Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹3.8 LAccepted-AOC KERALA KL | IDUKKI | KERALA | 685533 | l1 | Accepted-AOC l1 | |
| 2 | Rejected-Technical HENNA MANZIL MAVELI PANMANA P O KARUNAGAPPALLY KOLLAM | KARUNAGAPPALLY | KOLLAM | KERALA | - | Rejected-Technical l3 | |
| 3 | Rejected-Technical | - | Rejected-Technical L2 |
Tender Value
₹3.8 Cr
EMD Value
₹9,519
Closing Date
3 Mar 2025, 5:00 pmClosed
AE,PANMANA
OFFICE OF AE,PANMANA
PRO NO 335/24-25 MAINTENANCE OF INTERLOCK IN THE COURTYARD OF PANMANA GRAMA PANCHAYATH
2025_LSGD_741731_1
03/AE/LID EW/PNM/TNDR/2024 /25
Open Tender
Civil Works - Roads
Item Rate
180 days
PANMANA
Please refer Tender documents.
7 documents required · 7 mandatory
₹840
Yes
₹9,519
Yes
31 Jul 2025
22 Feb 2025
5 Mar 2025
22 Feb 2025
3 Mar 2025
22 Feb 2025
Amount
maintenance
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
OD404395/2024-2025:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of stone aggregate single size 6 mm nominal size, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
OD431159/2024-2025:Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of stone aggregate single size 6 mm, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
OD431160/2024-2025:Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of stone aggregate of singl size 6 mm, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost.)
OD431162/2024-2025:Labour engaging for various work
OD431163/2024-2025:Blacksmith for repair works of existing structure
13.52.2:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work
50.2.25.1:Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
15.23.2:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
SUBINSHA S (BID ID -2133592)
NOUSHAD KUTTY (BID ID -2135883)
Bidder Name
NOUSHAD KUTTY
SUBINSHA S
SPA LABOUR CONTRACT CO OPERATIVE SOCIETY LTD NO Q 1727
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1193444.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .