Repairing and maintenance work of DM Babglow Jalpaiguri due to change of Occupation under Jalpaiguri Division PWD

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Plaster(towall, floor, ceilingetc.) withsandand cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar (a) 20 mm thick plaster

Rendering theSurfaceofwalls andceilingwithWhiteCement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) sq.m

Applying2coatsofbondingagentwithsyntheticmulti functionalrubber emulsionhavingadhesiveandwaterproofingpropertiesbymixingwithwater inproportion(1bondingagent :4water:6cement)asperManufacturer's specification [Cement to be supplied by the Department]

Removingthicklayersofpaint fromheavilycrackedandblisteredpainted surface of timber by careful burning with blow lamp including smootheningexposedsurfaceof timberwithpumice stoneorglassand preparing the same for fresh treatment.

ApplyingInteriorgradeAcrylicPrimerofapprovedqualityand rand on plastered or cencrete surface old or new surface to receive Distemper/Acrylicemulsionpaint including scrapingandpreparing thesurfacethroughly,completeaspermanufacturer'sspecificationand as per direction of the EIC. (In Ground Floor) (a) One Coat i) Water based interior grade Acrylic Primer

ApplyingAcrylicEmulsionPaint of approvedmakeandbrandonwalls andceilingincludingsandpaperinginintermediatecoatsincludingputty (to be done under specific instruction of Superintending Engineer) : (Two coats) ii) Luxury Quality

Labour for takingout doorandwindowframe includingshutter for repairor replacementofdifferentpartsoftheframe&refixingthesameincludingmending goodalldamaescomplete.(Concreteandbrickworkformendingdamagewillbe paid separately) (a) Upto area 2.5 Sq.m

Woodwork in door andwindow frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exludingcostofconcrete,IronButtHingesandM.Sclamps.(Thequantumshould be correted upto three decimals).(c) Sal : Siliguri.

Panelshuttersofdoorandwindow,asperdesign(eachpanelconsistingofsingle plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (Incaseofnon-supplyofsingleplank,penal rateofreductionof20%willbe made)(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.

P.V.C- False Ceiling : ProvidingFalseCeilingmadewithframeworkofsteel tubeof40mmx20mmof not lessthan18gauge,thelongandcrosssectionwillbeweldedwitheachother 1000mm to 1200mmapart the entire frameworkwill be fixed inwall using rawlplug or gutties or screws etc. and suspended fromceilingwithM.S flat 19mmx3mm as necessary,the entire frame will be painted with red oxide. PRINTED LAMINATEDP.V.CSection150mmx12mmx1.00mm(+/-0.01mm) of approvedquality and colourwill be fixedon the frame so that the entire frameworkwill not bevisible frombelowP.V.CSectionwill be fixedwith the framewiththehelpofselftappingsteelscrewsincludingallmaterialsandlabour charges including fitting,fixing the same andhoisting includingmending the damagesinallrespectandcostofpaintasrequiredasperdirectionofEngineerin-Charge . In ground floor

SupplyingbestIndiansheetglasspanessetinputtyandfittedandfixed withnailsandputtycomplete. (Inall floorsforinternalwall&upto6 m height for external wall) (i) 3 mm thick (weighing 7.4 kg/Sq.m)

Ironbutthingesofapprovedquality fittedand fixedwithsteel screws,withISI mark.(vi) 100mm. X 50mm. X 1.25mm.

(viii) 100mm. X 75mm. X 3.50mm

Supplying, fittingandfixingM.S.clampsfordoorandwindowframemadeofflat bentbar,endbifurcatedwithnecessaryscrewsetc.bycementconcrete(1:2:4)as per direction. (Cost of concrete will be paid separately) (a) 40mm X 6mm, 250mm Length

AnodisedaluminiumAldrop / Slidingbolts of approvedqualitymanufactured fromextrudedsectionconforming to I.S. specification (I.S. 2681/66) fittedand fixed complete. (ii) 250mm x 19mm dia. bolt.

Anodised aluminiumbarrel / tower / socket bolt (full covered) of approved manufactured fromextrudedsectionconforming to I.S. 204/74 fittedand fixed with cadmium plated screws:(ii) 75mm long x 10mm dia. Bolt

(iv) 150mm long x 10mm dia. bolt.

(ii) Door stopper (Anodised aluminium

Anodised aliminiumD-type handle of approved quality manufactured from extruded sectionconforming to I.S. specification (I.S. 230/72) fittedand fixed complete:(b) With round base:(iii) 100 mm grip x 12 mm dia rod

(A)Paintingwithbest qualitysyntheticenamel paint of approvedmake andbrandincludingsmootheningsurfacebysandpaperingetc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface With other than hi-gloss of approved quality(iv) Two coats (with any shade except white)

(b) On steel or other metal surface :With other than hi-gloss of approved quality(iv) Two coats (with any shade except white)

B)Supplying&layingofapprovedmakeandbrandofscratch proof, flexible & homogeneous P.V.C. Vinyle flooring conforming to IS:3462-1982 in required finish, fixedwith syntheticacrylicadhesiveafterpreparingthefloor, levelling& smothaningwhennecessarywith suitable putty, as per the design & instruction of the Engineer-in-charge. (i) 2 mm thick (Plain)

Supplying, fitting&fixing1st qualityCeramic tiles inwalls and floors tomatchwith theexistingwork&4nos. of key stones (10mm) fixedwitharalditeat thebackof each tile& finishing the jointswithwhite cementmixedwithcolouring oxide if required to match the colour of tiles including rougheningof concrete surface, if necessaryorby synthetic adhesive & grout materials etc.(B) Wall WithSandCementMortar (1:3) 15mmthick&2mmthick cement slurry at back side of tiles using [email protected] Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(i) Coloured decorative

Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets(ii) 550 mm X 400 mm size

Supplying, fitting and fixing pedestal of approved make for wash basin (white)

Supplying, fitting and fixing shower of approved brand and make(f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. (b) With 'S' trap

Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) E.W.C.(ii) Plastic (hallow type) white

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.

Supplying, fitting and fixing pillar cock of approved make.e) (i) CP Centre hole Basin mixture with regular spout without popup waste system with 450 mm long braided hoses. (Equivalent to Code No. 5167(B) & Model - FLORENTINE of JAQUAR or similar brand).

e) (ii) CP Wall Mixture without spout but with provision for connnection to Telephone Shower and exposed pipe for Overhead shower (Equivalent to Code No. 5215 & Model - FLORENTINE of JAQUAR or similar brand).

Supplying, fitting and fixing towel rail with two brackets. (a) C.P. over brass(ii) 25 mm dia. and 600 mm long

Supplying, fitting and fixing porcelain toilet paper holder of approved make with wooden spindle as necessary. (i) Roll type size 250 mm X 125 mm

Supplying, fitting and fixing porcelain soap tray of approved make. (i) Recessed soap tray of size 150 mm X 150 mm

Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm

Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).

(b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar bran

(d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).

Washing and cleaning with oxalic acid powder using 33 gms./sq.m. (b) Floor/ dado other than marble

Polishingonlyofoldmarbleorterrazoworkwithoxalicacid powder using 33 gms/ sq.m. bymanual labour / machine where necessary.

Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor)b) In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength > 1500 N

Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. (a) Sink only (ii) 630 mm X 550 mm X 180 mm

Cleaning and removing mud upto 2000 litre Water Tank including masonry reservoir.

Cleaning and disinfecting above 2000 litre Water Tank including masonry reservoir.

Add GST @ 18%

Add Labour Welfare Cess @ 1%

Please Enable Macros to View BoQ information