SPECIAL REPAIRS TO SMQ (PHASE-I) AT AF STATION BARRACKPORE UNDER GE (AF) BARRACKPORE

Amount

Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete all as specified and directed .

Dismantling of plain or corrugated steel sheeting any guage thickness including nainital or similar pattern roof covering complete all as specified and directed.

Dismantling framed timber scantling 40 sq cm and over in section in any position complete all as specified and directed.

Dismantling filters rails, post, rafters , purlins etc under 40sqcm in section framed work complete all as specified and directed.

Dismantling ceiling boards of any description fixed in any position complete all as specified and directed .

Demolition of brick work built in CM including all quoins, arches, pillars etc. complete all as specified and directed .

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for including removal of debris in low laying area of defence land complete all as specified and directed .

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for including removal of debris in low laying area of defence land as specified and directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.

Dismantling of Stone slabs laid bedded and pointed in any mortar stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed .

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n. exc. 1.5 Sq. M each, complete all as specified and directed .

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 sqm each and removing outside MOD land, complete all as specified and directed .

Taking up or down, steel tubing 15 mm bore, and connection including cleaning for re-fixing or removal from site of work complete all as specified and directed .

Taking up or down, steel tubing 20 mm bore, and connection including cleaning for re-fixing or removal from site of work complete all as specified and directed.

Taking down cement plaster of any description from brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed .

S&F of roof trusses (framed) trussed purlins, crane gantries, rails and fastering and heavy bracket framming (beem, tee, angle, channel or flat section) including distance pieces, cleats etc confirming gde Fe-410 W (grade E250) quality 'A' complete all as specified and directed .

Material and Labour for pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of colour as approved by GE, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws. Its minimum metallic coating mass is AZ150 (150g/sqm), with super durable Polyster Exterior paint system, total 25um DFT on topside and 10um DFT on reverse side complying with AS/NZS 2728- Type 4 or IS 15965-class 3, complete all as specified and directed.Make(Tata bluescope/Sexena Marine Tech )

All as per item no-18 here in before but except galvalume sheet (any thickness) complete all as specified and directed .

Material and Labour for pre-painted, galvalume aluminium zinc coating GI based plain steel sheet, 0.45 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws. Its minimum metallic coating mass is AZ150 (150g/sqm), with super durable Polyster Exterior paint system, total 25um DFT on topside and 10um DFT on reverse side complying with AS/NZS 2728- Type 4 or IS 15965-class 3,complete all as specified and directed .(Tata bluescope/Sexena Marine Tech )

S&F MS plates/base plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed

M&L for PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in coping, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work if required complete all as specified and directed.

M&L for 4 mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber GI/Aluminium frame work with screws complete all as specified and directed.

Fixing only old serviceable non asbestos ceiling board 4mm thick obtained from DI item no. 04 complete all as specified and directed.

S&F Anodised aluminium snap grid 605mm x 605 mm frame work for false ceiling complete all as specified and directed.

M&L for brick work with old size sub class B bricks straight or curved on plan exc 6 m mean radius build in cement mortar (1:6) complete all as specified and directed

All as per item No-26 above but except brick complete all as specified and directed.

M&L for 15mm thick cement plaster in cement mortar (1:4) on fair faces of brickwork or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 12 mm thick on fair face of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of oil bound distemper over alkali resistant primer on newly plastered surfaces including preparation of surfaces complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & Fungal resistance dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 ltr/sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm over new surfaces complete all as specified and directed.

M&L framed work as in doors or gates of angles or other section with gusset plate, rails or braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks or steel hanging door fittings (exclusive steel sheeting or other covering running rails and guides) and hanging also fastening and fixing complete(Fe 410 Gde E-250 quality A) complete all as specified and directed.

Mild steel plain black sheet 1mm thick but in hearth covering to door shutters, covering to door frames chulla hoods water tanks, water thoughts ducts, urinal troughts, and funnels etc cut to size edges beaded if directed holes punched including round headed screws clouts nails or rivets and fixed to wood or steel members etc with plain 40 mm lap joints or welded/riveated seams including bending turning up mitred angles stopped ends outlets etc required complete all as specified and directed.

