CONSTRUCTION OF PROJECT OFFICE FOR PROVISION OF CGRPT (KOCHI) AT WILLINGDON ISLAND ,KOCHI

Amount

Excavation in trenches n.exc 1.5 M wide and n. exc 1.5 M depth and getting out in soft/loose soil getting out complete all as specified and as directed.

Material and labour for plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete including necessary form work complete all as specified and as directed.

Returning, filling in soil including spreading leveling, watering and well ramming in layers n.exc.25cm thick complete all as specified and as directed.

Removing excavated material / soil to a distance n.exc 50m away and depositing where as directed at a level n.exc 1.5m above the starting point, complete all as specified and as directed.

Material and labour for hard core with broken stone or boulders of gauge not exceeding 63 mm, deposited, spread, and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface all as specified and as directed.

Material and labour for 100mm thick plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base of floors including necessary form work all as specified and as directed.

Material and labour for precast PCC 1:3:6 using 16 mm graded aggregate solid block masonry exceeding 10 Cm width, built in cement mortar 1:6 all as specified and as directed.

Material and labour for precast PCC 1:3:6 using 16 mm graded aggregate solid block masonry not exceeding 10 Cm width(with plain or interlocking joints as directed), built in cement mortar 1:6 all as specified and as directed.

Material and Labour for RCC 1:2:4 type B1 using 20mm graded stone aggregate as in foundation footing, raft, plinth beam, brass beam, column etc complete all as specified and as directed.

Material and labour for reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in as in beams, cantilever, lintels over 1.5M span etc complete all as specified and as directed.

Material and Labour for reinforced cement concrete M30 design mix using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and as directed

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete all as specified and as directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams to rough finished surface of concrete for flat complete all as specified and as directed.

Use and waste for form work to sides of concrete surfaces of columns/pillars, square or rectangular in plan, fair finshed surfaces all as specified and as directed.

Material and Labour for TMT(CRS/HCR) bar 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping ,for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Supply and Fix TMT(CRS/HCR) bars 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for Plain cement concrete 1:3:6, type C1, using 20mm graded stone aggregate as in copings, kneelers, apex stones,bed plates, kerbs, bed block for hold fast including necessary form work all as specified and as directed.

Supply and fix rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats conforming to Fe-410W(Gde E-250) quality A complete all as specified and as directed.

Supply and fix mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with rivetted or bolted or welded attachment all as specified and as directed.

Supply and fixing pre-colour coated high tensile strength corrugated galvalume sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through specialist agency complete all as specified and as directed.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through through specialist agency and complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint over one coat of red oxide primer on new steel surfaces over 10 cm wide or girth including preparation of surface etc., complete all as specified and directed.

Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces in C M 1:4 with finished even and smooth (without using extra lime or cement) all as specified and as directed.

Material and labour for rendering 15mm on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair without using extra cement complete all as specified and directed.

Supply and fix anodised aluminium snap grid frame work for false ceiling with 605mm x 605mm size, consisting of main Tee of size 23.50mmx36.50mmx1.50mm, cross Tee of size 23.50mmx23.50mmx1.50mm and wall angle of size 36.00mmx25.00mmx1.50mm of approved make including all necessary cuttings, fixing of aluminium section firmly in position with and including steel hangers 6 mm dia G.I. wire (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 40 mm long in soffit of slab/walls complete all as specifed and as directed including provision of 12mm thick Moisture Resistant Gypsum board 600mmx600mm size, fixed in ceiling, flat or sloping and applying two coats of acrylic distemper over a coat of primer complete all as specified and directed. Note :- Rate quoted above shall be deemed to include for making holes, cutting chassis if any required and making good to existing walls in cement mortar 1: 3 to match with existing surface finish as directed at site.

Material and Labour for non-skid coloured Ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not excceding 0.18 sqm, in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

Material and Labour for Non-skid light coloured Ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not excceding 0.11 Sqm, as in vertical surfaces such as skirting/dado/riser to steps etc, set and jointed in cement mortar and pointed in white or coloured cement to match, laid over backing coat of 10mm thick in CM 1:3 complete all as specified and directed.

