SITC OF 15 PASSENGER LIFT (ELEVATOR) 3 STOP (G 2) AT SHREE DEV SUMAN HOSPITAL, NARENDRANAGAR

Amount

Supply Installation Testing an Commisinoing of 15 Passengers Elevator, 1020 kg, G+2 ,(3 Stop), Machine Room Less , Reverse opening on Level 0,1 and 2 and front opening only at level 0, speed 1m/s, Opening SS finish with SS mirror finish centre panel and all corners in SS finish, two-panel centre opening Doors , complete in all respects as per Specification Attached.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required

Group C

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Upto 450 mm sweep

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way , Double door

Supplying and fixing 5 amps. to 32 amps.rating 240 volts 'c' series, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

(a) Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Earthing with copper earth plate 600mm x600mm x3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc., ( with charcoal or coke and salt) complete as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Upto 35 sq. mm

Supply of Exhaust fan 300mm , 240V, as approved by Engineer in charge with making connection complete in all respect.

Supply of water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in all respect.

Supply of aluminium conductor PVC/XLPE insulated armoured served sheathed cables 1100 Volts 25 Sqmm X 3.5 Core.

SHREE BALAJI ASSOCIATES