GE/SMB/T-50/20-21 REPAIR TO SECURITY WALL COMPOUND WALL HARD STANDING AND CONNECTED ITEMS IN ZONE II AND ZONE III AT MIL STN SAMBA

Amount

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles, all as specified .

Demolition of plain cement concrete in ground floors or above ground floor and paving n.exc 15 cm thickness (Below or above ground level)

M&L Brick work with sub class "B" bricks straight or curved on plan exceeding 6 metre mean radius in cement mortar 1:6 , all as specified .

All as per srl item No. 3 above but except bricks.

Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates as in copings, kneelers, apex stones, bed plates, etc. and in similar works including weathering,slightly rounded or chamfered angles and throating and necessary form works,all as specified .

M&L for 75mm thick PCC type C-2, 1:3:6 using (40mm graded aggregate) as in sub base in floor

M&L for PCC 1:3:6 type C-2(using 20 mm graded cr. stone aggr),75mm thick as in plinth protection finished even and smooth without using extra cement layed in bays not exc. 2.00m and joints filled with bitumen sand mastic with ratio (1:3 )complete all as spd & dir.

M&L Machine pressed precast conctete interlocking paver block , rubber moulded, PU coated, glossy finished, any shape and size of 60 mm thickness M-35 Grade with grey cement and pigment over and incl 50mm thick sand cusion complete all as spd.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick/25cm x25cm x25mm thick, Glossy finish, PU coated, set, with grey cement and pigment, jointed and pointed in neat cement slurry in floors over and incl 20mm thick screed bed in CM 1:4, complete all as spd & dir.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete, all as specified.

M&L 15mm thick cement plaster in cement mortar 1:4 on stone masonry surfaces or surface of brickwork and finished even and smooth without using extra cement, all as specified .

M&L for two coats of cement based paints incl preparation to newly plastered surfaces of walls etc completed all as spd & dir.

Preparation of old plastered or unplastered, decorated surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trating oil and greasy spots and applying one coat of colour washing, complete all as specified and directed

Preparation of new plastered surface and applying two coat of colour washing, complete all as specified and directed

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed

M&L one coat of synthetic enamel paint over old steel surfaces incl preparation of surfaces exc.10cm width or girth complete all as specified by Engr- in-Charge

M&L for one coat of weather proof paint on wall and incl preparation of old painted surface, all as specified .

Dismanting of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L Granite work 15 to 18mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) usingmarble dust with admixture of pigment to matchwith shade of granite.

S & F in repair galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at cross with and provision of galvanised mild steel wire, staples or steel pins etc all as specified fixed in repairs (Each line to be measured separately)

Restraining and resecuring including making goodstaples etc of galvanised barbed wire any thicknes and any type(Existing fence)

Taking out steel gate (weight of each gate 150 Kg) with 03x pintle fixed in RCC pillar and refixing the same pintal with RCC pillar and Steel gate with making the new holes in RCC pillar complete all spd and directed by engr in charge.

M/S R S CONSTRUCTION CO

PARGAL CONSTRUCTION CO

M/S BAWA TRADING CO

THAKUR BUILDERS AND CO