Staff quarter at PHC Mandap Tehsil Dharampur Distt. Mandi (H.P.)

Amount

Excavation in earthwork in hilly area all heights and depths, in all kind of soil by manual /mechnical means including saturated soil comprising of mixed soil, ordinary rock and hard rock. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side, water pollution, etc. and to protect stability of hill side. Rock shall be excavated with chiseling and wedging out rock (where blasting is prohibited). All earth work in cutting/excavation, including rock excavation shall be carried out true to lines, grades, side slopes, width, camber, super-elevation and level as shown on the drawings or as directed by the Engineer-in-charge, in conformity with the requirement of technical specification for Rural Road, August, 2004 and clause 1603.1 and 1603.2 of General Conditions for Contract to achieve designed formation width including hauling and stacking of useful material for construction at suitable sites and safe disposal of unsuitable cut materials in specified manner, trimming, filling of unevenness, blindage and finishing of the road to specified dimensions or as directed by the Engineer-in charge for smooth riding. Any loss to the public and private property during the course of excavation shall be the absolute responsibility of the contractor, which shall have to be duly compensated by him in all cases. Recovery for stones whether usefull or not for 113.66 Cum @ Rupees 170.00 (One Hundred seventy only per cubic metre ) shall be done on prorata basis from each running bill of this item.including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Earth work in excavation for all type of structure such as Retaining walls,breast walls, culverts, drain and parapets etcetera in all type of classification of soil, ordinary rock, hard rock, chiselling/ wedging out rocks ( where blasting prohibited ) as per drawing and M.O.R.D. technical specification clause 305.1 and as per direction of the Engineer -in -charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto all lead and lift including dressing of sides and bottom and back filling in trenches with excavated Suitable approved materials to the orginal surface in layers including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of thedirection of the Engineer -in - charge

Providing and Laying concrete for plain/reinforced concrete P.C.C nominal mix 1:5:10 in open foundations mechinicallly mixed and vibrated complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 and curing complete including the cost of form work and hauling of materials in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing weep holes in brick masonry /stone masonry/plain reinforced concrete abutment,wing wall and return wall with 100mm ( One Hundred milimetres ) dia PVC pipe extending through the full width of structure with slope of 1:20 ( One vertical twenty horizontal ) towords drawing face complete as per drawing and technical specification clause 614.709,1204.3.7 including carriage of materials with all leads and lifts as per direction of Engineer in Charge.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Boulder filling behind R/wall, abutmemnt with hard stone of approved quality in wing wall and return wall a thickness of not less than 600 mm (Six hundred millimetre) with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification Clause 1204.3.8 including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Excavation in foundation, trenches etcetera in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as per directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Filling in plinth with sand under floors including watering ramming consolidating and dressing complete including carriage of material with in all leads and lifts and other incidentials charges.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of 30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting and propping and centring etectera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced and plain concrete work upto all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals:The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

In foundation,footings bases of columns and mass concrete including plinth beam and column upto all floors

In flat surfaces such as soffits of suspended floors,roofs,landing and the like floor upto any thickness

In beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunching below supporting cantilevers girders breasumers and lintels upto any depth /height

In columns, pillars posts and struts square rectangular or polygonal in plan.

In edges of slabs and breaks in floors and walls in any width.

Stair case with sloping or stepped soffits including riser and stringers excluding landing.

Providing and laying cement concrete mechanically mixed 1:6:12 ( One cement : six coarse sand : twelve graded/crushed stone aggregate 40mm (Forty millimetres) nominal size and curing complete excluding cost of form work in parking under floor and plinth beams including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying damp proof course 38mm (Thirty eight milimetres ) thick with cement concrete 1:2:4 ( One cement : two sand : four graded crushed stone agregate 12.5mm ( Twelve decimal five milimetres ) nominal size curing complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Applying a coat of hot bitumen maxaphalt 80/70 (Eighty oblique seventy) or equavalent using 1.70 Kg (one decimal seventy kilogramme) per square metre on damp proof course after cleaning the surface with a piece of colth lightly socked with kerosen including carriage of materials within all leads and lifts and other incidentials charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated cement concrete 1:3:6 (One cement: three sand: six graded/crushed stone aggregate 40mm (Forty millimetre) nominal size) and curing complete but excluding cost of from work in foundation and plinth including including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying mechnically mixed and and vibrated design mix cement concrete of grade M20 ( M- Twenty) to obtain the minimum crushing strength of 20 N/mm2( Twenty Newton per meter square) with minimum cement content of 350.00 kg( three hundred fifty kilogramme) per cubic metre mechanically mixed and vibrated including curing complete excluding the cost of form work and reinforced concrete work upto all floor levels in all heights/ depth including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

in foundations and footings, bases of columns and the like and mass concrete etc.

In suspended floor, roofs landing and shelves and their support, balconies, beams, girders, bressumers and cantilivers upto any floor level.

In columns pillars, posts and struts up to any floor level..

In stair cases(except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto any floor level.

Providing and laying tor steel made of TATA/ SAIL reinforcement for reinforcement cement concrete work including bending, binding straightning and placing in position complete upto all floor level in all heightsincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Precast concrete block masonry including quion blocks joints blocks closer etc, with solid concrete blocks of approved size made of cement concrete 1:3:6 (One cement : Three Sand :Six graded crushed stone aggregate 40mm(Forty milimetres) nominal size in cement mortar 1:6 ( One cement ; six Sand ) in foundation and plinth including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Precast concrete block masonry including quion blocks , Jamb blocks closer etc, with solid concrete blocks of approved size made of cement concrete 1:3:6 (One cement : Three Sand :Six graded crushed stone aggregate 40mm(Forty milimetres) and down gauge in super structure above plinth level upto any floor level inb cement mortar 1:6 ( Omne cement : six sand) including carriage of materials within all leads and lifts and other incidentials charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Precast concrete block masonry in partition all 10cm ( Ten Centimetres ) thick with solid blocks of approved size including quin block, jamb block etc. made of cement concrete 1:3:6 (One cement : Three Sand :Six graded crushed stone aggregate 40mm(Forty milimetres) nominal size including carriage upto floor two level including carriage of materials within all leads and lifts and other incidentials charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Applying cement slurry on reinforced cement concrete slab or cement concrete work using 2.75kg (Two point seven five kilogramme) of cement per square metre of floor area before laying cement concrete flooring including roughening cleaning of the concrete surface complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing in reinforced cement concrete work smooth finishing of the exposed surface with cement mortar 1:3 ( one cement : three coarse sand) in all floor level/ heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying cement concrete 1:2:4 mechnical mixedand and vibrated (One cement :two sand : four graded stone aggregate 20mm (Twenty milimetre) nominal size for RCC Chajjas not exceedig 10cm thickness upto floor two level including finishing exposed surface with cement mortar 1:3 ( one cement: Three sand) to give a smooth and even surface including centering/ form work and curing complete but excluding the cost of reinforcement including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 12mm (Twelve milimetres) thick prelaminated board both side( bwp phenol bonded exterior/interior grade) Action Tesa, Make panelled shutters with frames of Ist class deodar wood for doors including bright finished/ black enamelled iron hinges with necessary screws 40mm ( Forty milimetres ) thick frame including carriage of materials within all leads and lifts and other incidentials charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 19mm (Nineteen milimetres) thick HDHMR water resistant board both side( bwp phenol bonded exterior/interior grade) of ( Action Tesa, make ) shutters for board including nickel plated bright finished paino hinges including fixing of new wooden beads fillets first class Deodar wood including carriage of materials within all leads and lifts and other incidentials charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 90cm ( ninety centimetres ) high hand rail with PVC hand rail supported on 50x6mm(Fifty into six milimetres) flat surface 28cm ( Twenty eight milimetres ) including upper and welded with flat and M.S lugs 30cm ( Thirty centimetres ) embeded in mass concrete work including painting of red lead paint as per architectural drawing and instruction of Engineer-in –Charge.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 40mm (Forty millimeters) thick wire gauge shutters with 2nd (Second) class deodar wood using galvanized M.S. wire gauge of I.S. gauge designation No. 85G (Eight five gauge) in door window and clerestory window with wire of dia 0.56mm (Zero point five six millimeter) for doors windows clerestory windows including bright finished black enameled iron butt hinges with necessary screws complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing anodized aluminium sliding door bolts anodized / powder coated colour or shade with bolts and nuts screws etcetera complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals: The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

300x16mm (three hundred into sixteen millimetres)

Providing and fixing aluminium tower bolts (barrel type) anodized/ powder coated transparent or dyed to required shade and colour with screws including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

250x10mm (Two hundred fifty into ten millimetres)

100x10mm (One hundred into ten millimetres)

Providing and fixing aluminium handles anodized/ powder coated transparent including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

100mm (one hundred millimetres)

75mm (Seventy five millimetres)

Providing and fixing oxidized MS single acting spring hinges 150mm (one hundred fifty milimeters) with necessary screw etc,complete including carriage of materials within all leads, and lifts and other incidentials charges .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing mild steel plain grills of required pattern in wooden/steel frames of window etc, with M.S. flats square bars with round headed bolts and nuts or by including carriage of materials within all leads and lifts and other incidentals charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 50mm ( Fifty milimetres ) bright finished brass cup board or ward robe knob including carriage of materials within all leads and lifts and other incidentials charges.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 100mm ( One hundred milimetres ) bright finished brass floor door stopper with ruber cushion screws etc. complete complete including carriage of materials within all leads and lifts and other incidentials charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing 150 mm ( One hundred fifty milimetre ) bright finished safety hasp and stapples )safety type with necessary screws etc complete including carriage of materials within all leads, and lifts and other incidentials charges . The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 10mm (Ten millimetres) thick antiskid water proof stain and impact resistant heavy duty vitrified tiles Nitco/Kazaria / Somany 600x600mm (Six hundred into six hundred millimetres) manufactured of approved shade and colour in flooring, tread of steps and landings laid over 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : Three coarse sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals in pattern finish approved by the Engineer-in-Charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing Duro stone vitrified tiles 600x600x10mm (Six hundred into six hundred into ten millimetre) of Nitco/Kazaria / Somany of approved coloured shade in skirting risers of steps and dados laid on a bed of 12mm (Twelve millimeters) thick cement mortar 1:3 (One cement : three coarse coarse sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete upto all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals in pattern finish approved by the Engineer-in-Charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying White Glazed tiles of size 300x300mm x 8mm (three hundred into three hundrede into eight millimetres) thick of kajaria/Nitco /Somany in skirting risers of steps and dado 12mm (Twelve millimetres) , cement mortar 1:3 (One cement : three coarse sand) and jointed with flush pointing with white cement complete upto all floor level in all heights including entire carriage of material with in all leads and liftsas directed by the Engineer-in-Charge and including other incidentals in pattern finish approved by the Engineer-in-Charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying 20mm ( Twenty milimetres ) thick white makarna marble work ( Table rubbed and polished ) in flooring 20mm ( Twenty milimetres ) thick Which shall be mirror polished in flooring tread of steps, landings mirror polished of uniform colour laid on 20mm (Twenty millimetres) average thick base of cement mortar 1:4 ( One cement : four coarse sand) laid over and joints with grey cement slurry round with pigment to match the shade of slab including rubbing and polishing complete in all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals in pattern finish approved by the Engineer-in-Charge.

Providing and fixing ceramic tiles 8mm (Eight millimetres) thick in flooring, 300x300mm (Three hundred into three hundred milimetre) size non slipry Nitco/Kazaria/Somany make in pattern finish in flooring, treads of steps laid on a bed of 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement : three coarse sand) finished with flush pointing in white cement upto all floor levels in all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals in pattern finish approved by the Engineer-in-Charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing on wall face PVC 110mm ( one hundred ten milimetre ) (Finolex/Supreme confirming to IS 13592) for rain water pipes of working pressure not less than 4.5 kg/square centimetre ( four point five kilogram per square centimetre ) including filling the joints with approved adhesive complete upto all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 100mm (One hundred milimetres) dia metre. mild steel holders bat clamps of approved design to cast iron or S.C.I. pipes embedded in and including cement concrete block 10x10x10 cm (Ten into ten into ten cantimetres) of 1:2:4( One cement ; Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres) nominal size, and cost of cutting holes and making good the wall etc. including carriage of materials within all leads, lifts and other incidentials charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing on wall face PVC accessories for rain water pipes including filling the joints with approved adhesive including carriage of materials within all leads and lifts and other incidentials charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

PVC plain bend 100mm(One hundred millimeters) dia.