Material and Labour for non-skid coloured Ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06sqm but not excceding 0.11 sqm, in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

Material and Labour for glazed ceramic coloured Digital wall tiles (including Digital Highlighters etc) in vertical surfaces of size 450x300x7 to 8 mm thick including and with matching highlighter set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including rendering 10 mm thick in CM 1:3 as backing of wall tiles complete all as specified and as directed.

Material and Labour for 75mm thick Plain Cement Concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection, floors, pavings and hardstanding etc, finished even smooth without using extra cement etc including necessary forwork complete all as specified and as directed.

Material and labour for preparation of of new plastered/concrete surfaces of walls and applying two coats of acrylic distemper of approved shade/tint over a coat of primer, over 3mm thick wall care putty finish to achieve uniform smooth surface of wall all as specified and as directed.

Material and labour for applying two coats of cement base paint over a coat of primer on wall including preparation of new surface of wall complete all as specified.

Material and labour for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with shine pinned at joints, fixed to wall and making good to wall all as specified and directed.

Supply and fixing 35 mm thick Flush shutters, solid core construction, with block board core and plywood face prelaminated decorataves panels, commercial type on both sides complete all as specified and as directed.

Supply and fixing 35mm thick 2nd Class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc., divided into squares , edges of framing plain chamfered or rounded, mitred and rebated sash bars, any numbers, size of members of shutters as specified in SSR Part-I Section 8, clause 8.28 (a) for windows and doors.

Supply & Fix stainless steel wire cloth 0.36mm nominal dia of wire and average widht of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fixing Solid PVC Door Frame of size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, supporting & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and Fix factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification and drawing given in SSR Part-II complete all as specified and as directed.

Supply and fix aluminium handles fabricated type anodised of size 100mm complete all as specified and as directed.

Supply and Fix 200mm long aluminium barrel tower bolt complete all as specified and as directed.

Supply and Fix 100mm long aluminium anodised barrel tower bolt all as specified and as directed by Eng-in-charge.

Supply and fix stainless steel Butt hinges stainless steel hinge pin and fixed 100mm size complete all as specified and directed.

Supply and fixing 250 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete.

Material and Labour applying two coats synthetic enamel paint over one coat of red oxide primer on wooden surface any description over 10 cm in width or girth not otherwise described including preparation of surface etc., complete all as specified and directed.

Supply and fixing galvanised steel water tubing medium grade 15 mm bore including all necessary fittings, fixed to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fixing galvanised steel water tubing medium grade including all fitting concealed in floors, walls and ceilings of size 20mm bore complete all as specified and as directed.

Supply and fix stop valves/angle cock, 15mm bore, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fix soap dish vitireous china white 160x160x90mm (Approximate) complete all as specified and as directed.

Supply and fix Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified.

Supply & Fixing Bib taps, 15mm bore, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

Supply and fixing Vitrious China wash down water closet Anglo Indian pattern semi pedesatl pattern white excluding flushing cistern and flush pipe including P or S trap making good the floor to match with existing floor complete all as specified and as directed.

Supply and fix 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450mm long PVC Connection and connection to trap, and to flushing and making good to floor complete all as specified.

Supply and fixing vitreous China wash hand basin, white, flat back size 630X450mm including 32mm brass chromium plated waste fitting, a pair of cast iron bracket duly painted including cutting and pinning in ends making good disturbed surfaces in CM 1:3 excluding pillar tap but chain , plug and porcelain stopper, brackets etc all as specified and as directed.

Supply and fixing 600 mm long PVC connections 15 mm size with PTMT nuts at both end complete.

Supply and fix toilet paper holder vitreous china, box type coloured complete all as specified and directed

Supply and fixing pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down, long shank, and fly nut, high pressure, screwed for iron pipe of 15 mm bore all as specified and as directed.

Supply and fix Chromium plated steel grating 100mm dia complete all as specified and as directed.

Supply and fix health faucet(ABS body) 15mm dia up to 1.25 metre long first quality chromium finished including ABS wall hook to hold the faucet in wall all as per manufacture instructions and as directed. Make. Parryware/Hindware or equivalent.

