Repairing of Consumer Forum Office Building at Valsad, Dist: Valsad. (Repairing Outside Polymer plaster Toilet repairing Door-Window Colour work Paver Block Parking Shed Work and other Misc.work)

Name of work :-

Repairing of Consumer Forum Office Building at Valsad, Dist: Valsad. (Repairing Outside Polymer

plaster, Toilet repairing, Door-Window, Colour work, Paver Block, Parking Shed Work and other

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

m Item of work Quantity Unit Amount

1 Dismentaling tiled of stone floors laid in mortar including stacking of 163.00 Sqmt 48.21

serviceable materilas and disposal of unserviceable materials with all

2 Demolition and disposal of unserviceable materials with all lead and 26.60 Cumt 609.26

lift.(i) Cement concrete.

3 Excavation for foundation upto 1.50 mt depth including Sorting out 5.30 Cumt 117.08

and stacking of useful materials and disposing the excavated stuff

all lead & lift (A) Loose or soft soil.

4 Dismantling santtary fittings like wash basin, W.C.Pan Indian and 14.00 Nos. 405.65

European type, flushing tank etc. including stacking the materials with

all lead and lift.

5 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with 290.00 Rmt. 75.08

fittings and clamps including stacking the materials with all lead and

lift ( for any dia, of pipe)

6 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 11.00 Nos. 187.71

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding

7 Dismentaling of sheet roofing including ridges, Hips,Valleys, Gutters 99.40 Sqmt 48.21

etc. stacking of serviceable materilas and disposal of unserviceable

materials with all lead and lift.(i) G.I.sheet roofing.

8 Dismentling steel work including distempering and stacking the 1806.00 Kg 3.67

materials with all lead and lift.

9 Removing the scrapping of old detoriated plaster of any thickness 768.00 Sqmt 19.57

from wall/Rcc member including stacking of servicable material and

disposal of unservicable material from site of work with all lead and

10 Providing and laying water proofing treatment by conventional 264.00 Sqmt 945.36

method including cleaning the slab surface by wire brush as directed

including provding first layer of C.M. 1:4 of 40 mm thickness mixed

with water proofing compound at rate prescribed by manufacturer,

including putting of brick bats of average thickness 40 mm Well

immerssed in water laid uniformly on first layer of mortar including

applying cement slurry @ rate of 0.08 bag/sqm. on fixed layer of brick

bats including maintaining necessary slope, in second layer 40 mm

thick C.M 1:4 mixed with water proofing compound as directed,

including finishing smooth with cement slurry as directed complete.

11 Providing And filling with good quality sinder(steam coal) as directed 10.00 Cumt 454.50

by engineer in charge in sunks in layers of 15 cm thick,including

watering,placing ,ramming well etc as directed, for all floor.

12 Providing 20 mm thick Water proof cement plaster for sunk in single 23.00 Sqmt 289.87

coat on brick / conctrete wall for interor plastering up to floor two

level finished even and smooth (ii) cement mortar 1:3 (1- cement,

sand) and mixing waterproofing materials of approved brand and

manufacture in cement mortar in proportion recommended by the

manufacture for All floor.

13 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse 46.00 Cumt 3683.34

sand : 4- graded stone aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in (A) Foundation and Plinth

14 Providing and laying water proofing treatment with broken chine 232.00 Sqmt 747.29

mosaic flooring for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to plain or slope and to

be tempered to bring mortar creme out upto surface using white

cement including rounding off junctions and extending them upto

cm along the wall, clearing with water and oxalic acid etc. as directed.

15 P & L 30x30 cm. Matt Finished Ceramic Tiles 6 mm thick in flooring 32.00 Sqmt 970.07

treads of steps and landing laid on a bed of 12 mm thick cement

mortar 1:3(1-cement:3-coarse sand)finishing with flush pointing in

colour cement slurry etc. complete. Colour and Shade approved by

Engineer-In-Charge

16 Providing and laying coloured glazed tiles of the size 300 mm x 200 131.00 Sqmt 1441.22

mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and

dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) &

jointed with white cement slurry.

17 Providing erecting and fixing double coated Syntex PVC. (ISI) water 5000.00 Lit 3.95

tank of required capacity each with all necessary fittings and

connection etc. complete on terrace.

18 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 30.00 Rmt. 72.65

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost

of all materials.

19 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 30.00 Rmt. 91.84

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost

of all materials.

20 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. 80.00 Rmt. 148.12

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost of

21 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. 50.00 Rmt. 195.67

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

22 Providing and fixing concealed center point to wall ceiling & floor 30.00 Rmt. 166.86

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal

for potable water of following dia. nominal bore tube fittings and

clamps including making good the wall, ceiling and floor etc.

complete.[A] 15 mm.

23 Providing and fixing concealed center point to wall ceiling & floor 30.00 Rmt. 249.72

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal

for potable water of following dia. nominal bore tube fittings and

clamps including making good the wall, ceiling and floor etc. complete.

24 Providing and fixing concealed center point to wall ceiling & floor 75.00 Rmt. 442.04

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal

for potable water of following dia. nominal bore tube fittings and

clamps including making good the wall, ceiling and floor etc. complete.

25 Providing and fixing ball cock of approved. quality as directed.(A) 2.00 Nos 189.84

Copper Metal (ii) 50mm dia.

26 Providing, laying and jointing in true line and level 160 diametre 120.00 Rmt. 831.22

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and

other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 160 mm diametre x

mm length x 196 mm heigh at every 2000 mm center to center or shall

be concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

27 Providing laying (to level or slopes) and jointing reinforced concrete 100.00 Rmt. 665.48

Light duty non-pressure pipes I.S. class NP2 of the following internal

diameter with collars and butt ends prepared for collar joints including

testing of joints complete.(D) 300mm

28 Providing, laying and jointing in true line and level 75 mm dia. UPVC 50.00 Rmt. 698.92

SWRType B pipe conforming to IS 13592-1992 with one end plain and

other end socketed with rubbering and fitting conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp at every 2000 mm c/c or shall be conceled in

walss as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

29 Providing, laying and jointing in true line and level 110 diametre 50.00 Rmt. 836.73

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and

other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 110 mm diametre x

mm length x 145 mm heigh at every 2000 mm center to center or shall

be concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

30 Providing and fixing in PVC SWR cowel went 75mm dia to pipes.(B) 3.00 Nos 15.66

31 Providing and fixing in PVC SWR cowel went 110mm dia to pipes.(B) 3.00 Nos 28.79

32 Providing and fixing MS Z clamp on Wall or celling for Pipe Fitting 233.00 Nos 70.70

including all type necessary fittings and accessories etc. completed as

per directed engineer in charge.

33 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 18.00 Nos 571.08

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.

34 Providing and fixing screw down bib taps of following size.(B) Brass 10.00 Nos. 186.83

chromium plated screws down Bib Tap. (i) 15mm dia.

35 Providing and fixing brass screw down stop tap.(A) 15mm dia. 12.00 Nos 205.83

36 Providing and fixing pillar tap, capstan head, screw down high 8.00 Nos 308.73

pressure with screws, shanks and back nuts. (i) 15mm dia.

37 Providing and fixing wsh down water closet (European type, W.C. Pan) 3.00 Nos 1303.71

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately (A) vitreous China Pattern :(i) in

38 Providing and fixing 12.5 Litres low level flushing cistern with a pair, of 3.00 Nos 2344.42

C.I. or Mild brackets, complete with fittings such as lead valve less

syphon, 15mm nom.nal size brass ball valve with polythene float, C.P

brass handle unions and couplings for connections, with inlet, outlet

and overflow pipes, 40mm dia. porcelain enamelled flush bend

including cutting holes in walls and making good the same connecting

the flush bend with cistern and

closet (overflow pipe to be measured and paid for separately)(A)

Vitreous China (I) In white colour

39 Providing and fixing plastic seat and cover for wash down water closer 3.00 Nos 291.33

with C.P. brass hinges and rubber buffers. (B) Plastic seal and cover.

40 Provision and fixing water closet squatting orissa type W.C. pan size 4.00 Nos 1607.92

580mm integral footrest and 100 mm P or S trap and in cluding 25 mm

dia CP brass flush valve and GI inlet connection etc. comp. (A) Vitreous

china long pattern white or colour

41 Providing and fixing chromium plated brass half trun flush cock of 7.00 Nos 263.77

approved quality including fixing in pipe line etc. complete.(ii) 25mm

42 Providing and fixing Jet spray heavy duty with S.S. Braided hose 60 cm 3.00 Nos 414.10

long with wall hook and other accessories etc. completed

43 Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan 7.00 Nos 38.99

44 Providing and fixing wash basin with single hole for pillar tap with C.I. 7.00 Nos 1961.83

Or M.S. brackers painted white including cutting holes and making

good the same including pillar tap, Brass waste, stop cack , bottle

trap and M I fisher union fittings :(ii) Flat back wash basin 500mm x

400mm size including all necessary fittings etc complete shade and

pattern as approved by Engineer in charge.

45 Providing and fixing Urinal or approved quality including conecting the 4.00 Nos 1036.27

Urinal with waste pipe, tap etc. complete.(A) White earthenware flat

back or corner type size 430mm x 260mm x 350mm.

46 Providing and fixing S.W. gully trap with C.I. grating brick masonry 2.00 Nos 1246.92

chamber and water tight C.I. cover with frame of 300mm x 300mm

size (inside) with standard weight (i) Square mouth traps (B) 150mm x

100mm size P or R type

47 Constructing brick masonry chamber for underground C.I. Inspection 4.00 Nos 3208.77

chamber and bends with briocks having croshing strength not less

than 35Kg. Cm2 in C.M. 1:5 precast RCC cover 455mm x 610mm

intenal dimensions with frame (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete (i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line.

48 Constructing brick masonry chamber for underground C.I. Inspection 4.00 Nos 3916.78

chamber and bends with briocks having croshing strength not less

than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C.

top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc. complete.(i) Inside

dimensions 500mmx 700mm and 450mm deep for single pipe line.

49 Extra over items for every additional depth of 0.1M. of part thereof 4.00 Nos 242.39

beyond 450mm depth for Brick masonry chamber.(i) for 455mm x

50 Extra over items for every additional depth of 0.1M. of part thereof 4.00 Nos 264.86

beyond 450mm depth for Brick masonry chamber.(i) for 500mm x

51 Providing 20 mm thick double coat mala cement plaster on interior 184.00 Sqmt 272.48

brick / concrete work for plastering comprising of base coat of 12 mm

thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in

rough finishing and 8 mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with trovel including scaffolding

curing etc. complete. For Ground floor

52 Providing 20 mm thick double coat mala cement plaster on interior 163.00 Sqmt 299.20

brick / concrete work for plastering comprising of base coat of 12 mm

thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in

rough finishing and 8 mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with trovel including scaffolding

curing etc. complete.For first floor

53 Providing 20 mm thick double coat mala cement plaster on interior 35.00 Sqmt 325.93

brick / concrete work for plastering comprising of base coat of 12 mm

thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in

rough finishing and 8 mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with trovel including scaffolding

curing etc. complete. For second floor

54 Providing 10 mm. Thick cement plaster in single coat for plastering on 41.00 Sqmt 140.95

ceiling and soffits of stairs and finished even and smooth in : (I)

Cement mortar 1:4 (1 cement : 4 sand) etc. complete.For .Ground

55 Providing 10 mm. Thick cement plaster in single coat for plastering on 40.00 Sqmt 164.34

ceiling and soffits of stairs and finished even and smooth in : (I)

Cement mortar 1:4 (1 cement : 4 sand) etc. complete.For First Floor

56 Providing 10 mm. Thick cement plaster in single coat for plastering on 23.00 Sqmt 187.73

ceiling and soffits of stairs and finished even and smooth in : (I)

Cement mortar 1:4 (1 cement : 4 sand) etc. complete.For second Floor

57 Providing average 20 mm thick single coat polymer plaster by 282.00 Sqmt 402.99

removing detoriated plaster over RCC member, like column, beam,

slab etc. exposing existing reinforcement including scraping by wire

brush, applying rust removing chemical, rust convertor and zinc rich

primer on existing reinforcement, applying polymer bonding agent on

existing concrete surface including plastering in CM 1: 3 in single coat

including standard quality (Dr, fixit or any equivalent brand) curing

compound agent and finishing with floating coat of neat cement slurry

adding Polyalk Fix Prime polymer chemical as per directed by Engineer

- in - charge for all floors.