Providing and fixing Single pattern door frame with angle made of TATA/ duresine steel 40x40x4mm ( Forty into forty into four milimetres ) and mild steel flat 40x4mm ( Forty into four milimetres ) including hinges jamb, lock jamb,beed and if required angle thrashold of mild steel angle 50X25 (Fifty into twenty five) millimetres welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 (two point five) millimetres thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing Double pattern door frame with angle made of TATA/ Duresine steel 40x40x4mm ( Forty into forty into two milimetres ) and Two numbers mild steel flat 20x5mm ( Teenty into five milimetres ) with one number flat 50x4mm ( Fifty into four milimetres ) including hinges jamb, lock jamb,beed and if required angle thrashold of mild steel angle 50X25 (Fifty into twenty five) millimetres welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 (two point five) millimetres thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing Double pattern door with Two numbers made of TATA/ duresine steel 40x40x4mm ( Forty into forty into four milimetres ) three numbers mild steel flat 20x5mm ( Teenty into five milimetres ) and one number flat 50x4mm ( Fifty into four milimetres ) and 75x4mm ( Seventy five into four milimetres ) including hinges jamb, lock jamb,beed and if required angle thrashold of mild steel angle 50X25 (Fifty into twenty five) millimetres welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 (two point five) millimetres thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing Providing and fixing Double pattern door frame with Two numbers angle made of TATA/ duresine steel 40x40x4mm ( Forty into forty into four milimetres ) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing Windows frame with channels ,angles made of TATA steel 75x40mm ( Seventy five into forty milimetres ) and flat 75 x 4 ( Seventy into four) millimetres including hinges jamb, lock jamb,beed and if required angle thrashold of mild steel angle 75 x 40 (Seventy five into forty) millimetres welded or rigidly fixed by mechanical means,The standerd rolled steel sections ,joints mitred and welded with 16x3.15(sixteen into three point one five) millimetres lugs 10(ten) centimetres long embedded in cement concrete blocks 15x10x10(Fifteen into fifteen into ten) Centimetres size of 1:3:6 ( One cement: Three sand:six graded stone aggregate 20(twenty) millimetres nominal size) lugs with split end tails to each jamb including steel butt hinges 2.5 (two point five) millimetres thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Windows frames for fixed glazing with 75x40mm ( Seventy five into forty milimetres ) chanells angles 75x40mm ( Seventy five into forty milimetres ) and M.S flat 20x5mm ( Twenty into five milimetres ) including hinges jamb, lock jamb,beed and if required angle thrashold of mild steel angle 75 x 40 (Seventy five into forty) millimetres welded or rigidly fixed by mechanical means,The standerd rolled steel sections ,joints mitred and welded with 16x3.15(sixteen into three point one five) millimetres lugs 10(ten) centimetres long embedded in cement concrete blocks 15x10x10(Fifteen into fifteen into ten) Centimetres size of 1:3:6 ( One cement: Three sand:six graded stone aggregate 20(twenty) millimetres nominal size) lugs with split end tails to each jamb including steel butt hinges 2.5 (two point five) millimetres thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Windows frames for fixing glazing portion with chanel angle made of TATA/ duresine steel 75x40mm ( Seventy five into forty milimetres ) and M.S flat chanells 25x5mm ( Twenty five into five milimetres ) including hinges jamb, lock jamb,beed and if required angle thrashold of mild steel angle 75 x 40 (Seventy five into forty) millimetres welded or rigidly fixed by mechanical means,The standerd rolled steel sections ,joints mitred and welded with 16x3.15(sixteen into three point one five) millimetres lugs 10(ten) centimetres long embedded in cement concrete blocks 15x10x10(Fifteen into fifteen into ten) Centimetres size of 1:3:6 ( One cement: Three sand:six graded stone aggregate 20(twenty) millimetres nominal size) lugs with split end tails to each jamb including steel butt hinges 2.5 (two point five) millimetres thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. including carriage of materials within all leads and lifts and other incidentials charges.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing Windows frames for fixing glazing portion with chanel angle 75x40mm ( Seventy five into forty milimetres ) and two numbers M.S flat 75x4mm ( Seventy five into four milimetres ) and flat 75 x 4 ( Seventy into four) millimetres including hinges jamb, lock jamb,beed and if required angle thrashold of mild steel angle 75 x 40 (Seventy five into forty) millimetres welded or rigidly fixed by mechanical means,The standerd rolled steel sections ,joints mitred and welded with 16x3.15(sixteen into three point one five) millimetres lugs 10(ten) centimetres long embedded in cement concrete blocks 15x10x10(Fifteen into fifteen into ten) Centimetres size of 1:3:6 ( One cement: Three sand:six graded stone aggregate 20(twenty) millimetres nominal size) lugs with split end tails to each jamb including steel butt hinges 2.5 (two point five) millimetres thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing steel glazed door, windows and ventilators shutters made of TATA/ duresin esteel of standard rolled steel sections fo San Harvic, Steelman Industries, PD Industries, Metal Windows, Chandni Industries, Ganpati Udyog (Rajpura). joints mitred and welded with 16x3.15 lugs 10mm long providing and fixing of glass panes with glazing clips and special materials putty of approved make providing hold fast complete applying a priming coat of red lead paint including carriage of materials within all leads and lifts and other incidentials charges.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Side hungs windows.