S&F steel wire fabric welded not exc 4 Kg per sqm complete to wood or steel members complete all as specified and directed.

S&F of solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specificaiton and drawing given on MES schedule Part-II (2020) complete all as specified and directed.

S&F factory made PVC door shutters 30 mm thick (Style) consisting of frame made of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed.

Providing factory made door frame 125 x 100x 60 mm double rebate made with solid PVC frame profile with homogeneous fine cellular structure having smooth with & 60 mm thickness and shall be fixed to the wall as per insturctions of Engineer-in-Charge complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

S&F framed work such as grills, gratings, etc with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars, barred iron door, ladders framed balusters, walk ways, railings, frame work of water tanks and similar work con-forming to Fe-290 Gde E-165 complete all as specified and directed.

S&F factory made solid PVC moulded s shutter with particle board core 28 to 30 mm thick (stiles) with 2.4 or 6 raised panel design with 2 mm thick moulded on the PVC sheet on the front face & 2 mm plain colour PVC sheet on back face supplying & fixing in frame at site as per specification & drawing (Door step solution, Rajshree plastiwood) complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be converted with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing but except wire gauged doors complete all as specified and directed.

M&L framed second class hardwood ledged braced and battened shutters supplied and fitted to chowkat except timber any thickness complete all as specified and directed.

S&F IInd class hard wood small items such as breackets n.exc 200 mm, latch and hinge blocks, shapped door and window stops and the like including all nex labours articles n exc 200 cucm each complete all as specified and directed.

S&F MS Butt hinges medium weight cold rolled 100mm size complete all as specified and directed.

S&F aluminium handles, caste type, anodised 150mm long complete all as specified and directed.

S&F aluminium handles, caste type, anodised 100mm long complete all as specified and directed.

S&F for 2nd class HW plain fillets, square, rectangular or triangular in section, wrought, chamfered or rounded screwed with nails or brads exc 13 & n.exc 25 Sqcm complete all as specified and directed.

Taking down wooden window/door carefully and refixed in same opening after necessary repair supply an fixed any require item such as stay handle etc painting and making good to existing surface with CM1:3. Note:- hold fast concrete etc will be measured and paid separately complete all as specified and directed.

S&F in repair 20 mm dia Harrison rails, colour coated anodised aluminium alloy with fixing brackets stops and rollers etc complete all as specified and directed.

M&L 18/19 mm thick prelaminated particle board exterior grade prelaminated both side with decorative choice lamination fixed to frame with leaping with shutters, shelves cup board cabinets etc. Fix in repair complete all as specified and directed.

Hacking out old brocken glass (any thickenss, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality with oil putty in square n exc 0.5 m in each plane complete all as specified and directed.

S&F 4 mm thick sheet glass pin headed type and glazing with oil putty in square n exc 0.5 m in each plane complete all as specified and directed.

S&F in repair for Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with stainless steel wire staples fixed with wooden/steel frames complete all as specified and directed .

M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate ) of any thickness slabs supported on walls beams and column in floor roofs, landings balconies, canopies, deck slabs and in shelves complete all as specified and directed.

M&L form work to sides and soffits of floor or roof beam, beam haunching girders, bressumers, lintels , cantilevers, shelves includiong supports overhangings also splayed between floors and beams complete all as specified and directed.

S&F for sinks with draining board made of Stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm and bowl size 410mm x 330mm x 160mm as in repair complete all as specified and directed.

S&F for stainless steel plate rack of size 750 mm x 600 mm x 250 mm as approved by GE (Make Prayag or Equivalent) complete all as specified and directed.

M&L non-skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed layer of mortar 20 mm thick in cm 1:6 complete all as specified and as specified and as directed.

M&L non-skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,on vertical surfaces as dado/skirting and risers to steps including 15mm thick rendering cement plaster on fair faces of brick work or concrete surfaces CM 1:4 complete all as specified and as directed

M&L glazed coloured ceramic tiles 300 x 200 x 7 mm thick on work on vertical surfaces such as dados/skirting and risers to steps set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick bedding/backing layer in CM 1:3 complete all as specified and as directed.

M&L 20 mm thick Black Marble (Black Zebra Kishangarh) machine cut, in skriting/dado laid over cement screed and jointed with grey cement slurry including cutting and polishing types including screed bed layer of mortar 20 mm thick in cm 1:6 complete all as specified and as directed.

Rounding to edges of stone slabs one edge such as in steps and other similar situation complete all as specified and directed.

M&L cement concrete 1:2:4 type B-1 (using 12.5 mm graded stone aggregate) 25 mm thick in floor finishes complete all as specified and directed.

S&F for 20 mm GI tubes (mudium grade) with all fitting and fixed complete to walls and ceillings or laid in floor after taking up or down steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F for 15 mm GI tubes (mudium grade) with all fitting and fixed complete to walls and ceillings or laid in floor after taking up or down steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in CM 1:3 in brick wall for concealed water tubing, cuttings not exc 10 cm girth complete all as specified and directed.

S&F in repair 15 mm stop valves, cast copper alloy, fancy type screwed down high pressure with crutch or butterfly handle screwed both, ends for iron pipe or for unions and fixed but fancy chromium plated (concealed type) with long shank & cup complete all as specified and directed.

S&F in repair 15 mm bore bid taps fancy type cast copper alloy chromium plated with crutch or handles screwed down, screwed for iron pipes as fixed complete all as specified and directed.

S&F in repair 15 mm bore angle cock fancy type cast copper alloy chromium plated with crutch or handles screwed down, screwed for iron pipes as fixed complete all as specified and directed.

S&F for 15mm bore PVC connection pipe 450 mm/600mm long with PTMT nuts at both ends complete all as specified and directed.

S&F in repair swivel shower of PTMT any colour for fixing with 15 mm pipe (Minimum weight 40 gms) complete all as specified and directed.

M&L in repair 15 mm pillar taps cast copper alloy chromium plated, fancy type screwed down high pressure as fixed in repairs complete all as specified and directed.

S&F for 125 mm dia grating doom of PTMT ( minium weight 40 gms) as in repair complete all as specified and directed.

S&F for 10 Ltr capacity PVC valve less syphonic action type flushing cistern, low level with inlet, ball valve, float all as specified including necessary flush pipe as directed as in repair complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flusing cistern and flush pipe) including connection to drain (or out going pipe) and to flush pipe anti syphonage pipe incl cast iron P or S trap complete all as specified and directed.

S&F Plastic water closet seat black closed pattern with flat bottom and cover mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair vitreous china wash basin white flat back size 550 x 400 mm including cutting for and pinning in ends of brackets or erectting stand including waste fittings, brass, chromium plated for glazed ware sinks, basin with long screws shanks and fly nuts flange end bedded in red lead cement and other end fixed

S&F for 500 Ltr capacity rotational moulded polythene water storage tanks (cylindrical /vertical with closed top) of multi-layer ISI marked hoisted and fixed in position all as specified in SSR Part-I after dismantling of old water tank and removing to outside defence area complete all as specified and directed.

S&F in repair for PTMT ball valves high pressure with epoxy coated aluminium rod and high density plastic ball screwed for 15mm/20mm bore complete all as specified and directed.

S&F in repair of 20 mm dia brass chromium plated tubular towel rail 'D' type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed

S&F cast iron floor trap with grating including jointing to waste pipe in run lead for 75 mm bore including CP grating cover with or without hole complete all as specified and directed.

Taking down existing AC/PVC pipes (any size or patern) including all fittings complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints etc fixed to walls or laid in floors as in repair complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints etc fixed to walls or laid in floors as in repair except PVC pipes complete all as specified and directed.

S&F for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints etc fixed to walls or laid in floors as in repair complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed.

S&F for 75 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C2 using 40 mm graded stone aggregate as in plinth protection paved area filling and complete all as specified and directed.

M&L for one coat of acrylic base exterior paint on old plastered surface including preparation of surface complete all as specified and directed .

