GENERAL-KPIP-Replacement of cross regulator shutters and rectification works of surplus shutters of Kanhirapuzha Canal system- General Mechanical Work

Amount

SUPPLY, FABRICATION, PAINTING and ERECTION of EMBEDDED PARTS, SHUTTER, HOISTING MECHANISM and HOISTING BRIDGE

OD34860/2024-2025:Dismantaling of the shutters (where there is road acess to the point ) from the grooves and stacking including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site (Weight of the unserviceable shutters and embedded parts may be calculated as 60% and unserviceable hoisting units as 80%).,

OD33146/2024-2025:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges.,

OD33147/2024-2025:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges.,

OD33148/2024-2025:Supply of MS round bar including cost of conveyance charges.,

85.103:Supply of MS checquered plates including cost of conveyance charges

OD33149/2024-2025:Fabrication and errection of Embedded parts for canal shutters ( lJp to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl fficer at site including cost of labour,machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.,

OD34854/2024-2025:Fabrication,Supply,Erection and Assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track,seal track,Seal seat etc as per approved specifications,drawings and directions of deptl officer at site including cost of all materials,labour,machinery for planing,welding,shearing,grinding etc,lead and lift,conveyance,incidental and handling etc complete.,

OD33151/2024-2025:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge /Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.,

OD1875/2025-2026:Providing of WORM & PINION having a lifting speed of around 5.00 cm/min for hand operation including cost of all materials, labour, hire charges and conveyance.

OD34177/2024-2025:Providing of Double worm and pinion having a lifiing speed of around 5.00 cm/minfor hand operation /manual operation including cost of all materials, labour, hire charges and conveyance..

OD34624/2024-2025:PROVIDING BASE & NUT arrangement for hoisting the shutter including cost of all materials labour etc complete.,

OD33152/2024-2025:Providing EN-8 Screw Rod 7.50 Tonne Capacity 4.00 Mtr lift Screw Rod having one number of EN-8 Screw Shaft having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all material, labour, hire charges and conveyance. (63mm Dia Screw rod ).,

OD34200/2024-2025:Hire Charges of diesel generator set at site (Maintenance of Canal Shutters).

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD34530/2024-2025:Re-Conditioning of existing EN-8 Screw rod including cost of all materials, labour charges, hire charges, energy charges, conveyance, all leads and lifts etc. complete.,

OD34209/2024-2025:OVERHAULING OF EXISTING WORM AND PINION including cost of all materials,labour,hire charges, energy charges,conveyance and all leads and lifts for CANAL SHUTTER.,

OD34198/2024-2025:SUPPLYING and STACKING of PAD LOCK.,

OD34199/2024-2025:SUPPLYING and APPLYING GREASE on NEW SCREW ROD for CANAL GATE.,

OD33153/2024-2025:Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Bridge / Platform including hand rails , ladder etc. for the same including . alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied.,

CIVIL WORKS- Demolishing, Centering & Shuttering, Concreting Work for fixing C GROOVE, SEAL TRACK, SILL BEAM and PIERS for SHUTTERS

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

4.3.3:Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts

4.2.2:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources

13.2.1:15 mm cement plaster on the rough side of single or half brick wall of mix:1:4 (1 cement :4 fine sand)

MANAF V (BID ID -2280934)

P.Damodaran, G.R.Industries (BID ID -2281949)

MOHAMMED MUSTHAFA V (BID ID -2280999)

Bidder Name

Kinanath V P

MOHAMMED MUSTHAFA V

P.Damodaran, G.R.Industries

MANAF V