Construction of Block Development Officer Residence, Dev. Block Nagrota Bagwan, Distt. Kangra H.P.

Amount

Excavation by mechanical means (Hydraulic excavator) / manual means in foundation, trenches etc. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, de-watering and/or removal of slush and incidentals, lift upto any heights, stacking the excavated soil not more than 3 mtrs (Three meters) clear from the edge of excavation and then retuning the stacked soil in 15cm (Fifteen centimeter)layers, when required into plinths, sides of foundation etc; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-in-Charge, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto all leads and lifts including ramming and watering of the earth in layers not exceeding 20 cm (Twenty centimeters) in trenches, plinth, sides of foundation and any other place with in the boundary of plot complete as per directions of Engineer -in -charge including carriage of materials within all leads and lifts. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:5:10 (One cement is to five sand isto ten graded crushed/ broken stone aggregate 40mm (Forty millimetre) nominal size and curing complete excluding cost of form work in foundation and plinth or under flooring in all depths, including pumping or bailing out water/dewatering and removal of slush as required at site complete as per HPPWD specification, as directed by the Engineer-in-Charge, and carriage of materials within all leads and lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (Forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation footings, basis of columns etcetera and mass concrete, and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto any depth/heights, up to all floor level and as directed by the Engineer-in-Charge including carriage materials of within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (square, rectangular/ polygonal in plan), up to all floor level, and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings, shelves, and the like floor, etcetra up to any thickness, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix , Cement content considered in this item is @400 kg/cum. All works upto plinth level including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.

Providing and laying mechanically mixed and vibrated design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, Cement content considered in this item is @400 kg/cum. In column plinth level upto floor V level including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.

Providing and laying mechanically mixed and vibrated design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, Cement content considered in this item is @400 kg/cum. in suspended floors roofs, landings, beams, cantilevers, girders, lintels, sides and soffits of beams haunchings, cantilevers, bressumers and lintels upto floor V level including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.

Providing and laying mechanically mixed and vibrated design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, Cement content considered in this item is @400 kg/cum. stair cases with slopping or stepped soffits excluding landings upto floor V level including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.

Providing and laying Tor steel of SAIL/ TISCO/ JINDAL/ KAMDHENU/ SHYAM STEEL reinforcement for thermo mechanically coated bars of grade Fe 550D for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals for its completion up to all floor level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete as per directions of Engineer -in -charge including carriage of materials within all leads and lifts. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Random rubble masonry/ polygonal rubble masonry (un-coursed/ brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement : six sand : twelve graded crushed/ broken stone aggregate 20mm (Twenty milimetres) nominal size) at plinth level in cement mortar 1:6 (One cement : six sand) and curing complete, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Brick work using Second class common burnt clay F.P.S. (non modular) buildings bricks of class designation 7.5 in super-structure above plinth level upto all floor level in cement mortar 1:6 (one cement isto six sand) and curing complete as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Second class half brick work using common burnt clay F.P.S. (non modular) building bricks of class designation 7.5 in super structure above plinth level upto all heights/floor level in cement mortar 1:4 (one cement isto four sand) and curing complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Dry Stone pitching 22.05 cm thick including supply of stones and preparing surface complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing first class Sal wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) and other incidentals for its completion up to all floor level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 35mm thick (thirty-five mili metres) well seasoned hollock wood glazed shutters for doors, windows and clerestory windows using 4 mm (four mili metre) thick glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws and other incidentals for its completion up to all floor level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured)and other incidentals for its completion up to all floor level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 35mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges with necessary screws and other incidentals for its completion up to all floor level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 35mm thick (thirty-five mili metres) well seasoned hollock wood wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directionnns with wire of dia 0.63 mm, for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws and other incidentals for its completion up to all floor level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing 40x5 mm (Forty X five mili metres) flat iron hold fast 40 cm (forty centimetre)long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (one cement : three coarse sand : six graded stone aggregate 20mm nominal size).complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc.Fixed to openings /wooden frames with rawl plugs screws including priming coat with approved steel primer and other incidentals for its completion up to all floor level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing hand rail of 75 X 40 MM Rectangular hollow section M.S.pipe handrail fixed with baluster 19 x 19 mm and 12 x 12 mm M.S. solid square bar in combination with MS flat 40 x 6 mm as per detail complete in all respect including applying priming coat of approved steel primer. As per specification, Drawing and direction by the Engineer in charge.