Providing and fixing steel wire guage doors windows and clerestory window shutters of standard rolled steel sections San Harvic, Steelman Industries, PD Industries, Metal Windows, Chandni Industries, Ganpati Udyog (Rajpura). joints mitred and iron fitting including providing and fixed galvanised M.S wire guage of I.S guage designation 85G with wire of dia 0.56mm ( Zero point fifty milimetres ) with M.S flat beading complete and applying a coat of approved steel primer after treatment of the surface as directed by incharge including carriage of materials within all leads and lifts and other incidentials charges.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Side hungs windows.

Supplying and fixing 3mm ( three milimetres ) glass panes madeof Modi Float, Saint Gobind, Aashai make with putty and nails including carriage of materials within all leads and lifts and other incidentials charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter with white enamel paint (ASAIN/NEROLAC/ICI-DULUX ) complete as directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts and including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with readymixed paint, brushing to give an even shade including cleaning of all dirt, dust and other foreign matter, coarse sand papering and stopping with readymixed paint white ( ASAIN/NEROLAC/ICI-DULUX ) complete including entire carriage of material with in all leads and lifts and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

6mm (six millimeter) cement plaster to ceiling with cement mortar 1:4 (one cement : four sand) including carriage of materials within all leads and lifts and other incidentials charges.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

15mm (Fifteen millimetres) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers, and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:6 (One cement : six sand) upto all floor level in all heights and curing complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Rulled pointing on square rubble,coursed or un-coursed stone masonry with cement mortar 1:4 ( One cement :Four Sand ) including carriage of materials within all leads and lifts and other incidentials charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