Supply and fix PVC pipe (SWR) single socketed in any length with rubber ring joint 110mm dia fixed to wall complete all as specified and as directed.

Supply and fix PVC (SWR) Tee/bends 110mm with access door complete all as specified and as directed.

Supply & Fix PVC (SWR) pipes 75 mm dia. single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

Supply and Fix PVC (SWR) bend 75 mm dia with access door complete all as specified and as directed.

Supply and fix 500 litres capacity tripple layer, rotational molded, polythene water storage tank with cover (Cylindrical vertical with closed top),colour white , hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed.

Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20 mm bore complete all as specified and directed.

Supply and fixing 6 mm thick bevelled edge looking mirror of size 600 x 450 mm mounted on 6 mm thick AC Building board or commercial plywood/hard board backing and fixed to wooden plugs with CP Screws and cup washers all as specified and as directed.

Supply and fix aluminium powder coated section for doors, windows, ventilators, partitons, one or more rebates with and including jointing cleat for fixing with standard aluminium sections for frame complete all as specified and as directed. Note: Glass/plywood Panel shall be measured and paid separately seperately.

Supply and fix powder coated, aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

Supply and fix Anodised aluminium door shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised hinges suitable handle (2 nos.) complete all as specified and directed. Note: Glass pane shall be measured and paid separately.

Supply and Fixing 4.8mm thick sheet glass ordinary quality in square not exceeding 0.5 Sqm in each pane for fixing in aluminium joinery as specified and as directed.

Supply and fix LLDPE moulded septic tank 25 Users capacity including all connected inlet and out let, vent shaft, disgned to carry sewage and sullage water laid over 150mm thick plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate and properly haunched and fixed including necessary earth work excavation complete all as specified and as directed. Make: Sintex/AquaTech/Supreme

Material and Labour for point wiring complete using 1.5 Sqmm PVC insulated unsheathed copper conductor, stranded cable (FR) upto and including working voltage 1100volts grade, drawn through and including non metallic rigid PVC conduit not less than 20mm drawn in concealed conduit in wall and open conduit on ceiling including all accessories ISI marked including factory made galvanised modular flush sheet metal enclosure having top bottom side and back wall knock out for conduit entry from any direction suitable to the approved make of switch/socket outlet conforming to IS 14772-2000 and suitable for for cover plates and unsheathed copper conductor stranded cable (FR) earth continuity wire connected to DBs/sunken boxes/fittings of size 1.5 Sqmm Cross sectional area and all other metal parts with earth dolly for the following:- (a) one light point controlled by one switch 5 Amps

(b ) one fan point point controlled by one switch 5 Amps

(c) One 3 pin socket outlet 5 Amps on Independent board

(d ) One 3 pin socket outlet 5 Amps on same board

All as per Item No. 71 above but with 4 sq mm PVC insulated copper conductor cable(FR) including 4 sq mm PVC copper conductor used as earth wire for power point on independent board for One 3 pin socket outlet, 15 Amps.

Supply and fix Modular switch one way 6A, 1 Module complete all as specified and as directed.

Supply and Fix Modular Socket, 6 A- 2/3 pin combined 2 module complete all as specified and as directed.

Supply ans fix Modular socket combination 16 A, 6 pin, 3 module complete all as specified and directed.

Supply and fix Ceiling rose in poly carbonate 3 plates flush type 6 Amps, 230 volts AC complete all as specified and directed.

Supply and fix LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make: Havells /Philips/Bajaj.

Supply and fix in repairs LED light fitting mirror type with high out put diffuser 2 feet,10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Havells / Crompton Greaves / Philips / Wipro/ Bajaj

Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep min air delivery 210 CFM service value 6.00 BEE. Five Star rated with brushless direc current motor (BLDC) complete all as specified and as directed.

Supply and fix Exhaust Fan of size 300 mm sweep with louvers, with metal body AC 230 V, 50 Hz, 1200 RPM and connecting to ceiling rose terminals with 23/.0076 flexible cable including cutting and chasing in wall for making a round/square hol suitable for 300 mm sweep exhaust fan and making good disturbed surfaces of wall, floor or ceiling with plaster or tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface and making good the disturbed surface to match with existing finishes complete all specified and directed. Make:Havells/ Usha/Crompton Greaves.

