PROVN OF 02 GUARD POST, PROVN OF BDY PILLAR WITH BARBED WIRE AT DEF LAND, SPL REP/RENOVATION OF GUEST ROOM AT BLDG NO T-18 (OFFICER TRANSIT FACILITY), SPL REP TO BLDG NO T-13(OFFICE COMPLEX) AT 119(I) INF BDE GP OMC CHAMPAWAT AT MIL STN PITHORAGARH

Amount

DESCRIPTION OF ITEMS

Site Clearance in hard/ dense soil all as spd and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/ dense soil all as spd and directed

S & F galvanized 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolt, including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc all as specified and directed

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in hard/dense soil complete all as specified and as directed.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed.

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm (hard/dense soil)

Filling under floor (except material) including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified.

Removing excavated material (Soil) n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in columns, pillars, piers etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in beams, cantilever, lintels etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in slabs supported on walls, beams and columns etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in chajjas/shelfs complete all as specified and as directed.

M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for Fair finished surface of concrete

M&L form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc rough finished surfaces of concrete flat all as specified.

M&L form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) for rough finished surfaces of concrete flat all as specified.

M&L form work to chullah hoods, chajjas/shelfs and similar items incl edges rough finished surfaces of concrete flat all as specified.

M&L form work to sides of pillars, posts, struts, columns for rough finished surface of concrete

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and binding with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified.

Description same as above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders

M&L Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius, and setting in cement mortar 1:6 complete all as specified and directed .

M&L Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius, in half brick thick walls built in setting in cement mortar 1:4 complete all as specified and directed .

M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 mixed with water proofing compound as per manufacturer instruction, finished fair and even complete all as specified and directed. (WPC measured separately)

M & L 15 mm thick cement plaster on other than fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even complete all as specified and directed.

M&L 5mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection complete all as specified and directed

Supply only water proofing compound, complete all as specified and directed.

M&L for hard core of broken stone or boulders gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface of broken bricks aggregate, all as specified.

M&L for 75mm thick PCC 1:4:8 of type D-2 using 40mm graded stone aggregate as in sub base of floors etc complete all as specified and directed.

M&L PCC 25mm thick 1:2:4 of type B1 using 20mm graded stone aggregate as in floors finished rough and uneven complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection laid in alternate panels 75mm thick finished even and smooth w/o using extra cement.

Forming construction joints 30mm deep x10mm wide filled with sealing compound grade "A"

M&L for three coats of white wash on ceiling/Chhajja (undecorated) surfaces incl preparing of surfaces complete all as specified and directed.

M&L for two coat OBD on newly plastered wall surface with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1 mm thickness prepared and sanded with electrically operated sanding machine. Application to be done through the authorised applicator of manufacturer complete all as specified and directed.

M&L for water proofing treatment to roofs surfaces including a coat of cold applied bituminous shalitex primer @ 0.30 Lit per sqm evenly on roof surface and a coat of hot blown bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3mm thick APP modified polymeric membrane (weight not less than 3.0 Kg/Sqm) unrolled and bonded completely to the substrate with side over lap of 75 mm & end over lap of 100 mm and then scaled/ fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm shall be applied on top of APP modified polymeric membrane as per manufacture instruction and finally it will be finished with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm, complete all as specified and as directed.

M&L for applying two coat exterior emulsion paint (weather coat of Berger or equivalent ) on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed..

M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed

M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in floors over and including 15 mm thick screed bed in CM 1:4 as in DADO/ SKIRTING etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed

S&F coloured Glazed ceramic tiles in vertical surface 1200mm X 600 MMx7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

Cutting chases in brick wall, stone concrete block or slab walls, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades, shelves , lintels, etc and cutting chases for concealed water tubing and making good , cutting n'exc 10 cm girth complete all as specified and directed.

S&F 15 mm bore medium grade galvanized steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S&F 20 mm bore medium grade galvanized steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S&F 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F CP Brass central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed .

S&F 15mm bore fancy type, CP Brass Bib taps with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F 15 mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed .

Do - all as per above item but 20 mm bore

S & F vitreous china wash hand basin, white, size 550 x 400 mm including brackets, chromium placted waste coupling &PVC waste pipe of 32 mm dia complete all as specified & directed.

S&F 600mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S&F Brass chromium plated Tubular towel rail , 20mm dia, D type , 60cm long between falnges complete all as specified and directed.

