameter with collars and butt ends prepared for collar 30.00 678.02 Rmt.

joints including testing of joints complete. (D) 300mm

HALVAD NAGARPALIKA, HALVAD

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1cement

:2-coarse sand : 4-graded stone aggregate 20mm nominal size)

foundation concrete 1:3:6 mix (1-cement : 3 coarse sand :6-Brick

bats 40 + 50mm size) inside plastering 15mm thick with Cement

Mortar 1:3 (1-Cement : 3-coarse sand) finished with a floating coat

of neat cement and making channels in cement concrete 1:2:4 mix

(1-Cement :2Coarse sand :4-stone aggregate 20mm nominal size)

finished smooth complete including curing and festing (i) Inside 2.00 19349.63 Each

size 900mm x 1200mm and 1.5M. deep including C.I. cover with

frame size 560mm diameter total weight of cover and frame to be

not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame

Kg.)(A) With 230mm thick walls of brick msonry using brick having

crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar

1:5 (1- Cement: 5-Coarse sand) (2) B type depth 1.50 Metre for

150mm diameter sewer.

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating

and filling brickbats with dry masonry work at top for 45cm. height

including covering the top with stone including providing vatas in 1.00 3198.83 Each

C.M. 1:3 with finishing curing etc. complete as directed.

Providing and laying cement concrete flooring 1:2:4 (1cement : 2-

coarse sand : 4-graded stone aggregate 20mm nominal size) laid

in one layer and finished with a floating coat of neat cement. (A)

Providing and laying broken chine mosaic flooring for terrace using

12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring

mortar creme out upto surface using white cement including 20.00 779.70 Smt.

rounding off junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed.

Providing and laying cushioning layer on R.C.C. Slab consisting of

75mm thick lime, concrete using brick aggregate of 20mm nominal 20.00 237.18 Smt.

size mortar compresing of 1Lime : 2- fine sand)

Providing erecting and fixing double coated ISI water tank of

required capacity each with all necessary fittings and connection 4000.00 3.95 Litre

etc. complete on terrace

Providing and fixing eco-friendly light weight calcium silicate false

ceiling tiles having Tegular edge & 15 mm Thick Densified edges on

the Tile Periphery for Extra Strength The Light weight calcium

silicate ceiling tiles shall have, light reflection 85% non-combustible

as per B.S. 476 part IV, 100% humidity resistance and also having

thermal conductivity 0.043° w/m KC.for the best thermal

Insulation. The Light weight calcium Silicate tile shall be of

approved texture Fine fissured/ Spintone/Cosmos having NRCvalue

of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size

595 X 595 mm to be laid on true horizontal level suspended inter

locking metal grid of hot dipped galvanized steel sections

(galvanizing @120 grams per sqm including both side)

HALVAD NAGARPALIKA, HALVAD

consisting of main ‘T’ runner suitably spaced at joints to get

required length and size of 24X38mm made from 0.30 mm thick

(minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size

24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm

along spaced between main ‘T’ at 600mm centre to centre to form

agrid of 1200X600mm and secondary cross ’T’ of length 600mm

and size 24 x 28mm made of 0.30 mm thick (Minimum) sheet to be

interlocked at middle of the 1200X600mm panel to form grid of

size 600X600mm resting on periphery walls/partitions on a

perimeter wall angle pre-coated steel of size (24X24X3000mm

made of 0.40mm thick (minimum) sheet with the help of rawl plugs

at 450mm centre to centre with 25mm long dry wall screws @

230mm interval and laying 15mm thick Densified edges light

weight calcium silicate ceiling tiles of approved texture (Fine

Fissured / Cosmos / Spintone) in the grid including, cutting

/making opening for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc.,

wherever required, Main ‘T’ runners to be suspended from ceiling

using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with

12.5mm dia and 50mm long dash fasteners, 4mm G.I. adjustable

rods with galvanized steel level clips of size 85X30X0.8mm, spaced

at 1200mm centre to centre long main ‘T’ bottom exposed with

24mm of all T-sections shall be pre-painted with polyester baked

paint, for all heights, as per specifications, drawings and as

directed by engineer in-charge.Note:- Only calcium silicate false

ceiling area will be measured from wall to wall. No deduction shall

be made for exposed frames/opening (cut outs) having area less

than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC.

Value of 0.50 (Minimum) for Fine fissured / Spintone / Cosmos and

0.75 NRC for Globe, light reflection 85% noncombustible as per

B.S. 476 part IV, 100% humidity resistance and also having

thermal conductivity. 0.043° w/m KC.for the best thermal

Add 10% Electrification

President, Chief Officer,

Signature of Contractor. Halvad Nagarpalika Halvad Nagarpalika

HALVAD NAGARPALIKA, HALVAD