Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.3 LAccepted-AOC | ₹1.3 L Quoted ₹4.4 L | 1 | Accepted-AOC Accept |
| 2 | 2₹4.5 L+₹7,161 (1.63%)Rejected-AOC VILL CHANDERYAR PO SADHOT TEHSIL DHARAMPUR DISTT MANDI H P | ₹4.5 L+₹7,161 (1.63%) | 2 | Rejected-AOC Reject |
| 3 | 3₹4.5 L+₹12,929 (2.93%)Rejected-AOC BANIKHET NAVEEN KUMAR BANIKHET CHAMBA HIMACHAL PRADESH 176303 | CHAMBA | HIMACHAL PRADESH | 176303 | ₹4.5 L+₹12,929 (2.93%) | 3 | Rejected-AOC Reject |
| Sl No | Description | Qty | Unit | Pankaj L2 | M/S Silicon Fusions L1 | Naveen Kumar L3 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in soil in hilly areas by mechanical means i/c cutting trimming of side slopes and disposing of excavation earth with in all leads and lifts as per direction and to the entire satisfaction of Engineer- in- charge up to leads and lifts. | 108.3 | Cum | 560 ₹60,648 | 550 ₹59,565 Lowest | 570 ₹61,731 |
| 2.00Laying, jointing and testing in trenches (to level or grade) of GMS pipes light class jointed with 1% flanged & 99% butt weld joints with of below diametre conforming to IS 1239-1990 (Part - I ) with latest upto date amendments of grade and wall thickness as specified below, suitable to withstand required hydraulic test pressure in randum length 4m-6m with plain ends and jointed with MS Flanges conforming to IS 6392-1971(Latest upto date amendments) and welding of flanges as per IS 816-1969 with electrodes as per IS 814-1991 including required number and size of MS nuts and bolts as per IS 1369-1967 and compressed asbestos fibre jointing gaskets sheet not less than 3.00 mm in thickness as per IS 2712-1998. The welding of flanges to be done on both faces (two layers outter side & one inner side) to make the joints leak proof (earth work, providing and welding M.S flanges and butt welded joints to be mearsured and paid separately) and to entire satisfaction of the Engineer-in-Charge.The laying of pipes conform to IS 5822-1994 and as per CPHEEO manual and will include all operations such as cutting, welding and jointing including flushing, cleaning and hydraulic testing complete in all respect. Excavation in trench, providing and welding of M.S. Flanges and butt welded joint shall be measured and paid for seperately . (Only carriage rate taken in analysis of rates whereas laying will be carried through departmental Labour and Pipe will be issued from JJM MAS) | ||||||
| 2.01 | 150 mm dia | 190 | Rmt | 615 ₹1,16,850 | 610 ₹1,15,900 Lowest | 628 ₹1,19,320 |
| 2.02 | 100 mm dia | 190 | Rmt | 560 ₹1,06,400 | 550 ₹1,04,500 Lowest | 568 ₹1,07,920 |
| 3.00Providing circumferencial Butt welded joints by electrical arc welding to following dia GMS Pipes welded in requisite number of weld runs including thread cutting so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes of 2.5mm to 6.3mm of Advani Oerlikon (Adore)- CITOJET/ESAB make, conforming to IS 814-1991, at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge. | ||||||
| 3.01 | 150 mm dia | 30 | Joints | 1,320 ₹39,600 | 1,300 ₹39,000 Lowest | 1,322 ₹39,660 |
| 3.02 | 100 mm dia | 30 | Joints | 1,140 ₹34,200 | 1,100 ₹33,000 Lowest | 1,148 ₹34,440 |
| 3.03 | 200 mm dia | 20 | Joints | 1,650 ₹33,000 | 1,600 ₹32,000 Lowest | 1,660 ₹33,200 |
| 4.00 | Hiring of the excavator cum loader for excavation of earth including wages of operator, fuel for it and maintenance of excavator as per the direction and to the entire satisfaction of the Engineer-in-Charge. (For lifting of pipes with beit during butt welding in trench and for terrafic clearance as well as diversion of Awahdevi Chowk) | 25 | Hours | 1,725 ₹43,125 | 1,710 ₹42,750 Lowest | 1,732 ₹43,300 |
| 5.00Providing and Supplying Copper alloy screwed and globe valves (Class-II) of following dia conforming to IS 778-1984 (Reaffirmed-2010) of UNIK make of (For bypass arrangement of Distribution main to Village Rangehar, Saroun, Tharu Tank, Institute line, Bandal Chowk, Thana, Old Kangoo ka Gehra and New Tank)in all leads and lifts to the entire satisfaction of Engineer-in-Charge. | ||||||