Supply and fix MCB SP, 240 Volts, 6 to 32 Amps, breaking capacity of 10 KA, 'C' Curve complete all specified and as directed.

Supply and fix MCB SPN, 240 Volts, 40 Amps, breaking capacity of 10 KA, 'C' Curve complete all specified and as directed.

Supply and fix in repairs Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, SPN 8 way with 200 Amps rated copper bus bar double door protection, neutral bar,earth bar, single pole and neutral 240 volts, MCBs used as incommer Double door, flush to wall complete all as specified and directed .

Supply and fix in repairs Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, SPN 12 way with 200 Amps rated copper bus bar double door protection, neutral bar,earth bar, single pole and neutral 240 volts, MCBs used as incommer Double door, flush to wall complete all as specified and directed .

Material and labour for Sub main wiring using two runs of single core PVC insulated cable(FRLS) 4 sqmm copper conductor multi stranded and one run of 4 sqmm copper conductor insulated cable (FRLS)using as earth wire drawn through and including suitable size non metallic rigid PVC conduit not less than 25mm dia with accessories including taking down old aluminium/Copper Sub main wirng complete all as specified and directed. Note- 3 run of 4 sq mm PVC copper wire and One run of PVC conduit shall be measured and paid as one unit.

Material and labour for Sub main wiring using two runs of single core PVC insulated cable (FR) 6 sqmm copper conductor multi stranded and one run of 6 sqmm copper conductor insulated cable (FR)using as earth wire drawn through and including suitable size non metallic rigid PVC conduit not less than 25mm dia with accessories including taking down old aluminium/Copper Sub main wirng complete all as specified and directed. Note- 3 run of 6 sq mm PVC copper wire and One run of PVC conduit shall be measured and paid as one unit.

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric cable, heavy duty, 1100 volt grade with stranded aluminium conductor cables of following sizes fixed in wall/ roof or laying in trenches etc., all as directed of 4 core 16 Sqmm complete all as specified and as directed. NOTE: Excavation, earth work shall be measured and paid for separately.

Supply,spreading and levelling clean dry sand in trenches all as specified for cable protection complete all as specified and as directed. Note: Punnned thickness shall be measured and paid.

Material and Labour for 40 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc including clamps, nut, bolt and washers etc after taking out unserviceable pipe complete all as specified and directed.

Supply & Fix in replacement of MCCB 63 Amps,4 pole, 415 Volt adjustable type with breaking capacity 16 KA, Ics=100%Icu, fixed properly at directed location and connecting/testing complete all as specified and directed.

Supply and Fix Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, TPN 4 way with 200 Amps rated copper bus bar double door protection, neutral bar,earth bar, single pole and neutral 415 volts, MCBs used as incommer Double door, flush to wall complete all as specified and as directed. NOTE: MCB shall be measured and paid separately.

Supply and lay unreinforced precast cable cover size 250X150X40 mm LV1 complete all as specified and as directed.

Supply, fixing, laying & testing galvanised iron water tubing of 40mm dia, medium grade, ISI marked with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. laid in trenches/floor complete all as specified and directed

Supply, fixing, laying & testing galvanised iron water tubing of 25mm dia, medium grade, ISI marked with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. laid in trenches/floor complete all as specified and directed

Supply and fix Gun-metal, globe or gate valves,with iron wheelhead, screwedboth ends for pipe and fixed 40mm bore complete all as specified and as directed.

Supply and fix Gun-metal, globe or gate valves,with iron wheelhead, screwedboth ends for pipe and fixed 25mm bore complete all as specified and as directed.

Material and Labour for valve chamber of internal size 900mm x900mmx900mm using 23 cm thick brick masnory wall in CM 1:4 including excavation, earth work in any strata & PCC 1:4:8 foundation type D-2, 100 mm thick including 20 mm thick PCC 1:2:4 type B1 coping & plastering the internal surface with 10 mm thick cement mortar 1:4 providing 2mm MS sheet chamber cover with "FH" embossed with opening arrangement lock system with 50x50x6mm angle iron frame duly painted with two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

SHAIJAL T M

K R JOSEPH AND SONS