M&L for one coat of synthetic enamel paint after preparation of old painted wooden surfaces over 10 cm width or girth not otherwise described of any description complete all as specified and directed .

M&L preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer over 10 cm width or girth not otherwise described complete all as specified and directed .

M&L for one coat of synthetic enamel paint after preparation of old painted wooden surfaces over 10 cm width or girth of any description complete all as specified and directed .

Taking up or down including refixing machine pressed precase cement concrete interlocking paver blocks any shape and size and refixing the same over new sand layer over 50 mm thick and over compacted sand cushioning and making good completed all as specified and directed. (Note: Rate of sand cushioning deemed to be included in this item)

M&L for 100mm thick PCC (1:2:4) type B2 using 40 mm graded aggregate as in cement concrete hardstanding and pavement complete all as specified and directed .

M&L for anti-skid outdoor pavement tiles of size 300 mm x 300 mm x 10 mm thick, coloured, set, jointed and pointed in neat cement slurry with grey cement & pigment as in floor, path etc over & including 15mm thick screed bed in cement mortar (1:4) completed all as specified and directed.

Taking down carefully any type point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing ( Except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified and directed .

M&L for light/fan point wiring (concealed type) with single core PVC insulated unsheathed stranded FRLS copper cable of 1100 volts grade size 1.5 sqmm (nominal area) in and including heavy duty rigid non metalic PVC conduit and conduit accessories including 1.2mm thick pressed steel terminal box in recess to existing wall surface with 3mm thick bakelite sheet top cover(ISI marked) fixed with chromium plated brass screws and cap washers for housing switches, sockets and regulators with all fittings and fixing materials with one single core PVC insulated unsheathed 1.5 sqmm (nominal area) stranded copper conductor as earth continuity wire and connected to earth dolly complete all as specified and directed..

All as per item No. 1 here-in-before but for Bell/Buzzer point controlled by one push button on independent board complete all as specified and directed.

All as per item No. 1 here-in-before but for one five pins 5 Amps switch socket outlet point on independent board complete all as specified and directed.

All as per item No. 1 here-in-before but for one five pins 5 Amps socket outlet point on same board complete all as specified and directed.

All as per item No. 1 here-in-before but for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

S & F switch piano flush type one way 5/6 amps 240 volts, single pole complete all as specified and directed.

S & F flush type Bell push AC, 50 Hz, 230 Volts, 5 amps complete all as specified and directed .

S & F Bell Ding Dong AC, 230 Volts, Single pole complete all as specified and directed .

S & F Switch socket combination 2 in 1, 5 pin , 5 amps flush type complete all as specified and directed .

S & F for socket outlet 2 in 1, 3 pin 5 Amp flush type complete all as specified and directed .

S&F only Switch socket combination 2 in 1 , 3 pin, 6 and 16 Amps socket complete all as specified and directed .

M & L for Ceiling rose, 3 terminals/phase type, fabricated of PVC/Polycarbonate, isolated body complete all as specified and directed.

M & L lamp holder , PVC/Polycarbonate type with black plate suitable for batten fittings complete all as specified and directed. Make : Anchor/SSK/CONA

M&L for Delux stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc all as specified and directed.

M&L for submain wiring comprising single core , 2 Runs of 6 sqmm nominal cross sectional area,FRLS multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. in PVC casing capping/ conduit and its fittings complete surface/concealed including provision of 1X6.0 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire complete incl taking down old UNSV sub main complete all as specified and directed . ( Note :-1. Extra length of cables/ wire required for connection to MCBs/DB's shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly 2. Cuttings /chasing of wall etc and making good the disturbed surface shall be measured and paid separately)

M & L cutting chases, chipping in, making god to facings where reuired and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc ; and cutting chases for concealed water tubing or concealed wiring etc, and making good, cutting not exc 10 cm girth in brick walls complete all as directed .