Tender Value
₹1.7 L
EMD Value
₹3,360
Closing Date
2 Sept 2025, 5:00 pmClosed
Executive Engineer
JS Division Dharampur Bharari
SDF 2025 81 Restoration of rain damages to LWSS Rakoh Cholthara Awahdevi and Tihra area in Tehsil Dharampur Distt. Mandi HP
2025_HPIPH_113150_1
5173-5222 dated 28-08-2025
Open Tender
Civil Works
Item Rate
90 days
Dharampur
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Executive Engineer
₹3,360
15 May 2026
28 Aug 2025
3 Sept 2025
28 Aug 2025
2 Sept 2025
28 Aug 2025
Amount
Excavation in soil in hilly areas by mechanical means i/c cutting trimming of side slopes and disposing of excavation earth with in all leads and lifts as per direction and to the entire satisfaction of Engineer- in- charge up to leads and lifts.
Laying, jointing and testing in trenches (to level or grade) of GMS pipes light class jointed with 1% flanged & 99% butt weld joints with of below diametre conforming to IS 1239-1990 (Part - I ) with latest upto date amendments of grade and wall thickness as specified below, suitable to withstand required hydraulic test pressure in randum length 4m-6m with plain ends and jointed with MS Flanges conforming to IS 6392-1971(Latest upto date amendments) and welding of flanges as per IS 816-1969 with electrodes as per IS 814-1991 including required number and size of MS nuts and bolts as per IS 1369-1967 and compressed asbestos fibre jointing gaskets sheet not less than 3.00 mm in thickness as per IS 2712-1998. The welding of flanges to be done on both faces (two layers outter side & one inner side) to make the joints leak proof (earth work, providing and welding M.S flanges and butt welded joints to be mearsured and paid separately) and to entire satisfaction of the Engineer-in-Charge.The laying of pipes conform to IS 5822-1994 and as per CPHEEO manual and will include all operations such as cutting, welding and jointing including flushing, cleaning and hydraulic testing complete in all respect. Excavation in trench, providing and welding of M.S. Flanges and butt welded joint shall be measured and paid for seperately . (Only carriage rate taken in analysis of rates whereas laying will be carried through departmental Labour and Pipe will be issued from JJM MAS)
150 mm dia
100 mm dia
Providing circumferencial Butt welded joints by electrical arc welding to following dia GMS Pipes welded in requisite number of weld runs including thread cutting so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes of 2.5mm to 6.3mm of Advani Oerlikon (Adore)- CITOJET/ESAB make, conforming to IS 814-1991, at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge.
150 mm dia
100 mm dia
200 mm dia
Hiring of the excavator cum loader for excavation of earth including wages of operator, fuel for it and maintenance of excavator as per the direction and to the entire satisfaction of the Engineer-in-Charge. (For lifting of pipes with beit during butt welding in trench and for terrafic clearance as well as diversion of Awahdevi Chowk)
Providing and Supplying Copper alloy screwed and globe valves (Class-II) of following dia conforming to IS 778-1984 (Reaffirmed-2010) of UNIK make of (For bypass arrangement of Distribution main to Village Rangehar, Saroun, Tharu Tank, Institute line, Bandal Chowk, Thana, Old Kangoo ka Gehra and New Tank)in all leads and lifts to the entire satisfaction of Engineer-in-Charge.
65 mm Dia
50 mm Dia
40 mm Dia
Pankaj (BID ID -549391)
Naveen Kumar (BID ID -549704)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.62 MB
BOQ_164977.xls
BOQ • 0.28 MB
Form6.pdf
Tender Documents • 0.83 MB
Form8.pdf
Tender Documents • 1.29 MB
TC.pdf
Tender Documents • 0.13 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .