Upgradation of water sport building 2nd floor at luhnoo Bilaspur

Amount

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.

Demolition above G.L.upto floor two level including disposal of unserviceable materials within 20 metres lead. un-reinforced cement concrete upto 15cm. Thickness.

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within 20 metres lead

Providing and laying cement Conc. Work 1:2:4 (1 cement :2sand :4 graded stone agg. 20mm nominal size) and curing complete excluding cost of form work and reinforced conc. Work in: Foundation , footing bases of column and the like and mass conc.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like

Flat surfaces such as soffits of suspended floors, roofs, landings and the like.

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level :

Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement for feinforced concrete work in

Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint.In gratings framed guard bars,ladders,railling,brackets and similar works. In gratings framed guard bars,ladders,railling,brackets and similar works.

Providing and laying Duro stone vetrified tiles (300x300mmx10mm) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.

Providing and laying Duro stone vetrified tiles (300x300mmx8mm) in grey/coloured of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.

Repairs to Plaster in Patches of 2.50 sq.mt. and under and 10 to 15mm thick including cutting the patch in propre r shape and replastering the surface of the wall including disposal of rubbish to the dumping round within a lead of 20 m with;

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge.

For doors windows and ventilatiors and glazed partitions frames.

For shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittingswhere ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.

Glazing with glass panes of 5.50mm thickness (weight not less than 13.75 kg/ sqm.

Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete

Providing and fixing aluminium anodised powder coated pattern to existing window/ventilatior with 80mmx80mm panels holes with 25x8mm thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in alluminium channels base frames (Aluminium channels base frames to be measured and paid for separately)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS 6315) for aluminium door including cost of cutting floor as required embedding in floors and cover plates etc. complete as per the direction of Engineer-In-Charge I/c making good the floors.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

Removing white wash or colour wash by steel wire brushing and/or scrapping sand papering and preparing the wall surface smooth including necessary repairs to scratches complete.scraping on ceiling and / or sloping roofs.

Removing white wash or colour wash by steel wire brushing and/or scrapping sand papering and preparing the wall surface smooth including necessary repairs to scratches complete.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer

Painting Two coat (excluding priming coat)on wood and wood based surfaces with black japan paint to give an even shade including cleaning of all dirt,dust and other foreign matter

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete.s 300x16mm

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete. 250x10mm

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete.

Providing and fixing bright finished hard drawn hooks and eyes. 250 mm

P/F 12 mm thick prelaminated board both side bwp phenol bonded exterior/interior grade shutters withframe of 1st class deodar wood for cup board including nickel plated bright finished piano hinges -25mm thick frame.

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete)

Providing and fixing bright finished brass handles with screws etc. complete

Readymixed paint brushing wood primer pink

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping With enamel paint other than white

Providing and fixing vitreous China wash down,water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately):-Anglo Indian Universal closet

Providing and fixing PVC floor trap of sell cleaning design with sand cost (iron screwed down or inged grating with or without vent iron complete including cost of cutting and making good the walls and floors including carriage of materials in all leads and ligts (110x90 mm dia).

Providing and fixing ISI marked high pressure PVC pipes spigot and socket waste and ventilating pipes including fixing with approved adhesive complete .

110 mm (one hundred Ten millimetre) dia

Providing and fixing PVC plain bend 110 mm (one hundred Ten millimetre) dia ISI marked including fixing with approved adhesive etc. complete .

Providing and fixing PVC 'P' or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete. 110 mm dia .

Providing and fixing white glazed fireclay stall urinal with automatic C.I. Flushing cistern (of approved make ) with fittings R.S. or C.I. Brackets standard size C.P. brass flush pipe spreaders with unions and clamps (all in C.P. brass) C.I. Trap with outlet grating and other coupling in C.P. brass including painting of cistern and fittings, cutting and making good the walls and floors where required :- Range of two stall urinals with 10 litres C.I. automatic flushing cistern.

Providing and fixing PTMT Coloured / white automatic flushing cistern with a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same ( over flow pipe to be measured and paid for separately). 10 litres net capacity.

P/F vitreous china wash basin with single hole for pillar top with C.I. Or M.S. bracket painted white I/c cutting holes and making good the same but excluding fitting flat back I/c carriage of materials in all leads and ligts No.10001 of size 550x400 cm of find ware or equivalent (white shade).

Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings .

Providing and fixing rubber plug for sink/ wash basin complete 32mm (Thiry two millimetre) dia .

Providing and fixing C.P. brass waste for wash basin/sink.

32mm dia

Providing and fixing M.I. Union for wash basin or sink .

32mm dia

Providing and fixing 600x450 mm bevalled edge mirror of suparior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and wahers

Providing and fixing C.P. brass towel rail complete with C.P.brackets fixed to wooden plugged of size 750x20mm .

Providing and fixing 600mmx120mm (Six hundred milimetre into one hundred twenty milimetre) glass shalf with C.P. brass bracket and guard rail complete fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing CP brass toilet paper holder including carriage of materials in all leads and lifts.

Providing and fixing Charomiun plated C.P. brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws .

Providing and fixing CP brass bib tap with capstan head 15mm f(fifteen millimetres) including carriage of materials in all leads and lifts as directed by the Engineer-in-charge.

Providing and fixing CP brass pillar tap with capadtan head 15mm (fifteen millimetres) including carriage of materials in all leads and lifts as directed by the Engineer-in-charge.

Providing and fixing CP brass angle bolve 15mm (fifteen millimetres) with out nuts and pipe including carriage of materials in all leads and lifts as directed by the Engineer-in-charge.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes medium grade tube fitting and clamps including making good the wall ceiling and floor including carriage of materials with in all leads and lifts as per direction of Engineer-in -charge

GI pipe 15mm bore

GI pipe 20 mm bore

Providing and fixing CP Jet sprey of approved quality.

Providing and fixing PVC single equal branch of required degree with oval access door insertion rubber washer 3mm (Three millimetre) thick

110 mm( One hundred millimetre) nominal size.

Providing and fixing PVC door bend 110 mm (one hundred ten millimetre) dia oval access door insertion rubber washer 3mm (Three

110mm.(One hundred ten milimetre).

Providing and fixing PVC clamps of approved design with steel screws and rawal plugs etc. complete 110 mm (one hundred Ten millimetre)

Providing and fixing pvc storage tank complete with 40mm nominal bore galvanised mild steel tube with fitting 25mm nominal bore galvanised steel over flow tube with fitting and mosquito proof coupling of approved municipal design 15mm nominal bore ball valve and mesquito proof galvagised mild steel cover with looking upto a height of 10metres above ground level.

Pvc water storage tank 1000litre

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. In gratings framed guard bars, ladders,railling ,brackets and similar works.

Painting two costs (excluding priming cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters : Enamel paint other than white

Construction brick masonry chamber for undergound C.I. inspection chamber and bends with common burnt clay building bricks in cement mortar 1;5 (1cement 5sand 0 C.I. cover with frame 9light duty 355mm x 610mm internal dimensions total wight of cover with frame to be notless than 38kg (weight of cover 23kg and weight of frame 15kg ) R.C.C. top slab with 1:2:4 mix (1cement 2sand and 4 graded stone aggregate 20mm nominal size) inside plaster 15mm thick with cement mortar 1:3 (1 cement 3sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete inside dimensions 455mmx 610x 450mm deep single pipe line.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Vipan Thakur

DEEPAK SHARMA

vishal thakur govt contractor

PARDEEP SAINI CONTRACTOR

VINOD KUMAR

SATENDER KUMAR

Sanjay Saini

Pawan Kumar

Jagjeet Singh