S&F vitreous China wash down water closet (pedestal pattern) complete, incl toilet paper holder, Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, health faucet jet (excluding flushing cistern and flushing pipe) all as specified.

S&F10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level,white with inlet ball valve, float and handle complete all as specified and directed.

S&F 500 liters capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms ) incl connections all as specified. Make-Sintex (triple layered)

S&F 110 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius

S&F 75 mm bore PVC (SWR) bends any radius

S&F 110 mm bore PVC (SWR) junction single (Single T) equal or unequal

S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

S&F anodized aluminium door & frame powder coating (minimum thickness of powder coating 50 micron) 2 mm thick incl 5.50mm thick frosted glass/ ACP sheet, fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02 Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200mm long 02 Nos on each shutter and mortice lock device complete with double keys for each lock, 01 No floor spring for each shutter complete all as specified and directed with following specifications :- (a) Aluminium door frame =101.50x44.45mm (b) Aluminium style/top & middle rails of shutter=83.5x44.45mm (c ) Aluminium bottom rail of shutter=114.50x44.45mm (d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed.

S&F 15mm bore fancy type bib taps (Two way ) brass chromium plated screwed down ,screwed for iron pipe or for brass ferrule including flench complete all as specified & directed .

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief.

S&F Sheet glass, ordinary quality and glazing with oil putty/ wooden beading/ or aluminium bidding in square/rectangular in each pane 4-4.5mm thick incl solar control film 25 micron reflected type sticked to glass pane as per instructions of manufacture

S&F in repairs Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self

Dismantling timber scantlings in framed work in section, in any position all as spd and directed

S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails all as spd and directed

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over metal frame work and reinforced with G.I. Wire mesh (INCLUDING Fillets, metal frame work and G.I. wire mesh)

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to CURVED surface over metal frame work and reinforced with G.I. Wire mesh (INCLUDING Fillets, metal frame work and G.I. wire mesh ) all as spd and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed

S&F double charged vitrified tiles 7 to 8 mm thick area of each tiles exceeding 0.38 sqm and not exceeding 1 sqm in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and . and pointed in white or coloured cement to match all as specified and directed

Ditto all as per item No 73 but on vertical surfaces over 10 mm thick rendering in CM 1:4

S&F non skid tiles, exterior grade, chequered/grooved pattern of size 600x600mm 8-10mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and incl 15mm thick cement screed bed in CM 1:4 complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for.

M&L precast cement concrete Block Masonry with solid blocks type C1 1:3:6 20mm graded stone aggregate exc 10 cm in width and setting in mortar 1:6 incl Demolition of Precast concrete block walling built in cement mortar complete all as specified and directed .

M&L PCC 1:2:4 type B1 (20mm graded aggregates) as coping, bed block, Haunching/ benching of drains/coving/ sides of any type of tiles etc and similar work

M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels and drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl forms , moulds ,mitred stopped ends etc.

M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 finished fair and even complete including Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc. all as specified and directed.

M & L 15mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even complete including Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc. all as specified and directed.

S&F in repairs 15 mm bore medium grade galvanized steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor including taking down complete all as specified and directed.

S&F in repairs 20 mm bore medium grade galvanized steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor including taking down complete all as specified and directed.

S&F in repair 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair CP brass wall mixer (with L bend for supply to shower) for mixing hot & cold water screwed down for iron pipe and fixed

S&F in repairs CP Brass single lever basin mixer with 300 mm extended body and 600 mm braided connection pipe for mixing hot & cold water screwed down for iron pipe and fixed

S&F in repair 15mm bore fancy type, CP Brass Bib taps with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F in repair 125 mm CP brass shower rose for fixing with 15mm pipe complete all as specified and directed.

S&F in repair 15 mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed.

Ditto all as per above item but 20 mm bore

Granite (of any type) work (table rubbed and polished) 16-18 mm thick in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed of CM (1:6) including dismantling of existing stone slab complete all as specified and as directed.

S & F in repairs table top vitreous china hand wash basin of shape as decided by engineer in charge snow white exclusive quality incl waste pipe and waste coupling complete all as spd and directed

S&F in repairs 600mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S&F in repairs Brass chromium plated Tubular towel rack , 20mm dia, D type , 60cm long between falnges complete all as specified and directed.

S & F in repairs vitreous china wall mounted wash down water closet with builtin flushing cistern and closet seat cover including all necessary fittings and making good to wall surfaces complete all as specified and as directed.

S&F in repairs 1000 liters capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms ) incl connections all as specified.