Providing and fixing hand rail 50mm Dia. MS hollow pipe handrail slip resistant with round ends at two levels at 75 Cm & 90cm Ht. welded to 25 cm dia MS hollow pipe which shall be welded to the baluster it should extend 30cm beyond the top and bottom of the ramp as per detail 50 mm dia MS hollow pipe baluster of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.

Providing and fixing 110 mm dia.on wall face PVC (D-Plast) rain water pipes of working pressure 4/6 Kg/cm2 ISI marked of Finolex / Supreme including filling the joints with approved adhesive complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing PVC clamps of Finolex / Supreme of approved design to PVC rain water pipe including cost of cutting holes and making good the walls etc;complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 250x16 mm ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 300x16 mm ISI marked oxidised M.S. sliding door bolts with nuts and screws etc.complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 200x10 mm bright finished brass tower bolts (barrel type) with necessary screws etc. complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 150x10 mm bright finished brass tower bolts (barrel type) with necessary screws etc. complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mm bright finished brass handles with screws etc.complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 125mm bright finished brass handles with screws etc. complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc.complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying (600x 600mm x 10mm) Double Charge vetrified tiles of AGL / Orient -Bell / NITCO / KAJARIA of approved shade and design, in flooring / skirting laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying 300X300 mm Full Body vitrified tiles of AGL / Orient -Bell / NITCO / KAJARIA in flooring and Full size vitrified step tiles in stair in cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying 300X450 mm 1st quality glazed tiles 8mm thick of Orient -Bell / NITCO / KAJARIA in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Painting Two or more coat on steel and other metal surfaces with Enamel Paint of required shade of approved brand and manufacture (Asian Paints/Nerolac Paints/ Burger Paints/ Dulux Paints) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough/ fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and applying 6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement isto three sand), up to all floor level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and applying Birla/ J.K.white wall care putty of average thickness 1mm (One millimtre), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete upto all floor level as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Applying priming coat with primer of approved brand and manufacture having low VOC (Volatile Organic Compound ) content with water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre .complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Distempering two coats with 1st quality acrylic emulsion paint,Asian paints / Nerolac paints, having VOC (Volatile Organic Compound ) content less than 50 (fifty) grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour complete upto all floor level as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Finishing walls with Acrylic Smooth exterior paint of required shade on New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete upto all floor level as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. .

Providing and fixing 0.60 mm thick prepainted steel sheet (ISI Marked-Z 120) of Tata Durashine / Sail / Reliance / Jindals steels in roofing withhot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete including carriage of materials within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Steel work welded in built up sections/ framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Making plinth protection 50mm (Fifty millimeters)thick of cement concrete 1:3:6 (One cement : Three coarse sand (zone - III) : Six graded stone aggregate 20 mm nominal size) over 75mm (Seventy five millimeters)thick bed of dry brick ballast 40 mm(Forty millimeters) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth and carriage of material within all leads and lifts.

Providing and fixing vitreous China wash down water closet (European type W.C. pan) of with 10 litre low level PVC flushing cistern (Sleek plus) having dual flush system of Hindware /Cera/ Jaquar of white shade with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with seat & lid fixed with C.P. brass hinges and rubber buffers,with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and and fixed with jet pressure and intergal P or S trap including jointing the trap and soil pipe with adhesive of approved brand. (Jet Spray to be measured and paid for separately) complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Wash Basin Size 500 x400 mm of HINDWARE/CERA/ JAQUAR with white shade with single hole for pillar tap, 15mm C.P brass Pillar Tap , 32mm C.P brass waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings complete (Mirror to be measured and paid for seperately) complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeters) nominal diameters C.P waste for wash basin or sink complete.

Providing and fixing 100mm (One hundred millimetre) dia chromium plated grating of superior quality for floor, gully or nahani trap complete.

Providing and fixing 15mm (Fifteen millimeters) diameters C.P. brass bib tap of ESS-ESS / Jaquar ISI marked of approved quality (superior or heavy type) and colour of prayag polynets syonet complete.

Providing and fixing 15mm (Fifteen millimeters) diameters C.P. brass Pillar tap with capstan head of ESS-ESS / Jaquar ISI marked of approved quality (superior or heavy type) and colour of prayag polynets syonet complete.