S & F sheet metal enclosure TPN DB 4 ways double door having facility to fix MCCB in incomer and MCBs in outgoing, IP 43 with metal door type complete fitted with bus bars, neutral links, blanking plates etc. including taking down old one and making good disturbed surfaces complete all as specified and directed. Make : legrand cat No.507895 or equivalent make of ABB/Havells.

S&F sheet metal enclosure SPN DB 8 ways double door having facility to fix MCB in incomer and MCBs in outgoing, metal door IP-43 type complete fitted with bus bars, neutral links, blanking plates including taking down old one and making good disturbed surfaces complete all as specified and directed.

S & F MCCBs 160 Amps current capacity, 415V, 36 KA, 4 Pole , adjustable thermal magnetic type, complete including taking down old existing unserviceable all as directed by Engr-in-charge.

S&F in repair MCB SPN, 240 Volts, of 40 to 63 amps current rating, complete including taking down old UNSV complete all as specified and directed .

S & F MCB SP, 240 Volts, of 6 to 32 amps current rating, 10 KA breaking capacity Ç'series complete including taking down old UNSV complete all as specified and directed ..

S & F Energy efficient tube light fitting with LED batten type luminaire, extruded aluminium body with completely pre wired with driver internally fixed and decorative caps , 08W/10W, 230V , with connector blok, etc., complete with all accessories and connecting up with suitable size, 1.5 sqmm three core copper conductor flexible wire , screws , gutties etc.and removing the UNSV fitting and complete all as specified and directed . Make- Crompton-LDL-10-WW or equivalent model of Jaquar/ Philips/Havells

M&L for the remove the existing 36/40W tube light fitting and fixing the Energy efficient LED tube rod 20 W , 230V , and necessary internally pre-wired with suitable size copper flexible wire and remove the UNSV choke and starter and including connecting up with suitable size, 1.5 sqmm three core copper conductor flexible wire , screws , gutties etc. complete all as specified and directed . Make- Crompton-LDL-20-CDL or equivalent model of Jaquar/ Philips/Havells

S&F street light bracket fabricated out of GI Tubing light grade 40 mm bore Bend to the shape as directed and of length 1.5 mtr complete with mounting MS clamp of flat iron size 40X5mm of suitable length 02 pairs incl nut bolts etc of suitable size, including taking down old corroded one all as specified and directed.

S&F 25 Watt to 35 Watt LED street light luminaries IP65/66 with low wattage with pressure die cast aluminium housing, with heat resistant toughened glass including taking down old unserviceable light fittings complete all specified and directed ,

Removal of UNSV Ceiling fan , Supply & fix Ceiling fans complete with electronic type regulator and accessories 230V , 1200mm sweep. BEE 5 star rated complete all as specified and directed by Engr-in-chrg. Make : Havells ES NEO or equivalent model of USHA/CG.

Removal of UNSV Exhaust fan, Supply & Fix Exhaust fans AC single phase 230/240V of size 300mm sweep with louver complete all as specified and directed by Engr-in-chrg. Make : Havells Turbo Force SP or equivalent model of USHA/CG.

M&L for earthing complete with galvanized steel earth plate electrode 60x60cmx6mm thick buried directly in ground (earth pit not less than 2.5 Mtrs deep below normal ground with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nut, check nuts and washer of galvanized iron or steel, protected by galvanised iron pipe 40 mm dia medium grade all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x 10 cm thick reincorced with 8 mm dia TMT bars @ 15 cm cement concrete both ways with 10 mm dia mild stel round bar of 20 mm bore galvanised iron pipe medium grade for watering, charcoal or coke and salt in alternate layers with necessay earth work in soft/loose soil complete all as shown in electrical plate No 5 connected to earthing test point all as specified including testing on completion complete all as specified and directed .

Removal of UNSV Meter cover, S & F Thermoplastic Polystyrene of IP 65, single phase, metering cover wall mounted of size 217x253x115mm with transparent glass and necessary fixing nut , bolts and clamp for installations of single phase energy meters . Quoted rate includes connections of respective energy meters at specific locations complete all as specified and directed.Make- Hensel of RAL 7035

MS SHRI B.C. DAS

TAPAS ENGINEERING CO

BHAUMIK CONSTRUCTION