Taking down chowkats or frames exc. 1.5 but n.exc 4m2 each with shutters (W/o taking off shutters from the frame) and removal to store.

-Ditto- but n.exc 1.5m2 each -ditto-.

S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc Including cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as for filling in door frames etc complete, as specified and as directed.

S&F 30 mm thickness Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as spd and directed

S & F 35mm thick second class hard wood glazed and skeleton door shutters (three panels), open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads or securing glass etc, size of members of shutters all as per clause No 8.20 (a) of SSR Part-I (2009).

S&F 200mm aluminium anodised barrel tower bolts of extruded section all as specified.

S&F 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified

S&F Extruded aluminium alloy handles, fabricated type, anodised size-150mm complete all as specified and directed.

S & F M.S. Framed work such as grills grating etc. with ends of bars shouldered and / or riveted into spikes, framed guard bars / railings all as directed.

S&F in repair 20 mm dia fancy type SS Curtain rod fixed with SS bracket and lattoo to wall complete as sample approved all as specified and directed by Engr - in - charge.

M & L preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces all as specified.

M & L Preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified.

Taking down eaves gutters and rain water pipes ( any size or pattern) incl all fittings , shoes, bends, swan neck etc. and removal to store

S&F 75 mm bore PVC (SWR) junction single (Single T) equal or unequal

S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

S & F in repair 40mm dia light garde GI Pipe spout in wall, floors complete all as specified and directed.

S&F double legged door stopper of aluminium alloy with rubber all as specified and directed by Engr-in-charge.

M&L for complete removal of existing treatment using mechanical device and applying two coat exterior emulsion paint (weather coat of Berger or equivalent ) on old plastered wall with airless electric sprayers after prepairing old surface applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed..

M&L for complete removal of existing treatment using mechanical device and applying two coat oil bound distemper on old plastered wall with airless electric sprayers after prepairing old surface applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed..

M & L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole cover, shelves, chajjas etc and set in CM 1:6 complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.

M&L for RCC type B1 (1:2:4), 20 mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanized steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners,Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured or payment purpose.) (A) Area not exceeding 2.00 sqm each.

Supply and fixing factory made uPVC white colour fixed glazed ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass and wiremesh shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and Fixing sheet glass (frosted or obscured or ground) 5.5mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.63 mm nominal dia of bar and 1.40 mm average width of aperture ,fixed with tined tacks or galvanized wire staples complete all as specified and as directed.

S&F in repair 0.63mm thick galvanized corrugated mild steel sheeting with two corrugation side laps fixed with coach screws and washers in roofs etc with grade of zinc coating 275 complete all as specified and as directed

Supply and fixing in repair 0.63 mm thick plain galvanized mild steel sheeting as in ridges, hips, valley gutter, drip, crumple and straight flashing (length and girth as fixed) with grade of zinc coating 275, complete all as specified and as directed

Prepairing new zinc (or galvanized ) surfaces to receive painting , by coating with mordant solution including washing and cleaning ,etc.

M&L for preparation of new steel roof surfaces of corrugated/ plain steel sheet of any description, over 10cm in width or girth, not otherwise described and applying two coats of antisol roof paint (MB Green) complete all as specified and as directed.

M&L 4 mm thick E board tiles for insulation and acoustic purpose 60X60 cm with and including powder coated galvanium iron snap grid with 32X25X1.5 mm thick tee section and 32X25X1.5 mm thick angle section with all hanging /supporting arrangements as in false ceiling incl taking down old ceiling with frame and making good disturbed surface complete all as specified and directed .

S & F in repair Kitchen plate rack of stainless steel of size 720mm x 600mm x 230 mm made out of 1 mm thick steel sheet complete all as specified & directed.

S & F in repairs vitreous china hand wash basin ( OVAL IN SHAPE) white exclusive quality, size 520 X 450 X 200 MM incl PVC waste pipe and waste coupling cutting for and pinning in ends of brackets or erecting stand fixed complete all as specified and directed.

S&F in repairs vitreous China wash down water closet (pedestal pattern) complete, incl toilet paper holder, Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, health faucet jet (excluding flushing cistern and flushing pipe) all as specified.

S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle complete all as specified and directed.

S&F in repairs 8 MM thick hollow PVC panelling consisting of alternate hollow section in wooden finish or any colour wall paneling inclusive of fixing on to wall .as per specifications and drawing all as specified and directed

S&F in repairs Sheet glass, ordinary quality and glazing with oil putty/ wooden beading/ or aluminium bidding in square/rectangular in each pane 4-4.5mm thick incl solar control film 25 micron reflected type sticked to glass pane as per instructions of manufacture

S& Fas in repairs 150 mm extruded aluminum alloy handles, fabricated type anodised.

S&F as in repair 100 mm Butt hinges, medium weight, cold rolled mild steel, fixed to steel frames with and including welding etc complete all as specified

Taking down carefully Aluminium point wiring (Light fan socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc), removing materials from site and making good disturbed surface of walls, floors etc, complete all as specified and directed.

Taking down Sub main wire including with GI wire earth wire of any size, fixed in any position, complete all as specified and directed.

M&L for point wiring Concealed type with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded sheathed copper conductor cable including rigid non- metallic PVC concealed conduit 20 mm or higher dia, medium grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, sheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for the following :- (a) One light point/ fan point point controlled by one, one way switch of 5/6 Amps.

Ditto all as per Item No 145.01 above but for (b)one socket outlet three pin 5 amps control by one switch on the same board

Ditto all as per Item No 145.01 above but for (c)one socket outlet three pin 5 amps control by one switch on independent board

All as per item 145.01 here in above but with 4 Sq mm cable (FRLS) for one 15 Amp socket outlet controlled by one switch on independent board and 4 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete.

S & F of Modular Switch 1 way 6A,one module all as specified and directed.

S & F of Modular Switch 1 way 16A,one module all as specified and directed.

S&F of Modular Socket,6A - 2/3 pin combined 2 Module complete all as specified and directed.

S&F of Modular Socket,6A/16A - 2/3 pin combined 2 Module complete all as specified and directed.

S & F white cover plate with frame modular type of 03 module complete all as specified and directed.

S & F white cover plate with frame modular type of 04 module complete all as specified and directed.

S & F white cover plate with frame modular type of 06 module complete all as specified and directed.

S & F metal flush box modular type of 03 module complete all as specified and directed.

S & F metal flush box modular type of 04 module complete all as specified and directed.

S & F metal flush box modular type of 06 module complete all as specified and directed.

S & F electronic modular fan regulator stepped type with five step,single module 100 Watts 240 Volts on the existing phenolic laminated sheet AC, SP 230 volts complete as all specified and directed.

Supply and Fix ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.

S&F of Lamp holder, insulated body with back plate suitable for batten /angular fittings, fixed on with & including round block 8 cm dia, 4 cm depth, closed recessed type & making connection etc complete all as specified & directed.

Supply and Fixing in replacement of LED 12 W bulb complete all as specified and directed.

Supply and fixing in repair of LED Tube light 4 feet long fitting 1 x 20 W,220V, AC decorative Alluminium box type with driver, holding including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and direced.

Supply and Fix in repair of Ceiling light 1x36 Watt Recessed mounted LED liminaire with CRCA Housing and with its ultra bright LEDs provides uniform light distribution which make it best in class proposition for modern work spaces.suitable for grid ceiling an additional mounting frame is required and including taking down old fitting complete all as specified and directed.

Supply and Fixing in repair of factory made epoxy powder coated MCB DB sheet metal enclosure for DB, TPN (IP 54) 8 way having protection with 200 amps rated bus bar, 415 volts, made out of 16 gauge sheet steel double door including grouting suitable for housing MCB's and isolators with metal door(IP-43 protection) fabricated from minimum 1.6 thick CRCA sheet and fixed flush to wall and suitable for universal mounting complete all as specified and directed.

Supply and Fix in repair MCB DB sheet metal enclosure , SPN, 12 way having protection with 200 amps rated bus bar, 440 volts, double door, including grouting suitable for housing MCB's and isolators, complete all as specified and directed

Supply and Fix in repair MCB DB sheet metal enclosure , SPN, 8 way having protection with 200 amps rated bus bar, 440 volts, double door, including grouting suitable for housing MCB's and isolators, complete all as specified and directed.

Supply and Fixing in repair MCB DB sheet metal enclosure fo DB,SPN, 4 way havin protection with 200 amps rated bus bar,240 volts,single door type, suitable for housing MCBs and isolators,surface in wall complete all as specified and directed

Supply and Fixing in repair MCB single pole,240 volts,6-32 Amps 'B' curve of of 10 KA complete as specified and directed.

Supply and Fixing in repair MCB single pole & Neutral ,240 volts,6-32 Amps 'B' curve of of 10 KA complete as specified and directed.

Supply and Fix in repair MCB single pole & Neutral 240/415 volt,50 Hz, 40 Amps, 'B' curve of 10 KA complete all as specified and directed.

Supply and Fix in repair MCB Four pole 240/415 Volts, 100 amps, 'B' curve of 10 KA complete all as specified and directed.

S & F in replacement sheet metal enclosure with socket plug top and MCB with two pin earth plug socket complete with one single MCB 20 Amp complete all as specified and directed.

Material & Labour for sub main wiring with 1100 volts grade PVC insulated and unsheathed cable with stranded copper conductor 2x6 Sqmm, of code Red for Phase,Black For Neutral & Green For Earth concealed in wall and drawn including medium grade PVC conduit along with 6 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.

S&f in repair IP 66 Integral LED Bldg security light liminairee 60 Watt 230 Volts made of pressure die cast aluminium housing with high power LED lens & heat resistant toughened glass,efficiency 110 lumens/watt,external 10KV,440V SPD and in built 4KV, IP 67 Potted isolated driver with operating range 902V to 340v AC. CCT 5700K,LED life-1 lakh burning hours,fixture should withstand320 volt upto 48 hrs,auto cutt off>320 volts &restart,4o volt sustain upto 8 hrs, NABL Acreddited LM 79 report including GI pipe 40 mm, medium grade 1.7 mtr long mounting bracket and providing fixing clamps,bolts,nuts of suitable size complete all as specified and directed.

Material and Labour in repair earthing complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 m deep below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel all as shown in earth plate No 3 connected to earthing test point all as specified or indicated including testing on completion.

Supply and Fix of bell push AC SP 240 volts flush type 5/6 Amps, single pole one way complete as all specified and directed.

Supply and Fix in repair of electronic ding dong bell musical sound bell,AC,230 Volts, single pole as approved, complete as all specified and directed.

S & F white cover plate with frame modular type of 02 module complete all as specified and directed.

S & F metal flush box modular type of 02 module complete all as specified and directed.

S& F in repair of Olivia LED Spot light ABR 5 W 3000K New generation,energy saving,aesthetically designed,recessed mounted down light with pressure die-cast aluminium heat sink & high efficiency long life complete all as specified and direced.

Supply and fixing in repair of LED light fitting mirror type with high out put diffuser 2 feet,10 watt 220 V VAC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and direced.

S & F in repair of 7.5 Watts LED Flament Lamp Gate light in aluminium die cast with modern artistic design and white PC diffusersuitable for retrofit LED lamps mouting pole dia 156 mm Dimensions dia 189mm& height 370mmcomplete all as specified and direced.

Supply laying and testing in replacement of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric cables (heavy duty) with stranded aluminium copper conductor , 1100 volts grade of size 4 core 16 Sqmm including suitable cable gland, lugs complete all as specified and directed.

M&L local sand dry, filling in trenches around under ground cable complete all as specified and directed.

M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed.

Supply and fix in replacement of exhust fan made of sturdy Engineering plastic complete with louvers shutter,voltage 230V,50 Hz,RPM 1200,Copper winding of sweep 250mm,energy saving ,heavy duty totally enclosed,heavy duty motor with die cast aluminium rotor mounted on two ball bearings including cutting hole for fixing exhaust fan to wall and making good the disturbed surfaces(including making holes in wall, plastering,necessary brickwork and distempering) to match with the existing specification,connecting electrically using 3 core 0.75 sqmm PVC insulated flexible copper conductor cable complete all as specified and direced. Note It is deposit to MES Store yard.

Supply and Fixing in replacement of LED 9 W bulb complete all as specified and directed.

Supply and Fixing in repair of factory made epoxy powder coated MCB DB sheet metal enclosure for DB, TPN, 4 way having protection with 200 amps rated bus bar, 415 volts, made out of 16 guage sheet steel double door including grouting suitable for housing MCB's and isolators with metal door(IP-43 prodtection) fabricated from minimum 1.6 thick CRCA sheet and fixed flush to wall and suitable for universal mounting complete all as specified and directed.

Supply and Fix in repair of MCB TPN 415 volts, 40 amps, C Curve of 10 KA complete all as specified and directed.

M/S RAMESH SINGH ADHIKARI (BID ID -3413409)

R K CONSTRUCTION (BID ID -3412450)

M/s Rana Enterprises (BID ID -3412136)

G R INFRATEH (BID ID -3419108)

M/s J P Traders (BID ID -3418864)