Providing and fixing 15mm (fifteen millmeters) C.P. brass angle valve of ESS-ESS / Jaquar without nuts and pipes. complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Mixer for kitchen sink with casted swinging spout at top ESS-ESS / Jaquar complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) bevelled edge mirror of superior glass mounted on 6mm (Six millimeters) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers complete.

Providing and fixing C.P. brass towel rail 600X20 mm of ESS-ESS / Jaquar complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

Providing and fixing chromium plated brass toilet paper holder of approved brand and manufacture continental series of Jaquar/contessa series of Hindware complete.

Providing and fixing 8 mm dia C.P. / S.S. Jet of ESS-ESS / Jaquar with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing G.I. inlet connection pipe for each flush pipe with W.C. pan. complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeters) nominal bore brass full way valve with wheel complete of ESS-ESS / Jaquar.

Providing and fixing 20mm (twenty millimeters) nominal bore brass full way valve with wheel complete of ESS-ESS / Jaquar.

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge. 1620 (20 mm OD) pipe

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge. 2025 (25 mm OD) pipe)

Providing and fixing 20mm nominal bore in trenches Galvanished mild steel tube of Tata / Jindal or equivalent (medium grade) tube fitting and clamps including making good the wall, ceiling and floor :

Providing and fixing 32 mm dia M.I.union for Wash basin and sink .complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank of Finolex / Supreme having tripple layer of Supreme , Finolex , Vectus IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.1000Ltrs.

Providing and fixing ISI marked P.V.C floor trap of Finolex / Supreme of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etc.complete.110x75mm (One hundred ten millimeter into ninety milimeter)

Providing and fixing 75 mm dia.on wall face PVC (D-Plast) siol water pipes of working pressure 3.8 mm thickness ISI marked of Finolex / Supreme including filling the joints with approved adhesive complete as per approved drawing , design and specifications.

Providing and fixing 110 mm dia.on wall face PVC (D-Plast) soil water pipes of working pressure 3.8 mm thickness ISI marked of Finolex / Supreme including filling the joints with approved adhesive complete as per approved drawing , design and specifications.

Providing and fixing P.V.C single equal branch with oval access door, of Finolex / Supreme insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive. 75mm nominal bore/diameters.

Providing and fixing P.V.C single equal branch with oval access door, of Finolex / Supreme insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive.110mm nominal bore/diameters.

Providing and fixing PVC door bend with oval access door, of Finolex / Supreme insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete.75mm nominal bore/diameters.

Providing and fixing PVC door bend with oval access door, of Finolex / Supreme insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete.110mm nominal bore/diameters.

Providing and fixing ISI marked PVC collar of Finolex / Supreme complete upto all floor level as per HPPWD specifications and as directed by the Engineer-in-Charge, including fixing with approved adhesive .75mm nominal bore/diameters.

Providing and fixing ISI marked PVC collar of Finolex / Supreme complete upto all floor level as per HPPWD specifications and as directed by the Engineer-in-Charge, including fixing with approved adhesive .110mm nominal bore/diameters.

Providing and fixing P.V.C. plain bend of Finolex / Supreme Confirming to IS No.-14735-99 including filling the joints with approved adhesive.75mm nominal bore/diameters.

Providing and fixing P.V.C. plain bend of Finolex / Supreme Confirming to IS No.-14735-99 including filling the joints with approved adhesive.110mm nominal bore/diameters.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Inside dimensions 455x610 mm and 45 cm deep for single pipe line : 19.30.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With Sewer bricks conforming to IS : 4885 each 9650.15.

Providing and fixing 500mm (five hundred ten millimetre) light duty rectangular C.I. manhole with frame cover weight 38KG (thirty eight kilograms) (single seat) including entire carriage of material within all leads and lifts and other incidentals.

Providing 200mm cast iron rings with chequred or ribited non soil surface including and fixing in man hole with cement concrete block 200 x 200 x 200 mm 1:3:6 mix (1 cement : 3 coarse sand :6 graded stone aggregate 20mm nominal size). including entire carriage of material within all leads and lifts and other incidentals.

ABHINAV DHIMAN (BID ID -526504)

Alpna Sharma (BID ID -526451)

BIKRAM SINGH (BID ID -524999)

Ajeev Kumar (BID ID -526446)