58 Painting Two coats (excluding priming coat) on previously painted 63.00 Sqmt 94.82

steel and other metal surface with enamel paint, brushing to give an

even shade including cleaning the surface of all dirt, dust and other

foreign matter.

59 Removing dry or oil bound distemper by a washing and scraping and 1514.00 Sqmt 11.30

sand papering the wall surface smooth including necessary repairs to

scratches complete.

60 Removing dry or oil bound distemper by a washing and scraping and 1372.00 Sqmt 12.90

sand papering the Ceiling and sloping surface smooth including

necessary repairs to scratches complete.

61 Applying two coats of putty & two coats of primer of approved brand 2886.00 Sqmt 40.59

and manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

62 Wall painting (two coats) with plastic emulsion paint of approved 1514.00 Sqmt 120.87

brand and manufacture on undecorated wall surface to give an even

shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

63 Wall painting (two coats) with plastic emulsion paint of approved 1372.00 Sqmt 126.55

brand and manufacture on undecorated ceiling surface to give an even

shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

64 Wall Painting (Two coats) with weather proof acraylic emulsion (Apex 1756.50 Sqmt 114.53

or equivalent type) paint of approved brand and manufacture and of

required shade on exterior wall surface to give an even shade over and

including primery coat with Alkaly resistance primer of approved

brand after thoroughly brushing surface to remove all dust and

remains of loose powdered material etc. copm. for all height

65 Removing, Repairing and Refixing Old existing wooden door shutter 6.00 No 1808.91

including repairing the shutter/frame using Randha machine and

replacing old fixture and fastening with new SS 304 grade fixtures like

3 Hinges, 1 Stoppers, 1 Aldrop , 2 Handle & 1 lock etc. and as directed

by engineer in charge etc comp.

66 Removing, Repairing and Refixing Old existing Main wooden door 1.00 No 5158.07

shutter including repairing the shutter/frame using Randha machine

and replacing old fixture and fastening with new SS 304 grade

fixtures like 6 Hinges, 2 Stoppers, 1 Aldrop , 2 Nos. 30cm Handle &

lock etc. and as directed by engineer in charge etc comp.

67 Removing, Repairing and Refixing existing Alluminium window frame 8.00 No 580.75

with glass of all size shutter/frame, replacing all old fixtures with new

locks, screws etc. including repairing the shutter/frame with Rates

includes all labour charges for removing, repairing & refixing the

window, all materials, transport cost, taxes etc.and as directed by

engineer in charge etc complete.

68 Removing, Repairing and Refixing existing Alluminium fix ventilation 4.00 No 439.35

frame with glass of all size shutter/frame, replacing all old Mosquite

Net , fixtures & New Mosquite Net with new locks, screws etc.

including repairing the shutter/frame with Rates includes all labour

charges for removing, repairing & refixing the Ventilation, all

materials, transport cost, taxes etc.and as directed by engineer in

charge etc complete.

69 Providing and fixing 35 mm thick flush door Double shutter, solid core 3.00 Sqmt 3350.17

with Shutter of Factory made & Stamped I.S 12823 Grade one ,Type

one ,melamine faced three layred resin Flushed Door Having

Decorative Lamination on both sides & 12 mm T.W.Beading Around

the Door,FROM HOLDING LICENCE FOR MINIMUM 5 YEARS .and

stainless steel handle and necessary Locking system of Godrej, zinc

coated hinges ,fixtures & fastenings etc directed by engineer in charge.

70 Providing and fixing FRP frame size 100 x 50 mm and 35 mm thick FRP 18.00 Sqmt 2547.22

depress panel Single shutter having extra reinforcement on sides &

edges in Gel coat finish.The core of the shutter & frame is to be filed

up with injected fire retradat grade polyurethene foam done in situ

along with embeded wooden pieces for stiffening & also taking hinges

& fintures.The whole FRP frame & shutter is to be waterproof,

weatherproof ,termite proof & resistance to mild acid/alkali.Rates are

to be inclusive of S.S hinges with necessary screws & alluminum

fixtures & fastenings & fartener sleeve.Colour and Shade approved by

Engineer-In-Charge. D4,D5

71 Providing and fixing polished 18 mm thick Granite stone in Single piece 23.00 Sqmt 2379.56

with full round edge and polished of approved quality in clading on Cill

& Jambs and around the doors/ windows/ ventilation with 12 mm

thick cement motor CM (1:4) and fixing with cement slurry & adhesive

including moulding of exposed edges as directed by engineering in

charge etc. complete.

72 Providing and fixing of Ridge flashing for roof panel shall be made out 122.00 Sqmt 858.67

of 0.5 mm thick pre coated GI sheet . The Precoated sheet shall be of

minimum 240 mpa steel grade confirming to IS 14246:1995 and shall

have zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7

microns epoxy primer on both side of the sheet and polyester top coat

15-18 micron. The PPGI Sheet shall have plastic protective guard film

of minimum 25 microns to avoid scratches during transportation. The

ridge shall be fixed to the steel members by pop rivet or self

drilling/self stitching fastners @ maximum 450 mm c/c along length of

capping/flashing etc complete .

73 Steel work, welded in built up sections framed work including cutting, 4880.00 Kg 90.48

hoisting, fixing in position and applying a priming coat of read lead

paint & two coat oil paint. (A)In beams and joists, channels angles

Tees, flats, with connecting plates or angle cleats as in main and cross

beams. Hip and jack rafters, purlins conneted to common rafters and

74 Providing and fixing MS Ladder of required pattern with MS 300.00 Kg 108.07

flats(30x3mm) or round or square bars (12mm) at required spacing &

with round headed bolts and nuts or screws or welding including

primer coat of approved quality and two coats of oil paintas as

directed by engineer in charge

75 Providing and fixing pre-cast Rubber Dye inter locking concrete block 367.00 Sqmt 686.90

60mm thick with grade of concrete M300 pnumatic

compressed/Vibrated mechanically and as per approved design

confieming to IS 15658: 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per guidelines

of IRC : SP 63-2018 etc complete.

76 Providing and fixing decorative entrance gate made out of cast iron 844.00 Kg 172.71

and various mild steel tabular section combination , the Ornamental

entrance gate should be fixed at compound wall including pattern and

die making , cutting , welding , grinding, fabrication , fixing in position

at compound wall with necessary pedestal, bearing block and other

locking arrangement. The entrance gate should be painted with two

coats of priming coat of paint, and two coat of oil paint etc complete.

As per detail design and instruction of architect.

77 Providing & fixing in position alluminum partition With Door with 6.00 Sqmt 2896.68

standard extruded colored anodized alluminum of approved color

alluminum pipe size 63mm x 38mm x 2mm thick make a frame

vertical and horizontal grid distance as shown in drawing with panel

of 4 mm thick alluminum hardner sheet or 4 mm thick alluminum

hardner sheet and 5mm thick transparent float glass as directed with

glass film fixed with transparent silicon rubber gasket in panel with

glazing clips 19 mm x 19 mm in size . partition opening door shutter

/sliding shutter having a styles 50 mm x 50mm x 2 mm thick in style

and top ,bottom and middle rails 85 mm x 50 mm x 2 mm thick size

with anodized alluminum heavy handle, stoppers, Aldrop, hinges , lock

, door stopper fixtures and fastening with required all labour and

equipment and including rebar up to slab level in half partition and as

per detailed drawing as directed with all lead and lift.

78 Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and 2.00 No 1524.09

getting out the soil and disposal of the surplus excavated soil as

directed within a lead of 50 Meter for following diameter of pipes.(iii)

79 Providing and laying ordinary Cement concrete M-200 and curing 0.50 Cumt 4652.06

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in (d) columns Up to

80 Providing and laying ordinary Cement concrete M-200 and curing 0.70 Cumt 8710.24

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Columns, pillars posts

and struts Ground Floor

81 Providing and laying ordinary cement concrete M-200 and curing 0.70 Cumt 6175.14

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Ground & Plinth BEAMS

82 Providing and laying ordinary cement concrete M-200 and curing 0.70 Cumt 6723.57

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Ground Floor BEAMS

83 Providing and laying ordinary cement concrete M-200 and curing 0.60 Cumt 6829.62

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Ground Floor Slab

84 Brick work using common burnt clay building bricks crushing strength 4.50 Cumt 4295.99

not less than 35 kg/sq.cm. in foundation and plinth in cement mortar

1:6 (1 cement : 6 fine sand)(B)Conventional For Groud Floor

85 Providing & Fixing in position standard extruded approved colour 0.40 Sqmt 1750.33

anodised Aluminum Ventilator with outer frame 65 x 25 mm Stander

Box Frame with 5mm thick Ground Glass Louvers and Fixed Mosquito

Net For ventilation including all required materials, fixtures,

fastenning, labours and equipments as per detailed drawing as

directed. For Ventilators V

86 Providing TMT Bar FE 500D reinforcement for R.C.C. work including 594.00 Kg 76.21

bending, binding and placing in position complete up to All floor Level

87 Providing and Fixing 15 mm thick 300 mm x 300 mm Tactile Warning 3.00 Sqmt 1223.11

Tiles (Attention Tiles i.e. Tactile Warning Surface Indicator {TWSI}) of

Johnsan Endura Tac Button Yellow Plus or equvqlent make in flooring

laid on 20 mm thick cement mortar 1:6 (1 cement : 6 coarse sand) on

new surface and jointed with cement slurry including finished with

flush pointing & cleaning the surface for all floors as per detailed

drawing etc. complete as directed by Architect or Engineer in charge.

Thse tiles shall be Anti Skid, Chemical Resistant, Fade Proof, Frost -

Heat & Weather Proof, High Flexural Strength, Highly Durable, Stain

Resistance . All Tactile Warning Tiles meet the specific size and

dimension standards as required by ISO/FDIS

88 Providing and Fixing a Set of wall mounted 38 mm dia U shaped 2.00 Set 2671.45

horizontal stainless steel collapsible grab bar , 38mm vertical stainless

steel fixed grab rail of grade SS 304 from round pipe supported and

mm dia 8 mm thick SS 304 base flange on wall including anchor

fasteners, nuts, accessories as per detailed drawing etc. complete as

directed by Architect or Engineer in charge.

Rupees Thirty Five Lakh(s) Twenty Seven Thousand Nine Hundred Eighty Two And Paise Ninety One Only

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at

the estimated rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 3527982.91 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Credit Value of Dismentalled Materials of Amount Rs.19696.00 (Rupees Nineteen Thousand Six Hundred Ninety

Six Only) shall be recovered from the 1st Running Bill of the Contractor.

2 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ)

with detailed specification and details of work and amount Involved at site without any payment as directed by

Engineer-In-Charge.

3 All work shall be carried out as per public work department hand book and other specifications of Division or as

4 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by

Contractor under his sign.

5 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for

work under all condition, site, moisture/ weather etc.

6 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per

Government Resolution T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on

recommanding the work order.

7 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by

Executive Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to

8 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other

Construction works walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated

9/12/2005 notification Of Labour & Employment department dt.03/01/2005 & Labou & Employment Department

9 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of

difference of Cement Difference shall be deducted from the rate of original item at the rate of star rate mentioned

10 Contractor are advised to visit site before loading tender rate.

11 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and

drainage & water supply connection and minor correction to perform experienced in Lab shall be done by contractor

at his risk and cost.

12 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to

13 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

14 GST and Income tax TDS will be deducted at a source while making payments of bills.

15 GST will be paid extra as per Govt. amendment.

16 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation

(A) regarding materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other

tender Document of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Valsad (R&B) Sub-Division

Signature of Bidder

Executive Engineer

Valsad (R&B) Division