White washing with lime on undecorated wall surface two coats to give and even shade including thoroughly brooming the surface to remove all dirt, dust mortar dirt and other foreign matter including carriage of materials within all leads and lifts and other incidentials charges.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Distempering two coats with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture ( ASAIN/NEROLAC/ICI-DULUX ) after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and coarse sand papered smooth priming coat with distemper primer upto all floor level in all heights including entire carriage of material with in all leads and lifts and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on un-decorated wall surfaces (Two coats ) (ASAIN / NEROLAC / ICI- DULUX ) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials within all leads and lifts and other incidentials charges.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : three sand : six graded crushed stone aggregate 20mm (twenty millimeter) nominal size) including carriage of materials within all leads and lifts and other incidentials charges.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing under layer for plinth protection of 75mm (seventy five millimeter) thick (unconsolidated) bed of dry brick/stone aggregate 40mm (forty millimeter) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground and carriage of materials within all leads and lifts and other incidentials charges.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Constructing course rubble hammer dressed U-Shape open surface drain with side wall 15x22cm (fifteen into twenty two centimeter) in cement mortar 1:6 (one cement : six sand) and inside plastering with cement plaster 1:3 (one cement : three sand) including earth work and laying 10cm (ten centimeter) thick cement concrete 1:5:10 (one cement : five sand : ten graded crushed stone aggregate 40mm (forty millimeter) nominal size) and 7.5cm (seven point five centimeter) cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate twenty millimeter nominal size) and finished with a floating coat of neat cement complete as per standard drawing/design with in all leads, lifts and carriage of materials within all leads and lifts and other incidentials charges.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing vitreous china wash down water closet squatting pan (Indian Type W.C. pan) size 580x440mm mm (Five hundred eighty into four hundred forty millimetres) (Earth Work, bed concrete foot rest and trap to be measured and paid for separately) (Orrissa Pattern) in white shade I.S.I. marked of Hindware/Parryware /CERA including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 10.00 (Ten litres) viterous china PTMT white high PVC (full flush) flushing cistern of I.S.I. marked of Cera/ Hindware/Parryware with a pair of C.I. or mild steel brackets complete with fitting such as lead valve, syphon 15mm (Fifteen millimetres) nominal size brass/PVC ball valve with polythene float, with push button unions and couplings for connection with inlet and outlet and over flow pipe 40mm (Forty millimetres) dia CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 550mmx400mm (Five hundred fifty into four hundred millimetres) vitreous china wash basin with single hole for pillar tap with CI or M.S. brackets painted white including cutting holes and making good the same but excluding fittings of case or its equivalent flat back including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing stainless steel kitchen sink of approved quality (Hindware/Diamond/ Prayag/Cera ) ISI marked drain board and CP waste with CI or MS bracket painted white including cutting holes and making good the same but excluding of fitting 610x460 x 2 mm (six hundred ten into four hundred sixtyinto two milimetre ) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 32mm (Thirty two millimeter) dia CP brass waste pipe for wash basin or sink including brass check nut complete including carriage of materials within all leads and lifts and other incidentials charges.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 32 mm (Thirty two millimetres) dia M.I. Union for wash basin or sink ,KS,AMCOAVR,HVR,RR,SUWmake including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 600mmx450mm (Six hundred into four hundred fifty millimetres) bevelled edge mirror ( Exotica make ) of superior glass mounted on 6mm (Six millimetres) thick Asbestos cement sheet or plywood sheet and fixed to wooden plugs with CP brass screws and washers complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 600mm x120mm (Six hundred into one hundred twenty millimetres) glass shelf Jaquar (ACN-1111NM ) JAL, ESS ESS make approved by Engineer-in-Charge with CP brass bracket and guard rail complete fixed to wooden plugs with CP brass screws etc. complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing chromium plated brass soap dish (ACN-1131N) with CP brass brackets fixed to wooden cleats with CP brass screws etcetera complete including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing CP brass bib tap 15mm (Fifteen millimetres) dia ( Superior heavy type ) of Jaquar/Hindware (COSMO/Aspive )/ CERA/HINDWARE made including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing CP Brass pillar tap with capstan head 15mm (Fifteen millimetres) dia of Jaquar ( OPAL Series) Hindware/Cera including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing brass stop cocks 15mm (Fifteen millimetres) dia of Jaquar ( OPAL Series) or its equivalent in Hindware/Cera including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing P.V.C. connection with brass unions 300/450 mm length 15 mm nominal bore including carriage with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 32mm (Thirty two millimeter) nominal bore C.P. Brass waste and plug for glazed ware sink,basin etc. with long screwed shanks and fly nuts and fixed to lead pipe including vulcanite plug,brass chain and stud with union for lead pipe in addition and fixed including one soldered joint including carriage of materials within all leads and lifts and and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 15mm (Fifteen millimetres) nominal dia brass full way valve with wheel ( heavy duty )including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing PVC water storage tank of Sintex tripple layer make (I.S.I. marked five layer) 1000 (One thousand) litre capacity with 40mm (Forty millimetres) nominal size bore galvanized mild steel scour tube with fittings 25mm (Twenty five millimetres nominal bore) galvanized mild steel overflow pipe with fittings and mosquito proof coupling of approved design 15mm (Fifteen millimetres nominal bore ball valve and mosquito proof PVC cover with locking arrangement including providing pads of required size of inlet or outlet, compete in all respect including hoisting upto all heights above ground level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 110 mm x 90 mm (one hundred ten milimeters into ninety mi,imeters) PVC Finolex make floor trap working pressure 6.00 Kg per square centimetre (six kilogram per square centemtre) I.S.I. marked of self cleaning design including fixing with approved adhesive including cost of cutting and making goods the walls and floors etc. complete upto all floor level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 32 mm dia (thirty two milimeters) PVC waste pipe flexible (coil pipe) length not less then 800 mm(eight hundred milimeters) including carriage of material with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing jet with 1.50 mtr. ( one point five metre ) long flexible tube 8mm (eight milimetre ) dia chrom finish with wall hook complete hard shower ( Health faucet ) ALD-597 of Jaguar its equivalent in Hindware/Cera and approved by Engineer-in-Charge including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 110 ( One hundred ten ) millimetre dia chromium plated grating of complete PVC Finolex/Supreme pipe working pressure not less than 6 Kg/square centimetre (Six kilogram as per square centemetre) confirming to IS 13592 ISI marked for floor, gully or nahani trap including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

Providing and fixing high pressure 110mm (one hundred ten milimeters) PVC spigot and socket, waste Finolex/Supreme working pressure 6.00 Kg square centimetre (six kilogram per square centemtre) ISI marked including fixing with aproved adhesive etc. complete including carriage of materials within all leads, lifts and other incidentials charge.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 110 mm dia (one hundred ten milimeters) PVC single equal branch with oval access doorFinolex/Supreme , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked complete including fixing with approved adhesive etc. complete including carriage with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC door bend with oval access door, insertion rubber washer 3mm (three milimetre) thick bolts and nuts ISI marked complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 110mm (One hundred ten millimetres) nominal size PVC collar complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including carriage with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing PVC single equal branch plain bend ISI marked with oval access door, complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etc. complete including carriage with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 110 mm dia (one hundred ten milimeters) PVC clampscomplete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked of approved design with steel screw and rawal plugs etc. complete including carriage with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 15mm (Fifteen millimetres) nominal bore to wall ceiling and floor galvanized mild steel tubes (Medium Grade) of Jindal Make tube fitting and clamps including making good the wall ceiling and floor upto all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 20mm (Twenty millimetres) nominal bore to wall ceiling and floor galvanized mild steel tubes (Medium Grade) made of TATAMake tube fitting and clamps including making good the wall ceiling and floor upto all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Constructing manhole with RCC top slab in 1:2:4 mix (One cement : two coarse sand : four graded/crushed stone aggregate ) 20mm (Twenty millimeters) nominal size foundation concrete 1:4:8 ( One cement : four coarse sand : eight graded/crushed stone aggregate 40mm (Forty millimeters) nominal size) inside plastering 15mm (Fifteen millimeters) thick with cement mortar 1:3 (One cement : three coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( One cement : two coarse sand : four graded/crushed stone aggregate 20mm (Twenty millimeters nominal size) finished smooth complete in all respect including curing and testing Inside size 800mmx800mm and 1.00mtr (Eight hundred into eight hundred and one metre) deep including C.I. cover with frame (Light duty single seal : Pattern) 455mmx 610mm (Four hundred fifty five into six hundred ten millimeters) internal dimensions total weight of cover and frame to be not less than 38kg (Thirty eight kilogramme) weight of cover 23kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramme) with 200mm (Two hundred millimeters) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( One cement : three coarse sand) including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Prithi Raj Thakur

Sunil Kumar